Bunn LCA-2, LCC-2 manual Menu Screen Lock Flavor ? Exit YES Flavors Locked, LF Disp Volume, 0oz +

Page 13

MENU SCREEN

LOCK FLAVOR ? EXIT YES

FLAVORS LOCKED

EXIT

ACTION

DESCRIPTION

Select (YES) or (EXIT)

Select YES, to Lock In sensor calibration. NOTE:

 

Display will return to “Find LF Target” if sensor

 

calibration is out of range.

NONE

Confirms that sensor calibration was in range and

 

accepted. Scroll down to continue.

Portion Control Settings for Pull and Hold Dispensers

For Portion Control Dispensers (LCA-2 PC, LCA-2C PC, LCA-2A PC) go to Full Time Portion Control Settings

LF DISP VOLUME

(-) 4.0oz (+)

RT DISP VOLUME

(-) 4.0oz (+)

Use the (+) or (-) buttons to adjust the Left portion volume

Use the (+) or (-) buttons to adjust the Right portion volume

Set the volume to be dispensed during a Left Portion controlled dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the volume to be dispensed during a Right Portion controlled dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Full Time Portion Control Settings

LF DISP VOLUME 1

(-) 4.0oz (+)

LF DISP VOLUME 2

(-) 0.0oz (+)

RT DISP VOLUME 1

(-) 4.0oz (+)

RT DISP VOLUME 2

(-) 0.0oz (+)

WATER DISP VOL 1

(-) 0.0oz (+)

WATER DISP VOL 2

(-) 0.0oz (+)

Use the (+) or (-) buttons to adjust the Normal Left volume

Use the (+) or (-) buttons to adjust the Alternate Left volume

Use the (+) or (-) buttons to adjust the Normal Right volume

Use the (+) or (-) buttons to adjust the Alternate Right volume

Use the (+) or (-) buttons to adjust the Normal Hot Water volume

Use the (+) or (-) buttons to adjust the Alternate Hot Water volume

Set the desired portion control volume to be dispensed during a Normal Left dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Left dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Normal Right dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Right dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Normal Hot Water dispense: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Hot Water dispense: [0 - 640 Oz.] or [0 - 18.93L]

13

34766 120105

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Phone 217 529-6601 FAX 217 Post Office BOX SPRINGFIELD, IllinoisBUNN-O-MATIC Commercial Product Warranty ContentsUser Notices Introduction00656.0000 28181.0003Models without Master ON/OFF Switch Field Wiring Terminal Block DiagramModels with Master ON/OFF Switch Electrical RequirementsInitial SET-UP Plumbing RequirementsElectrical HOOK-UP Plumbing HOOK-UPRemoving the restrictors Setting Dispenser Flow RateReprogramming the Dispenser Flow Rate Dispense Selecting the Correct Pump TubingRate Oz/sec 16 I.D. Tubing1513 Operating Controls and InterfaceInitial Fill & Heat Rinse Alarm Feature FlavorGard FeatureAlarm Mode Brew Temperature Lockout Feature BIB Empty Lockout FeatureMenu Screen Action Description Tank Temp Programming the Dispenser351 + Exit 3/16RT Disp Volume LF Disp VolumeMenu Screen Lock Flavor ? Exit YES Flavors Locked 0oz +Exit + Menu Screen Tank TempReady Temp Cabinet TempRinse Lockout ? No Exit YES Menu ScreenBrew Lockout ? No Exit YES Action DescriptionCAL Right Pump ? Pull Dispenser Menu Screen ActionCAL RT WTR Flow Pull Dispenser CAL Right Side ? Exit YESWTR Stop Delay WTR Start DelayTest LED’S ? No Exit YES Test Switches ? Factory Defaults No YES Action DescriptionPriming the Concentrate Lines Loading the ConcentrateFilling Cambros or other large containers Operating the Pull & Hold DispenserModels LCA-2 PC, LCA-2C PC, LCA-2A PC Operating the Preset Portion Control DispenserGeneral Cleaning and Sanitizing Procedures Daily Rinsing Cleaning & Preventative MaintenanceDaily Parts Washing Weekly SanitizingReplacing the Pump Tubing Draining the HOT Water Tank Power LED OFF TroubleshootingFront Panel LED Display Messages Left Refill LED on Internal FaultConcentrate BIB is Empty Empty BIB WarningBIB Not properly connected Check BIB Connector Fittings Troubleshooting Dispenser Diagnostics-LCD DisplayTubing kinked or blocked Check Tubing installation Possible CauseScreen Displayed Possible Cause Motor failure Service Required Evaporator temperature too high Service RequiredRPM Sensor failure Service Required Cabinet circulating fan failure Service RequiredCalibrating the Left Side Dispenser Oz/sec 53 ml/sec w/ flow restrictor Field Calibrating the Hot Water Flow RateOz/sec 74 ml/sec w/o flow restrictor Calibrating the Right Side DispenserCalibrating The Empty BIB Threshold Field Calibrating the Empty BIB WarningLCA-2/LCA-2, PC/LCA-2C/LCA-2C, PC/LCC-2/LCC-2C Schematic Wiring Diagram Schematic Wiring Diagram LCC-2A/LCA-2A/LCA-2A, PC
Related manuals
Manual 36 pages 62.09 Kb Manual 26 pages 22.61 Kb

LCA-2 PC, LCA-2, LCC-2 specifications

The Bunn LCC-2, LCA-2 PC, and LCA-2A are high-performance commercial coffee brewers designed to meet the demands of busy coffee shops, restaurants, and other food service establishments. These machines are known for their efficiency, durability, and advanced brewing technologies, making them popular choices in the industry.

Starting with the Bunn LCC-2, this brewer is recognized for its compact design and ease of use. It has a brewing capacity of up to 3.8 gallons per hour, ensuring that coffee is ready quickly during peak hours. The LCC-2 uses a pour-over brewing method, which means that water is heated to the ideal brewing temperature and then poured over coffee grounds for optimal extraction. One of its standout features is the digital temperature control, which allows operators to adjust brewing temperatures easily for different coffee types. Additionally, the Bunn LCC-2 features a stainless steel construction that enhances durability and provides a sleek look for any commercial kitchen.

Moving on to the Bunn LCA-2 PC, this model includes programmable capabilities, making it perfect for establishments that require consistency and convenience. The LCA-2 PC allows users to preset brewing schedules and customize brew cycles, ensuring that each pot of coffee meets specific flavor profiles. This model is designed with a large-capacity brewing system that can produce up to 7.5 gallons of coffee per hour, making it an ideal choice for high-demand environments. It also boasts a built-in hot water faucet, which provides instant hot water for other beverages or culinary applications. The LCA-2 PC's advanced brewing automation helps maintain optimal brew quality while minimizing waste.

Lastly, the Bunn LCA-2A is an advanced version that focuses on automation and efficiency. This brewer features a state-of-the-art digital brew timer, which allows precise control over brew times, leading to consistent flavor extraction. The LCA-2A also integrates with Bunn’s patented brewWISE technology, which tracks brew recipes and monitors performance. The intuitive interface allows for easy operation, even for staff who may be less experienced with coffee brewing. With a capacity of up to 4 gallons per hour and a durable stainless steel frame, the LCA-2A ensures longevity while delivering exceptional coffee.

In summary, the Bunn LCC-2, LCA-2 PC, and LCA-2A represent the pinnacle of commercial coffee brewing technology. Their unique features, including programmable settings, large brewing capacities, and durable constructions, cater to the diverse needs of the food service industry. Each model emphasizes convenience, flexibility, and quality, making them invaluable assets in any professional coffee environment.
Top Page Image Contents