Maytag W10240116A warranty Dishwasher Care, Troubleshooting

Dishwasher Care

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended - Stainless Steel Cleaner and Polish Part Number 31462.

Clean the interior of the dishwasher, with a paste of powdered dishwasher detergent and water or use liquid dishwasher detergent on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe measuring cup on the bottom rack. Run the dishwasher through a complete washing cycle using an air-dry or an energy-saving dry option. Do not use detergent. Vinegar will mix with the wash water.

If you have a drain air gap, check and clean it if the dishwasher isn't draining well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. In the winter, if the dishwasher could be exposed to near freezing temperatures or is left in a seasonal dwelling such as a second home or vacation home, avoid water damage by having your dishwasher winterized by authorized service personnel.

Troubleshooting

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

PROBLEM	SOLUTION
DISHWASHER DOES	NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle.
NOT RUN	If the START/RESUME light is blinking, press START/RESUME and close the door firmly within
	3 seconds. For fully integrated models (controls on top of console).
	Be sure the door is closed and latched.
	Be sure you have selected a cycle. (See “Cycles and Options Descriptions.”)
	Be sure there is power to the dishwasher. A circuit breaker or fuse may have tripped.
	If lights other than START/RESUME blink and the unit will not run, you will need to call for service.
DETERGENT REMAINS IN THE	Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that may be
DISPENSER OR	blocking the detergent dispenser from opening properly.
TABLET IS ON BOTTOM	Be sure your detergent is fresh and lump free.
OF TUB
	Be sure the cycle has completed (green light is on). If it has not completed, you will need to resume
	the cycle by pressing START/RESUME and closing the door within 3 seconds.
CYCLE RUNS TOO LONG	NOTES:
	■ To use less water and reduce energy consumption you will encounter cycles that typically run
	for up to 3 hours.
	■ A water heater setting of 120°F (49ºC) is best. The dishwasher will delay longer while heating
	cooler water.
	■ Some options will add time to the cycle. (See “Cycles and Options Descriptions” section.) The
	Heated Dry option adds ½ hour.
	Try the Insta Wash cycle.
	Run the hot water at a faucet close to the dishwasher before starting the cycle.
DISHWASHER NOT DRYING	NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous
	surface which tends to collect water droplets. Towel drying may be necessary.
	Use of rinse aid along with the Heated Dry option is needed for proper drying.
	Use of the High Temp Wash option will improve drying results.
	Proper loading of items can affect drying. (See specific loading instructions within this guide.)
	Glasses and cups with concave bottoms hold water. This water may spill onto other items when
	unloading.
	■ Unload the bottom rack first.
	■ Locate these items on the more slanted side of the rack for improved results.
WILL NOT FILL	Be sure the water is turned on to the dishwasher.
	Check that the float is free from obstructions.
	Check for suds in the dishwasher. If foam or suds are detected, the dishwasher
	may not operate properly or may not fill with water.

9