Maytag W10157789A warranty Controls Cycle Status Control Purpose Comments

OPTION SELECTIONS

OPTIONS	DISH LOAD TYPES	DESCRIPTIONS	USE WITH:
	For best drying results, dry	Turn OFF when loads contain plastic dinnerware that may be	Heavy Wash, Normal
	dishes with heat.	sensitive to high temperatures.	Wash, China/Crystal,
		This option with the use of rinse aid will provide the best	Insta Wash or Sensor
			Clean cycles
		drying performance.
	To sanitize your dishes and	Raises the water temperature in the final rinse to	Heavy Wash, Normal
	glassware in accordance	approximately 154°F (68°C). This high temperature rinse	Wash, Light Wash,
	with NSF/ANSI Standard	sanitizes your dishes and glassware in accordance with	China/Crystal or Sensor
	184 for Residential	NSF/ANSI Standard 184 for Residential Dishwashers.	Clean cycles
	Dishwashers.	Certified residential dishwashers are not intended for
		licensed food establishments.
		The Sanitize option adds heat and time to the cycle.
	Loads containing tough,	Increases the target water temperature during the wash	All cycles, except Rinse
	baked-on food.	portions of the cycle.	Only and Insta Wash
		Adds heat, wash time and water to the cycle.

Use for loads with tough food soil.

Depending on which cycle is being used, adds heat and/or	Heavy Wash or Normal
wash time to the cycle.	Wash

Use for loads with normal	Raises temperature in the final rinse to 160°F (71°C).	All cycles, except Quick
amounts of food soil.		Wash and Rinse Only

Use for loads with normal amounts of food soils; specialized option for stemware and glass cleaning.

Provides deep clean and shine by adding steam to the cycle. All cycles, except Rinse

Raises the water temperature in the final rinse to	Only and Insta Wash
approximately 154°F (68°C).

To run your dishwasher at a later time or during off- peak hours.

Delays the start of a cycle up to 9 hours.	All cycles, except Rinse
Select a wash cycle and options. Press Delay. Press Start/	Only
Cancel. Close the door firmly.

Control Lock To avoid unintended use of

your dishwasher, or cycle

and option changes during a cycle.

To turn on Lock, press and hold Heated Dry for at least	Anytime
3 seconds.
To turn off Lock, press and hold Heated Dry for at least
3 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the
controls are locked.

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.

CONTROLS AND

CYCLE STATUS

CONTROL PURPOSE COMMENTS

To start or resume a wash cycle

If the door is opened during a cycle or the power is interrupted, all lights will flash to indicate suspended cycle. The cycle will not resume until the door is closed.

To follow the progress and status of your dishwasher cycle

Clean indicator glows when a cycle is finished.

If you select the Sanitize option, when the Sanitize cycle is finished, the Sanitized indicator glows. If your dishwasher did not properly sanitize your dishes, the light will not come on. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The clean and sanitize lights go off when the door has been opened for more than 30 seconds or the CANCEL key is pressed.

6