Extron electronic RGB 201 Rxi manual Rack mounting

Page 22

Installation and Operation, cont’d

Use 2 mounting holes on opposite corners

False Front panel uses 2 front holes

LEVEL
	PEAK
BOOST		CENTERING
	CONTROL	CENTERING
	CONTROL

RGB201Rxi

WITH

ADSPTM

(2) 4-40 x 3/16" Screws

Figure 2-5 — Rack mounting

3. Secure the interface to the rack shelf with the two provided 4-40 x 1/8" machine screws. Insert the screws from the underside of the shelf, and securely fasten them through diagonally opposite corners as shown in the illustration above.

4. Fasten the false front panel (provided with the rack shelf) to the unoccupied side of the rack (as shown above), or install a second half-rack-width device in that side by repeating steps 1 through 3.

5. Secure the rack shelf to the rack using four 10-32 x 3/4" bolts. Insert the bolts through #10 beveled washers, then through the holes in the rack ears.

2-10 RGB 201 Rxi Universal Interface • Installation and Operation

Image 22

Contents RGB 201 Rxi Universal Video Interface with AudioPrecautions 安全须知中文 FCC Class a NoticePage Quick Start Guide RGB 201 Rxi RGB 201 Rxi Universal Interface Quick Start GuideRemote control. See Switch PositionConnect an RS-232 device To this connector for For details about SIS Commands and the controlTable of Contents Table of Contents, cont’d One About the RGB 201 Rxi Introductionduction,cont’d About this ManualRGB 201 Rxi Universal Interface Introduction Features RGB 201 R xi Universal Interface IntroductionIntroduction, cont’d Two Instaltal lationandandOperation,cont’d Installation Overview RGB 201 Rxi Universal Interface Installation and OperationInternal Configuration RGB 201 Rxi Universal Interface Installation and OperationInstallation and Operation, cont’d Sync polarity jumpersRGB 201 R xi Universal Interface Installation and Operation Internal sync DIP switches RsGsBsVideo clamping jumper Tabletop placement Installation and Operation, cont’d Mounting the InterfaceUnder-desk mounting Through-desk mounting Through-desk mountingInstallation and Operation, cont’d Rack mounting Rack mounting procedureUL guidelines for rack mounting Rack mounting Rear Panel Connections and Switches Pin HD female connectorAudio output connector Connect an audio Connect the cables to five BNCsDdsp Spare Remote connector pinout Front panel controls and indicators Centering controls Many projectors store centering information in their ownLCD screen backlight Centering memoryLCD display Scan rate indicationIf the image does not appear or there is no sound TroubleshootingIf the image is not displayed correctly If the interface does not respond to controls If the image is not correctly centeredThree Simple Instruction Set Control RGB 201 Rxi Universal Interface Remote ControlRemoteControl,cont’d Host-to-interface communicationsUsing the command/response table Error responsesTimeout Symbol definitionsCommand/response table for SIS commands RemoteRGB 201 R xi Universal Interface Remote Control Installing the softwareUsing the software Control Software for WindowsRemote Control, cont’d Using the help systemAAppendix Video input ReferencerenceInformation,cont’d SpecificationsVideo Video outputAudio output AudioAudio input Control/remote interfaceGeneral Reference Information, cont’dIncluded Parts Included Parts Part numberCables Optional AccessoriesAccessories Part number Adapter cables with Audio Part numberBNC cables Part number Extron’s Warranty USA, Canada, South America Japan Central AmericaExtron Electronics. All rights reserved