Maytag MDB6709AWW Connect drain hose, Waste disposer with air gap, Waste disposer no air gap

Page 9

3 Connect drain hose

Connect drain hose to waste tee or waste disposer

Option C, Waste disposer – with air gap

Waste disposer – with air gap

using one of the following options:

•Option A, Waste disposer - no air gap

•Option B, No Waste disposer - no air gap

•Option C, Waste disposer - with air gap

•Option D, No waste disposer - with air gap

IMPORTANT: The drain hose connection of the disposer or a waste tee must be made before the drain trap and at least 20" (50.8 cm) above the floor where the dishwasher will be installed.

Screw-type clamps

Disposer inlet

Air gap

Large silver drain hose clampl (provided)

Rubber hose connector

Drain hose

Helpful Tip: To reduce vibration of the hose, keep the hose away from the floor.

Option A, Waste disposer – no air gap

Drain trap

Waste disposer – no air gap

Disposer inlet

 

Large silver

 

drain hose clamp

 

 

Drain hose

 

 

 

Drain trap

1

1. Using a hammer and screwdriver, knock

plug into disposer.

1

2

3Black end

4

1. Using a hammer and screwdriver, knock

plug into disposer.

2. Use needle-nose pliers to remove plug.

3. Connect black end of drain hose to air gap

and cut if needed.

NOTE: Do not cut ribbed section.

4. Attach drain hose to air gap with large

silver drain hose clamp (provided). Use

pliers to squeeze clamp open and move

into position. If the drain hose was cut, use

a 1¹⁄₂" to 2" (3.8 to 5 cm) screw-type clamp

2

2. Use needle-nose pliers to remove plug.

3. Attach drain hose to disposer inlet with

5

(not provided).

5. Use a rubber hose (not provided) with

screw-type clamps (not provided) to

connect from air gap to disposer inlet.

3large silver drain hose clamp (provided). Use pliers to squeeze clamp open and move into position.

Option B, No waste disposer – no air gap

No waste disposer – no air gap

 

ScrewLarge-silvertype

 

drain clamphose clamp

 

Waste tee

 

Drain hose

 

Drain trap

1 Black end

1. Connect black end of of drain hose to waste

tee and cut if needed.

 

NOTE: Do not cut ribbed section.

2

2. Attach black end of drain hose to waste tee

with a large silver drain hose clamp (provided).

Use pliers to squeeze clamp open and move

 

 

into position. If the drain hose was cut, use a

 

1¹⁄₂" to 2" (3.8 to 5 cm) screw-type clamp (not

 

provided).

Option D, No waste disposer – with air gap

No waste disposer – with air gap

Air gap

Screw-type clamps

Large silver drain

 

hose clamp

 

(provided)

Waste tee

Rubber hose

 

connector

 

Drain hose

 

Drain trap

1 Black end

1. Connect black end of drain hose to air gap

 

and cut if needed.

 

 

 

 

NOTE: Do not cut ribbed section.

 

 

 

 

2. Attach drain hose to air gap with large silver

 

 

 

 

 

2

 

 

drain hose clamp (provided). Use pliers to

 

 

 

squeeze clamp open and move into position.

 

 

 

If the drain hose was cut, use a 1¹⁄₂" to 2"

 

 

 

 

(3.8 to 5 cm) screw-type clamp (not

 

 

 

 

provided).

 

3

 

 

3. Use a rubber hose (not provided) with

 

 

 

 

screw-type clamps (not provided) to

 

 

 

 

connect from waste tee to air gap.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Table des matières W10290309A You Need to Table of ContentsLocation Requirements Tools and PartsMinimum, measured from narrowest point of opening Product and Cabinet Opening DimensionsWater Supply Requirements Drain RequirementsElectrical Requirements Use of air gapPrepare Cabinet Opening-New Utilities Prepare Cabinet Opening-Existing UtilitiesPrepare and Route Water Line Install Drain Hose Waste disposer with air gap Connect drain hoseWaste disposer no air gap No waste disposer no air gapPrepare Dishwasher Power Cord-Route cord into terminal box Make Power Supply Cord ConnectionPower Supply Cord- Connect ground wire Power Cord-Connect remaining wiresDetermine Cabinet Opening Choose Attachment Option Install the Door Handle on some modelsMove Dishwasher into Cabinet Opening Connect to Water Supply Slide clamp onto connector Make Direct Wire Electrical ConnectionDirect Wire-Route cable into terminal box Connect to DrainDirect Wire-Connect remaining wires Direct Wire-Connect ground wireDirect Wire-Secure cable in conduit connector Direct Wire-Reinstall terminal box coverSecure Dishwasher in Cabinet Opening Reinstall access panels Complete InstallationRemove towel and replace lower dishwasher rack Check lower panel edgeReconnect power Power supply cord-Plug into a grounded 3 prong outletCheck Operation If Dishwasher Does Not OperateTable des matières Instructions d’installation suiteProcessus à appliquer Préparation de la cavité dencastrementOutillage et pièces Exigences d’emplacementDimensions Produit et cavité d’encastrement En gris sur les parois de la cavité d’encastrementMinimum à l’endroit le plus étroit de la cavité Spécifications de l’alimentation en eau Spécifications de l’évacuationSpécifications électriques Utilisation d’un brise-videFermer l’arrivée d’eau Déconnecter la source de courant électriqueMoyens de raccordement aux divers circuits déjà existants? Quel type de raccordement électrique sera utilisé?Câblage direct Perçage du trou Cordon d’alimentation Préparation du trouCâblage direct Préparation du trou Câblage direct Acheminement du câbleInstallation de la canalisation dalimentation Installation du tuyau d’évacuationInstallation du tuyau d’évacuation Purge de la canalisation d’eauBroyeur à déchets pas de brise-vide Raccordement du tuyau d’évacuationBroyeur à déchets avec brise-vide Pas de broyeur à déchets pas de brise-videPréparation du lave-vaisselle Attachez l’isolationDépose des panneaux Raccordement électrique Cordon d’alimentation Installation du serre-câbleÔter le couvercle du boîtier De connexion électrique Cordon d’alimentation Conducteur de liaison à la terreConfiguration de câblage Dimensions de la cavité d’encastrementMesure des dimensions Tableau de réglage Hauteur du lave-vaisselleChoix de l’option de fixation Installation de la poignée de porte sur certains modèlesDéplacement du lave-vaisselle à proximité de louverture Installer le bouton en plastiqueLigne en pointillés Plier la languette montage latéralInsertion du lave-vaisselle dans la cavité d’encastrement La tension des ressortsContrôle de l’aplomb et réglage des pieds si nécessaire IsolantRaccordement à l’égout Raccordement à la canalisation d’eauRaccorder le raccord coudé de 90 à la valve Recherche de fuitesBride de tuyau position finale Raccordement électrique Câblage directCâblage direct Acheminement jusqu’au boîtier de connexion Câblage direct Raccordement des autres conducteursCâblage direct Immobilisation dans le connecteur de conduit Extraction du panier inférieur utilisation d’une servietteSerrer les vis du serre-câble pour immobiliser le câble Achever linstallation Serrage des vis Inspection de la rive de panneau inférieureReconnecter la source de courant électrique Reconnecter la source de courant électriqueSi le lave-vaisselle ne fonctionne pas Contrôle du fonctionnementConseils additionnels W10290309A

MDB6709AWW, W10290309A specifications

The Maytag W10290309A, commonly known as a replacement part for the MDB6709AWW dishwasher series, showcases a blend of reliability and efficiency in home appliances. This specific part is essential for maintaining the performance of the MDB6709AWW model, which is designed with the user in mind, offering innovative technologies and features that streamline dishwashing tasks.

One of the standout features of the MDB6709AWW is its robust construction, which is reflective of Maytag's dedication to durability. Built with high-quality materials, it is designed to handle the rigors of daily use while maintaining its efficiency. This model operates with a powerful motor, ensuring that dishes are not only clean but also sanitized. The performance is enhanced by the Precision Dry option, which ensures that your dishes come out bone-dry, eliminating the need for towel drying.

The MDB6709AWW also includes the power of the Soil Sensor technology. This feature automatically adjusts the wash cycle based on the level of soil detected on the dishes, ensuring optimal water usage and energy efficiency. This smart technology not only saves on utility bills but also contributes to environmental sustainability.

Another characteristic that sets the MDB6709AWW apart is the dedicated rinse aid dispenser. This dispenser effectively helps in preventing spots and film build-up on dishes, ensuring a spotless finish after every wash. The beauty of this feature is that it minimizes the need for manual rinsing before loading, saving precious time.

The ADA-compliant design of the Maytag MDB6709AWW ensures that it is accessible to all users, making it a great choice for families and individuals alike. The intuitive control system allows for easy operation, with clearly labeled options for various wash cycles, temperatures, and settings.

Moreover, the quiet operation of this dishwasher is a noteworthy aspect, making it suitable for open-concept living spaces. With sound dampening technology, this unit operates at minimal noise levels, allowing you to carry on with your daily activities without disruption.

In summary, the Maytag W10290309A and the MDB6709AWW dishwasher embody a combination of advanced technologies, user-focused design, and reliable performance. With features like the Precision Dry, Soil Sensor technology, and a durable build, it's easy to see why this model is trusted in households. Whether you are washing a few items or a full load after a family dinner, this dishwasher promises to deliver outstanding results with every cycle.
Top Page Image Contents