Maytag W10282553A Drain Requirements, Water Supply Requirements, Electrical Requirements

Page 5

Drain Requirements

•A new drain hose is supplied with your dishwasher.

If the drain hose is not long enough, use a new drain hose with a maximum length of 12’ (3.7 m) (Part Number 3385556) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

•Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

•Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above subfloor or floor.

Use of air gap

Air gap

•Use ¹⁄₂" minimum I.D. drain line fittings.

•If required, the air gap should be installed in accordance

with the air gap installation instructions. When connecting the air gap, a rubber hose (not provided) will be needed to connect to the waste tee or disposer inlet.

Water Supply Requirements

•A hot water line with 20-120 psi (138-862 kPa) water pressure can be verified by a licensed plumber.

•120°F (49°C) water at dishwasher.

•³⁄₈" O.D. copper tubing with compression fitting or

flexible braided water supply line (Part Number 4396897RP) NOTE: ¹⁄₂" minimum plastic tubing is not recommended.

•A 90° elbow with ³⁄₈" N.P.T. external pipe threads on one end.

•Do not solder within 6" (15.2 cm) of the water inlet valve.

Electrical Requirements

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70 - latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from: National Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169

You must have:

•120-volt, 60 Hz, AC-only, 15- or 20- amp, fused electrical supply.

•copper wire only.

We recommend:

•a time-delay fuse or circuit breaker.

•a separate circuit.

If connecting dishwasher with a power supply cord:

•Use UL listed power supply cord kit (Part Number 4317824) marked for use with dishwasher.

•Power supply cord must plug into

a grounded 3 prong outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

If connecting dishwasher with direct wiring:

•Use flexible, armored or nonmetallic sheathed,

copper wire with grounding wire that meets

the wiring requirements for your home and local codes and ordinances.

• Use a UL Listed/CSA Approved strain relief.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Table of Contents Table des matières W10282553A You Need to Table of ContentsLocation Requirements Tools and PartsMinimum, measured from narrowest point of opening Product and Cabinet Opening DimensionsWater Supply Requirements Drain RequirementsElectrical Requirements Use of air gapPrepare Cabinet Opening-New Utilities Prepare Cabinet Opening-Existing UtilitiesPrepare and Route Water Line Install Drain Hose Waste disposer with air gap Connect drain hoseWaste disposer no air gap No waste disposer no air gapPrepare Dishwasher Power Cord-Route cord into terminal box Make Power Supply Cord ConnectionPower Supply Cord- Connect ground wire Power Cord-Connect remaining wiresDetermine Cabinet Opening Move Dishwasher into Cabinet Opening Choose Attachment OptionOpen and close door Check water and drain hose positionDoor falls open- Increase spring tension Move dishwasher into cabinet openingConnect to Water Supply Slide clamp onto connector Make Direct Wire Electrical ConnectionDirect Wire-Route cable into terminal box Connect to DrainDirect Wire-Connect remaining wires Direct Wire-Connect ground wireDirect Wire-Secure cable in conduit connector Direct Wire-Reinstall terminal box coverSecure Dishwasher in Cabinet Opening Reinstall access panels Complete InstallationRemove towel and replace lower dishwasher rack Check lower panel edgeReconnect power Power supply cord-Plug into a grounded 3 prong outletCheck Operation If Dishwasher Does Not OperateTable des matières Instructions d’installation suiteProcessus à appliquer Préparation de la cavité dencastrementOutillage et pièces Exigences d’emplacementMinimum à l’endroit le plus étroit de la cavité Dimensions Produit et cavité d’encastrementEn gris sur les parois de la cavité d’encastrement Spécifications de l’alimentation en eau Spécifications de l’évacuationSpécifications électriques Utilisation d’un brise-videFermer l’arrivée d’eau Déconnecter la source de courant électriqueMoyens de raccordement aux divers circuits déjà existants? Quel type de raccordement électrique sera utilisé?Câblage direct Perçage du trou Cordon d’alimentation Préparation du trouCâblage direct Préparation du trou Câblage direct Acheminement du câbleInstallation de la canalisation dalimentation Installation du tuyau d’évacuationInstallation du tuyau d’évacuation Purge de la canalisation d’eauBroyeur à déchets pas de brise-vide Raccordement du tuyau d’évacuationBroyeur à déchets avec brise-vide Pas de broyeur à déchets pas de brise-videDépose des panneaux Préparation du lave-vaisselleAttachez l’isolation Raccordement électrique Cordon d’alimentation Installation du serre-câbleÔter le couvercle du boîtier De connexion électrique Cordon d’alimentation Conducteur de liaison à la terreConfiguration de câblage Dimensions de la cavité d’encastrementMesure des dimensions Tableau de réglage Hauteur du lave-vaisselleChoix de l’option de fixation Plier la languette montage latéral Déplacement du lave-vaisselle à proximité de louvertureRedresser le lave-vaisselle Manœuvre de la porteInsertion du lave-vaisselle dans la cavité d’encastrement La tension des ressortsContrôle de l’aplomb et réglage des pieds si nécessaire IsolantRaccordement à l’égout Raccordement à la canalisation d’eauRaccorder le raccord coudé de 90 à la valve Recherche de fuitesBride de tuyau position finale Raccordement électrique Câblage directCâblage direct Acheminement jusqu’au boîtier de connexion Câblage direct Raccordement des autres conducteursSerrer les vis du serre-câble pour immobiliser le câble Câblage direct Immobilisation dans le connecteur de conduitExtraction du panier inférieur utilisation d’une serviette Achever linstallation Serrage des vis Inspection de la rive de panneau inférieureReconnecter la source de courant électrique Reconnecter la source de courant électriqueSi le lave-vaisselle ne fonctionne pas Contrôle du fonctionnementConseils additionnels Heures

W10282553A specifications

The Maytag W10282553A is a refrigerator water filter that plays a crucial role in maintaining the quality and taste of drinking water. This filter is designed specifically for select Maytag refrigerators, ensuring a seamless fit and optimal performance. With a focus on reliability and efficiency, the W10282553A provides several key features and technologies that promote clean and refreshing water.

One of the standout characteristics of the W10282553A is its advanced filtration system. The filter is designed to reduce contaminants such as chlorine taste and odor, lead, mercury, and other impurities that can affect the quality of drinking water. This ensures that every glass of water not only tastes pure but is also safe for consumption.

The installation process of the Maytag W10282553A is user-friendly, allowing homeowners to easily replace the filter without needing professional assistance. The filter is designed to be a direct replacement for compatible models, making it a convenient and practical choice for maintaining optimal refrigerator performance.

Another notable aspect of the W10282553A is its long-lasting performance. The filter typically lasts for up to six months or 200 gallons, depending on usage and water quality. This longevity makes it a cost-effective solution for households looking to enjoy clean and filtered water without frequent replacements.

In addition to its filtration capabilities, the Maytag W10282553A is an environmentally friendly option. By choosing filtered water over bottled water, consumers can reduce plastic waste and contribute to a healthier planet. The filter's design helps minimize the environmental impact while ensuring high-quality water for everyday use.

Furthermore, Maytag is a trusted brand known for its commitment to quality and durability. The W10282553A reflects this reputation, representing reliability and performance that consumers can count on. Ensuring fresh water access is vital for hydration and health, making the Maytag W10282553A an essential component of any compatible refrigerator.

In conclusion, the Maytag W10282553A refrigerator water filter offers advanced filtration technology, ease of installation, long-lasting performance, and environmental benefits. With its focus on providing clean and refreshing water, this filter is an indispensable accessory for maintaining a healthy lifestyle and the overall functionality of Maytag refrigerators.
Top Page Image Contents