Maytag W10157789A Dishwasher Care, Lower Flexload Rack, Adjustable Racks upper and mid level

Page 8

Lower Flexload™ Rack

A variety of large items such as

casserole dishes, baking pans, mixing bowls, and pots and pans can be loaded in the lower

rack. When deeper dishes or pots and pans are located in this rack, the middle rack can

be raised. To accommodate exceptionally large, occasionally used items such as a canner on the lower Flexload™ rack, the middle rack can be removed. For good

wash action, place items with soiled surfaces face down in the rack.

Adjustable Racks (upper and mid level)

The Adjustable Upper Rack and Adjustable Middle Rack can be raised or lowered to accommodate taller plates, platters, pots or pans, in the upper, middle or lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position.

NOTE: Always unload racks before adjusting.

To raise the rack, press both rack adjusters and lift the rack until it is in the Up position and level.

To lower the rack, press both rack adjusters and slide the rack back to its lower position.

Removable Upper and Middle Racks

The removable racks allow you to wash larger items such as stock pots, roasters, and cookie sheets in the lower level rack.

IMPORTANT: Remove dishes prior to removing the middle rack from the dishwasher.

To remove the rack (push tab rack stop):

1.Roll the rack ¹⁄₃ to ¹⁄₂ of the way

out.

2. Remove each plastic push tab rack stop from the end of each track by pushing inward toward the rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Be sure to support the track while removing rack stops.

3.Roll the rack all the way out of the track and remove from the dishwasher.

To replace the rack:

Reverse the above steps 1-3 to replace the rack into the dishwasher.

To remove the racks (tab-lock rack stops)

1.Roll the rack ¹⁄₃ to ¹⁄₂ of the way out.

2.Locate the rack stops at the end of

each track. Squeeze the tab in the middle of the rack stop and pull the rack straight out. Be sure to support the rack while removing the rack stops.

3. Roll the rack all the way out of the track and remove from the dishwasher.

To Replace:

1.Replace the dishwasher rack by guiding the wheels into the tracks.

2.Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track.

Dishwasher Care

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended - Stainless Steel Cleaner and Polish Part Number 31464.

Clean the interior of the dishwasher, with a paste of powdered dishwasher detergent and water or use liquid dishwasher detergent on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe measuring cup on the bottom rack. Run the dishwasher through a complete washing cycle using an air-dry or an energy-saving dry option. Do not use detergent. Vinegar will mix with the wash water.

If you have a drain air gap, check and clean it if the dishwasher isn't draining well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. In the winter, if the dishwasher could be exposed to near freezing temperatures or is left in a seasonal dwelling such as a second home or vacation home, avoid water damage by having your dishwasher winterized by authorized service personnel.

8

Image 8
Contents Dishwasher Safety Dishwasher User InstructionsFor a grounded, cord-connected dishwasher For a permanently connected dishwasherQuick Steps Dishwasher UseAdd Rinse Aid Select a Cycle cycles vary by modelSelect Options options vary by model Start or Resume a CycleCycle and Option Descriptions Cycle Cycle + Options *Maximum MinimumControls Cycle Status Control Purpose Comments Dishwasher Features Adjustable Racks upper and mid level Dishwasher CareLower Flexload Rack Removable Upper and Middle RacksDishes do not dry completely TroubleshootingDishwasher is not operating properly Dishes are not completely clean Spots and stains on dishesNoises Dishes are damaged during a cycleLimited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesW10157789A SP PN W10157790A Instructions Dutilisation DU LAVE-VAISSELLE Sécurité du lave-vaissellePour un lave-vaisselle branché en permanence Pour un lave-vaisselle relié à la terre, branché avec unCordon Étapes rapides Utilisation du lave-vaissellePréparation et chargement du lave-vaisselle Chargement avec trois paniersVerser le détergent Verser l’agent de rinçageCommencer ou reprendre un programme Indiquées correspondent àDescription des programmes et des options Sélections DE ProgrammeTypes DE Charge DE Descriptions Durée DE Lavage Hhmm VaisselleDes Caractéristiques du lave-vaisselle Panier à ustensiles Split & FitPanier supplémentaire sur certains modèles Attaches fixesTiges pliables Tiges convertiblesPanier dempilage Stack-Rack Panier inférieur FlexloadEntretien du lave-vaisselle DépannageLe lave-vaisselle ne fonctionne pas correctement La vaisselle nest pas complètement sèchePrésence de taches sur la vaisselle BruitsLa vaisselle nest pas complètement nettoyée La vaisselle est endommagée au cours dun programmeLa présente garantie limitée ne couvre pas Garantie LimitéeArticles Exclus DE LA Garantie Tous droits réservés

W10157789A specifications

The Maytag W10157789A is a highly regarded appliance accessory designed to optimize the performance of your Maytag clothes dryer. This replacement lint filter is engineered to capture lint and debris from your garments, ensuring that your dryer operates efficiently and safely. By utilizing this component, you not only prolong the life of your dryer but also enhance the drying process, saving both time and energy.

One of the standout features of the W10157789A is its robust design. Constructed from high-quality materials, this lint filter is built to endure the conditions of everyday use while maintaining its functionality. The mesh screen effectively captures lint particles while allowing for optimal airflow, which is crucial for efficient drying. A well-functioning lint filter also helps to prevent potential fire hazards that can arise from accumulated lint in dryer vents.

In terms of technology, the W10157789A reflects advancements in home appliance design aimed at improving user experience and safety. Its easy-to-install design ensures that homeowners can replace the filter without needing specialized tools or assistance. This user-friendly approach resonates with Maytag’s commitment to customer satisfaction and ease of maintenance.

The lint filter also features a sleek and modern aesthetic, making it a practical addition to your dryer setup. Its compatibility with several Maytag dryer models broadens its appeal, allowing various users to benefit from its efficiency. Moreover, the filter is designed to be easily cleaned, promoting regular maintenance practices that keep your dryer functioning optimally and your laundry room safe.

An important attribute of the W10157789A is its contribution to energy efficiency. By effectively trapping lint, this filter ensures that your dryer doesn’t have to work harder than necessary, thereby conserving energy and reducing utility costs. It complements the eco-friendly features of many Maytag appliances, making it an ideal choice for environmentally conscious consumers.

In summary, the Maytag W10157789A is more than just a replacement part; it embodies a dedication to safety, efficiency, and user convenience. Whether you are a first-time homeowner or a seasoned appliance user, investing in this lint filter is a practical decision that pays dividends in dryer performance and longevity.