Bunn FCD-4 manual Adjustment & Optional Settings, Chilled Water Flow Testing and Adjustment

Page 16
FIG 9 Chilled Water Flow Valve

ADJUSTMENT & OPTIONAL SETTINGS (cont)

that each step is confirmed by a single flash of the appropriate “REFILL” indicator and a single tone from the beeper.

4.Repeat as necessary at the remaining dispense stations.

5.Exit the “Pump Speed Programming” mode by simultaneously pressing both “Hidden Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator extinguishes.

Chilled Water Flow Testing and Adjustment

1.Enter the “Pump Speed Programming” mode by simultaneously pressing both “Hidden Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator begins flashing.

2.Place a graduated measuring cup or the large chamber of the empty brixing cup (BUNN-O-MATIC part number 33095.0000) under the appropriate dispense nozzle.

3.Press and hold the “Chilled Water Switch” Fig 5 or Fig 6, for 5 seconds. Note that the beeper sounds once per second (6 times, total) during this period.

4.At the end of the 5 second period, the chilled water will dispense for 3 seconds.

5.Measure the water dispensed. (Approx. 4.5 fl. oz. [133 ml])

6.If adjustment is required, remove all concentrate bottles from dispenser and disconnect any optional ambient concentrate hoses. Remove product shelf from dispenser.

7.Adjust the Chilled Water Flow Valve Fig 9, clockwise to decrease flow rate; counterclockwise to increase flow rate.

8.Repeat steps 3 through 6 as necessary until the desired water flow rate is achieved.

9.Exit the “Pump Speed Programming” mode by simultaneously

pressing both “Hidden Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator extinguishes.

Cup Size Programming (Portion Control Dispensers Only)

P2263

1.Enter the “Cup Size Programming” mode by simultaneously pressing the “LARGE” and “SMALL” cup size switches at any dispense station. Note that the beeper sounds twice and that the “PROGRAM” indicator lights steadily.

2.Press and hold the desired cup size switch at the appropriate dispense position until the correct cup volume is achieved. Top up as necessary by momentarily pressing the same cup size switch. Note that if DIP switch #2 on the control board is set to the “on” position, concentrate must be present in order to dispense or program cup sizes.

3.Repeat as necessary for the remaining cup sizes and dispense stations.

4.Exit the “Pump Speed Programming” mode by pressing any of the “+/STOP Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator extinguishes.

Dispenser Lockout

Dispense and Rinse functions of the dispenser can be electronically locked-out to prevent unauthorized use of the dispenser, while keeping the refrigeration system running.

1.Enter the “Pump Speed Programming” mode by simultaneously pressing both “Hidden Switches”. Note that the beeper sounds twice and that the “PROGRAM” indicator begins flashing.

2.Enter a “Lockout” password as follows:

a)Press and hold either “Hidden Switch”.

16

33496 011101

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Post Office BOX SPRINGFIELD, Illinois Phone 217 529-6601 FAX 217Contents WarrantyUser Notices ChargeElectrical Requirements Initial SET-UPElectrical HOOK-UP Plumbing Requirements Plumbing HookupRefrigeration Switch Sanitize SwitchOperating Controls Water Bath and Main Water ValvesOperating Controls Loading Initial FillFrozen Concentrates Initial Fill Ambient Concentrates Optional PrimingPress and Hold Models Refer to Fig Dispenser USEPortion Control Models Refer to Fig Daily Parts Washing Cleaning & Preventive MaintenanceWeekly Sanitizing Cleaning Cleaning Monthly Clean Condenser Air Filter Annually Replace Pump TubingAdjustment & Optional Settings Setting the MIX RATIO/BRIXTemperature Compensated Refractometer Method Ratio Cup MethodProduct Brix % Mix RatioPump Speed Programming Adjustment & Optional Settings Chilled Water Flow Testing and AdjustmentCup Size Programming Portion Control Dispensers Only Dispenser LockoutService Lockout Adjustment & Optional Settings Password Protection Cooling Coolant Schematic Diagram Schematic Wiring Diagram

FCD-4 specifications

The Bunn FCD-4 is a commercial coffee dispenser designed to meet the demands of busy environments such as cafes, restaurants, and catering businesses. Known for its durability and performance, the FCD-4 has become a popular choice among coffee service operators.

One of the main features of the Bunn FCD-4 is its ability to hold and dispense up to four different flavors of coffee, allowing businesses to cater to diverse customer preferences. This multifunctionality is critical in settings where customers appreciate variety. With its 4.0-gallon capacity, the FCD-4 is engineered to handle high-volume service while maintaining consistent temperature and fresh taste.

The FCD-4 utilizes Bunn's well-known brewing technology. It is designed with an innovative brew sequence that optimizes coffee extraction, ensuring rich flavor profiles and maximum aroma retention. This technology, coupled with its ability to brew directly into multiple containers, provides operators with versatility and efficiency in serving coffee.

Another characteristic of the FCD-4 is its easy-to-read digital display that shows the current status of the coffee dispenser, including brew levels and operational readiness. This feature enables staff to monitor the workflow seamlessly, reducing wait times for customers.

The Bunn FCD-4 also stands out because of its user-friendly design. It includes ergonomic controls for straightforward operation, making it accessible to users with varying degrees of experience. Moreover, it is equipped with a self-cleaning function that simplifies maintenance, ensuring that the dispenser remains hygienic and operational with minimal downtime.

Durability is a hallmark of Bunn products, and the FCD-4 is no exception. Constructed with high-quality stainless steel, it is built to withstand the rigors of daily use in high-demand environments. The design also includes safety features such as automatic shut-off and temperature controls to prevent overheating, enhancing user safety.

In summary, the Bunn FCD-4 is a versatile and robust coffee dispenser that caters to the needs of commercial environments. Its capacity to hold multiple coffee flavors, advanced brewing technology, user-friendly controls, and durable construction make it a top choice for businesses aiming to deliver high-quality coffee consistently. Whether serving coffee at a busy café or during a large event, the Bunn FCD-4 is designed to enhance the coffee-serving experience.
Top Page Image Contents