Bunn FCD-4 manual Mix Ratio, Product Brix %, Pump Speed Programming

Page 15

ADJUSTMENT & OPTIONAL SETTINGS (cont)

 

Water Flow Testing and Adjustment

 

1.

Enter the “Pump Speed Programming” mode by simultaneously press-

 

 

ing both “Hidden Switches” Fig 5 or Fig 6. Note that the beeper sounds

 

 

twice and that the “PROGRAM” indicator begins flashing.

 

2.

Place a graduated measuring cup or the large chamber of the empty

 

 

brixing cup (BUNN-O-MATIC part number 33095.0000) under the

 

 

appropriate dispense nozzle.

 

3.

Press and hold the desired “Product Dispense Switch” Fig 5 (“+/Stop

P2253.70

 

Switch” Fig 6, for portion control dispensers) for 5 seconds. Note that

FIG 8 Adjusting Water Flow

 

the beeper sounds once per second (6 times, total) during this period.

 

4.At the end of the 5 second period, the selected position will dispense water (no concentrate) for only 3 seconds.

5.Measure the water dispensed.

6.Adjust the water flow rate Fig 8, (clockwise to increase flow rate; counterclockwise to decrease flow rate) to the corresponding product mix ratio as follows:

Mix Ratio

Adjust water flow rate to:

Product

Brix %

(water + concentrate)

 

 

 

2+1

3.75 fluid ounces (111 ml)

Prune Juice

16.0%

 

per 3-second test

Other

*

4+1

 

Orange Juice

11.8%

 

Pineapple Juice

12.8%

 

4.5 fluid ounces (133 ml)

Cranberry Fruit Cocktail

14.0%

 

Grapefruit Juice

10.6%

 

5+1

per 3-second test

Lemonade

 

 

Apple Juice

12.0%

 

 

Fruit Punch

 

 

 

Grape Juice

13.0%

3+1 through 7+1

 

Other

*

Above 7+1

6.0 fluid ounces (177 ml)

Other

*

 

per 3-second test

 

 

Note: Information for specific products listed in this table is to be used for reference only. Consult the product label for exact mix ratio and/or brix %. See product label for target brix %.

7.Repeat steps 3 through 6 as necessary until the correct water flow rate is achieved.

8.Repeat steps 3 through 7 for the remaining dispense positions.

9.Exit the “Pump Speed Programming” mode by simultaneously pressing both “Hidden Switches”. Note that the beeper sounds twice and the “PROGRAM” indicator extinguishes.

Pump Speed Programming

1.Enter the “Pump Speed Programming” mode by simultaneously pressing both “Hidden Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator begins flashing.

2.To increase the pump speed, press and hold the right-hand “Hidden Switch” (filled circle) and then momentarily press the “Product Dispense Switch” Fig 5 (“+/STOP Switch” Fig 6, for portion control dispensers). Each time the “Product Dispense Switch “(+/STOP Switch”) is pressed, the motor speed is increased by one step (5 revolutions per minute [RPM].) Note that each step is confirmed by a single flash of the appropriate “REFILL” indicator and a single tone from the beeper.

3.To decrease the pump speed, press and hold the left-hand “Hidden Switch” (half-filled circle) and then momentarily press the “Product Dispense Switch (“+/STOP Switch” for portion control dispensers). Each time the “Product Dispense” (“+/STOP”) Switch is pressed, the motor speed is decreased by one step (5 RPM.) Note

15

33496 011101

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Phone 217 529-6601 FAX 217 Post Office BOX SPRINGFIELD, IllinoisWarranty ContentsCharge User NoticesInitial SET-UP Electrical RequirementsElectrical HOOK-UP Plumbing Hookup Plumbing RequirementsWater Bath and Main Water Valves Refrigeration SwitchSanitize Switch Operating ControlsOperating Controls Initial Fill LoadingFrozen Concentrates Priming Initial Fill Ambient Concentrates OptionalDispenser USE Press and Hold Models Refer to FigPortion Control Models Refer to Fig Cleaning & Preventive Maintenance Daily Parts WashingWeekly Sanitizing Cleaning Annually Replace Pump Tubing Cleaning Monthly Clean Condenser Air FilterRatio Cup Method Adjustment & Optional SettingsSetting the MIX RATIO/BRIX Temperature Compensated Refractometer MethodMix Ratio Product Brix %Pump Speed Programming Dispenser Lockout Adjustment & Optional SettingsChilled Water Flow Testing and Adjustment Cup Size Programming Portion Control Dispensers OnlyService Lockout Adjustment & Optional Settings Password Protection Cooling Coolant Schematic Diagram Schematic Wiring Diagram

FCD-4 specifications

The Bunn FCD-4 is a commercial coffee dispenser designed to meet the demands of busy environments such as cafes, restaurants, and catering businesses. Known for its durability and performance, the FCD-4 has become a popular choice among coffee service operators.

One of the main features of the Bunn FCD-4 is its ability to hold and dispense up to four different flavors of coffee, allowing businesses to cater to diverse customer preferences. This multifunctionality is critical in settings where customers appreciate variety. With its 4.0-gallon capacity, the FCD-4 is engineered to handle high-volume service while maintaining consistent temperature and fresh taste.

The FCD-4 utilizes Bunn's well-known brewing technology. It is designed with an innovative brew sequence that optimizes coffee extraction, ensuring rich flavor profiles and maximum aroma retention. This technology, coupled with its ability to brew directly into multiple containers, provides operators with versatility and efficiency in serving coffee.

Another characteristic of the FCD-4 is its easy-to-read digital display that shows the current status of the coffee dispenser, including brew levels and operational readiness. This feature enables staff to monitor the workflow seamlessly, reducing wait times for customers.

The Bunn FCD-4 also stands out because of its user-friendly design. It includes ergonomic controls for straightforward operation, making it accessible to users with varying degrees of experience. Moreover, it is equipped with a self-cleaning function that simplifies maintenance, ensuring that the dispenser remains hygienic and operational with minimal downtime.

Durability is a hallmark of Bunn products, and the FCD-4 is no exception. Constructed with high-quality stainless steel, it is built to withstand the rigors of daily use in high-demand environments. The design also includes safety features such as automatic shut-off and temperature controls to prevent overheating, enhancing user safety.

In summary, the Bunn FCD-4 is a versatile and robust coffee dispenser that caters to the needs of commercial environments. Its capacity to hold multiple coffee flavors, advanced brewing technology, user-friendly controls, and durable construction make it a top choice for businesses aiming to deliver high-quality coffee consistently. Whether serving coffee at a busy café or during a large event, the Bunn FCD-4 is designed to enhance the coffee-serving experience.
Top Page Image Contents