Bunn 34766.0000S Menu Screen Action, CAL Right Pump ? Pull Dispenser, CAL Right Side ? Exit YES

Page 17

MENU SCREEN

ACTION

DESCRIPTION

If NO - skip to next menu.

CAL RIGHT PUMP ?

PULL DISPENSER

CAL RT PUMP VOL (-) 43mL (+)

CAL RT WTR FLOW

PULL DISPENSER

CAL RT WTR VOL (-) 36.0OZ (+)

CAL RIGHT SIDE ? EXIT YES

Place a 50 mL (#34843.1000) graduated cylinder under the Right dispense tip, then activate the Right Dispenser

Use the (+) or (-) buttons to enter volume collected

Place a 64 Oz. (2000 mL) container under the Right dispense tip, then activate the Right Dispenser

Use the (+) or (-) buttons to enter volume collected

NONE

The Right Pump will dispense concentrate for 20 seconds, then shut off automatically. Collect and measure the concentrate dispensed.

Enter the volume of concentrate measured from the Right Pump in mL(not Oz.) regardless of Preferred Units selected.

The Right Dispenser will dispense hot water for 20 seconds, then shut off automatically. Collect and measure the water dispensed.

Enter the volume of the water measured from the Right dispenser in Oz. (mL)

Scroll down to bypass this screen.

For Portion Control Dispensers (LCA-2 PC, LCA-2C PC, LCA-2A PC) only

CAL HOT WTR FLO ?

PULL DISPENSE

CAL HOT WTR VOL (-) 34.0OZ (+)

XXXCAL -> XXX (-) TankTemp (+)

FlvrGrdRange 10%

(-) EXIT (+)

LfFlvrGrdTargets

RPM XXX-CON XXX

RtFlvrGrdTargets

RPM XXX-CON XXX

Place a 64 Oz. (2000 mL) container under the Hot Water dispense tip, then activate the Hot Water Dispenser

Use the (+) or (-) buttons to enter volume collected

Use the (+) or (-) buttons to adjust temperature reading

Use the (+) or (-) buttons to adjust % value

NONE

NONE

The Hot Water Dispenser will dispense for 20 seconds, then shut off automatically. Collect and measure the water dispensed.

Enter the volume of the water measured from the Hot Water Dispenser in Oz. (mL)

Adjust the display reading to match a calibrated probe inserted next to the Tank Sensor, °F (°C).

Used to set the maximum adjustment the Flavor Guard feature is allowed to make, [3 - 15%].

Displays the Left Dispenser target RPM and Conductance Reading, (Diagnostics Only)

Displays the Right Dispenser target RPM and Conductance Reading, (Diagnostics Only)

17

34766 120105

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Phone 217 529-6601 FAX 217 Post Office BOX SPRINGFIELD, IllinoisBUNN-O-MATIC Commercial Product Warranty Introduction Contents00656.0001 User Notices37881.0000 28181.0003 11646.0002 40054.0000Models without Master ON/OFF Switch Field Wiring Terminal Block DiagramModels with Master ON/OFF Switch Electrical RequirementsInitial SET-UP Plumbing RequirementsElectrical HOOK-UP Plumbing HOOK-UPReprogramming the Dispenser Flow Rate Setting Dispenser Flow RateRemoving the restrictors Dispense Selecting the Correct Pump TubingRate Oz/sec 16 I.D. Tubing1513 Operating Controls and InterfaceInitial Fill & Heat Alarm Mode FlavorGard FeatureRinse Alarm Feature Brew Temperature Lockout Feature BIB Empty Lockout FeatureMenu Screen Action Description Tank Temp Programming the Dispenser351 + Exit 3/16RT Disp Volume LF Disp VolumeMenu Screen Lock Flavor ? Exit YES Flavors Locked 0oz +Exit + Menu Screen Tank TempReady Temp Cabinet TempRinse Time ? 12 Hrs + Menu ScreenAction Description CAL Left Pump ? Pull DispenseCAL Right Pump ? Pull Dispenser Menu Screen ActionCAL RT WTR Flow Pull Dispenser CAL Right Side ? Exit YESWTR Stop Delay WTR Start DelayTest LED’S ? No Exit YES Test Switches ? Test Refill ? Exit YESPriming the Concentrate Lines Loading the ConcentrateFilling Cambros or other large containers Operating the Pull & Hold DispenserModels LCA-2 PC, LCA-2C PC, LCA-2A PC Operating the Preset Portion Control DispenserGeneral Cleaning and Sanitizing Procedures Daily Rinsing Cleaning & Preventative MaintenanceDaily Parts Washing Weekly SanitizingReplacing the Pump Tubing Preventive MaintenanceDraining the HOT Water Tank Front Panel LED Display Messages TroubleshootingPower LED OFF Left Refill LED on Internal FaultConcentrate BIB is Empty Empty BIB WarningPossible Cause Troubleshooting Dispenser Diagnostics-LCD DisplayScreen Displayed Possible Cause CHK Pump Wiring Left Pump FaultCHK RPM Sensor CHK Tubing Area RT Pump Fault CHK RPM Sensor CHK Tubing Area Cooler FaultCalibrating the Left Side Dispenser Oz/sec 53 ml/sec w/ flow restrictor Field Calibrating the Hot Water Flow RateOz/sec 74 ml/sec w/o flow restrictor Calibrating the Right Side DispenserCalibrating The Empty BIB Threshold Field Calibrating the Empty BIB WarningVolts AC 2 Wire Schematic Wiring Diagram LCC-2A/LCA-2A/LCA-2A, PC

34766.0000S specifications

The Bunn 34766.0000S is a commercial-grade coffee maker that stands out for its efficiency and precision in brewing. Designed for high-volume environments such as restaurants, cafes, and offices, this coffee brewer is engineered to deliver a consistent and robust coffee flavor with every brew.

At the heart of the Bunn 34766.0000S is its unique brewing system, which employs a patented technology to optimize extraction. This system ensures that water is heated to the ideal temperature, usually around 200°F, for optimal flavor extraction from coffee grounds. The precise temperature control is essential in commercial settings, where the quality of coffee can significantly affect customer satisfaction.

The Bunn 34766.0000S features a stainless steel construction, which not only enhances its durability but also allows for easy cleaning and maintenance. The sleek design fits comfortably in any kitchen setting, and its compact size makes it suitable for countertops with limited space. With a 12-cup capacity, this machine is capable of producing multiple pots of coffee quickly, ensuring that demand is met during peak hours.

One of the standout features of the Bunn 34766.0000S is its Smart Brew technology. This innovative feature allows for customizable brewing settings, enabling users to adjust brew strength and flavor profiles according to their specific preferences. The machine includes a programmable timer, which can be set for automatic brewing, a significant advantage for businesses that require coffee to be ready at specific times.

Additionally, the Bunn 34766.0000S comes equipped with a built-in water tank, which keeps water at the optimal brewing temperature for instant coffee production. This feature minimizes waiting times and ensures that coffee is always fresh.

In terms of safety, the Bunn 34766.0000S is fitted with an advanced safety shut-off mechanism to prevent overheating and ensure that the machine operates within safe temperature limits. This reliability is crucial for busy establishments where operational efficiency is paramount.

In summary, the Bunn 34766.0000S is an exceptional choice for businesses looking for a dependable, high-quality coffee brewing solution. It combines innovative brewing technologies, user-friendly features, and a robust design to meet the demands of any commercial environment, making it an indispensable tool for serving delicious coffee consistently.
Top Page Image Contents