Bunn LCC-2, LCA-2A manual Menu Screen Lock Flavor ? Exit YES Flavors Locked, LF Disp Volume, 0oz +

Page 15

MENU SCREEN

LOCK FLAVOR ? EXIT YES

FLAVORS LOCKED

EXIT

ACTION

DESCRIPTION

Select (YES) or (EXIT)

Select YES, to Lock In sensor calibration. NOTE:

 

Display will return to “Find LF Target” if sensor

 

calibration is out of range.

NONE

Confirms that sensor calibration was in range and

 

accepted. Scroll down to continue.

Portion Control Settings for Pull and Hold Dispensers

For Portion Control Dispensers (LCA-2 PC, LCA-2C PC, LCA-2A PC) go to Full Time Portion Control Settings

LF DISP VOLUME

(-) 4.0oz (+)

RT DISP VOLUME

(-) 4.0oz (+)

Use the (+) or (-) buttons to adjust the Left portion volume

Use the (+) or (-) buttons to adjust the Right portion volume

Set the volume to be dispensed during a Left Portion controlled dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the volume to be dispensed during a Right Portion controlled dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Full Time Portion Control Settings

LF DISP VOLUME 1

(-) 4.0oz (+)

LF DISP VOLUME 2

(-) 0.0oz (+)

RT DISP VOLUME 1

(-) 4.0oz (+)

RT DISP VOLUME 2

(-) 0.0oz (+)

WATER DISP VOL 1

(-) 0.0oz (+)

WATER DISP VOL 2

(-) 0.0oz (+)

Use the (+) or (-) buttons to adjust the Normal Left volume

Use the (+) or (-) buttons to adjust the Alternate Left volume

Use the (+) or (-) buttons to adjust the Normal Right volume

Use the (+) or (-) buttons to adjust the Alternate Right volume

Use the (+) or (-) buttons to adjust the Normal Hot Water volume

Use the (+) or (-) buttons to adjust the Alternate Hot Water volume

Set the desired portion control volume to be dispensed during a Normal Left dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Left dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Normal Right dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Right dispense to: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Normal Hot Water dispense: [0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be dispensed during a Alternate Hot Water dispense: [0 - 640 Oz.] or [0 - 18.93L]

15

34766.1 010313

 

Image 15
Contents Phone 217 529-6601 FAX 217 LCA-2 LCA-2A LCA-2 PC LCC-2BUNN-O-MATIC Commercial Product Warranty Introduction Contents40054.0000 00824.0002 47624.0000 User Notices00656.0001 37881.0000 28181.0003 11646.0002Electrical Requirements Field Wiring Terminal Block DiagramModels without Master ON/OFF Switch Models with Master ON/OFF SwitchPlumbing Requirements Electrical HOOK-UPPlumbing HOOK-UP Initial SET-UP Installing the Drip Tray and Flip Down CUP Tray1513 Operating Controls and InterfaceOz/sec 16 I.D. Tubing Selecting the Correct Pump TubingDispense RateSetting Dispenser Flow Rate Removing the restrictorsReprogramming the Dispenser Flow Rate Procedure for Adjusting the Mix Ratio to Taste Adjusting MIX RatiosFlavorGard Feature Rinse Alarm FeatureAlarm Mode Brew Temperature Lockout Feature BIB Empty Lockout FeatureExit 3/16 Programming the DispenserMenu Screen Action Description Tank Temp 351 +0oz + LF Disp VolumeRT Disp Volume Menu Screen Lock Flavor ? Exit YES Flavors LockedCabinet Temp Menu Screen Tank TempExit + Ready TempCAL Left Pump ? Pull Dispense Menu ScreenRinse Time ? 12 Hrs + Action DescriptionCAL Right Side ? Exit YES Menu Screen ActionCAL Right Pump ? Pull Dispenser CAL RT WTR Flow Pull DispenserTest Refill ? Exit YES WTR Start DelayWTR Stop Delay Test LED’S ? No Exit YES Test Switches ?Initial Fill & Heat Priming the Concentrate Lines Loading the ConcentrateFilling Cambros or other large containers Operating the Pull & Hold DispenserModels LCA-2 PC, LCA-2C PC, LCA-2A PC Operating the Preset Portion Control DispenserWeekly Sanitizing Cleaning & Preventative MaintenanceGeneral Cleaning and Sanitizing Procedures Daily Rinsing Daily Parts WashingReplacing the Pump Tubing Preventive MaintenanceDraining the HOT Water Tank Troubleshooting Power LED OFFFront Panel LED Display Messages Left Refill LED on Internal FaultPossible Cause Troubleshooting Dispenser Diagnostics-LCD DisplayBIB Not properly connected Check BIB Connector Fittings Tubing kinked or blocked Check Tubing installationScreen Displayed Possible Cause Wiring failure Corresponding Temperature SensorEvaporator temperature too high Air intake filter clogged Clean Air FilterCalibrating the Left Side Dispenser Calibrating the Right Side Dispenser Field Calibrating the Hot Water Flow RateOz/sec 53 ml/sec w/ flow restrictor Oz/sec 74 ml/sec w/o flow restrictorCalibrating The Empty BIB Threshold Field Calibrating the Empty BIB WarningLCA-2/LCA-2, PC/LCA-2C/LCA-2C, PC/LCC-2/LCC-2C Schematic Wiring DiagramSchematic Wiring Diagram LCC-2A/LCA-2A/LCA-2A, PC
Related manuals
Manual 34 pages 56.59 Kb Manual 26 pages 22.61 Kb

LCA-2 PC, LCA-2A, LCC-2 specifications

The Bunn LCC-2, LCA-2 PC, and LCA-2A are high-performance commercial coffee brewers designed to meet the demands of busy coffee shops, restaurants, and other food service establishments. These machines are known for their efficiency, durability, and advanced brewing technologies, making them popular choices in the industry.

Starting with the Bunn LCC-2, this brewer is recognized for its compact design and ease of use. It has a brewing capacity of up to 3.8 gallons per hour, ensuring that coffee is ready quickly during peak hours. The LCC-2 uses a pour-over brewing method, which means that water is heated to the ideal brewing temperature and then poured over coffee grounds for optimal extraction. One of its standout features is the digital temperature control, which allows operators to adjust brewing temperatures easily for different coffee types. Additionally, the Bunn LCC-2 features a stainless steel construction that enhances durability and provides a sleek look for any commercial kitchen.

Moving on to the Bunn LCA-2 PC, this model includes programmable capabilities, making it perfect for establishments that require consistency and convenience. The LCA-2 PC allows users to preset brewing schedules and customize brew cycles, ensuring that each pot of coffee meets specific flavor profiles. This model is designed with a large-capacity brewing system that can produce up to 7.5 gallons of coffee per hour, making it an ideal choice for high-demand environments. It also boasts a built-in hot water faucet, which provides instant hot water for other beverages or culinary applications. The LCA-2 PC's advanced brewing automation helps maintain optimal brew quality while minimizing waste.

Lastly, the Bunn LCA-2A is an advanced version that focuses on automation and efficiency. This brewer features a state-of-the-art digital brew timer, which allows precise control over brew times, leading to consistent flavor extraction. The LCA-2A also integrates with Bunn’s patented brewWISE technology, which tracks brew recipes and monitors performance. The intuitive interface allows for easy operation, even for staff who may be less experienced with coffee brewing. With a capacity of up to 4 gallons per hour and a durable stainless steel frame, the LCA-2A ensures longevity while delivering exceptional coffee.

In summary, the Bunn LCC-2, LCA-2 PC, and LCA-2A represent the pinnacle of commercial coffee brewing technology. Their unique features, including programmable settings, large brewing capacities, and durable constructions, cater to the diverse needs of the food service industry. Each model emphasizes convenience, flexibility, and quality, making them invaluable assets in any professional coffee environment.