You have now installed the GPRS connection. To connect to the GPRS network, follow steps 1 to 3:
1)Go to ‘My
2)Type the user name and password provided by your network operator and verify that the telephone number is *98#. Then press ‘Connect’.
3)Once you are connected, you may use your connection as an ordinary Internet connection.
Note: if your network operator has provided you with a Proxy Address, you should configure your Web browser (Internet Explorer, Netscape, etc.) accordingly.
Windows NT GPRS set-up
Warning!: your PC must have the Remote Access Service and the TCP/IP protocol installed within the network components. You can check this in ‘Start-