Panasonic KX-TG9361BX operating instructions Error messages, Display message Cause/solution

TG9361BX(e)_OI.book Page 32 Wednesday, April 16, 2008 3:08 PM

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	L The called handset is in use.
or	L Other units are in use and the system is busy.
	Try again later.
System is busy. Please	L The handset you are using is too far from the
	base unit. Move closer and try again.
try again later.	L The handset’s registration may have been
	canceled. Re-register the handset (page 24).
Check tel line	L The supplied telephone line cord has not been
	connected yet or not connected properly. Check
	the connections (page 9).
Dial locked	L Dial lock is turned on. To turn it off, see page 15.
Don’t use this	L A wrong type of batteries such as Alkaline or
battery.	Manganese was inserted. Use only the
	rechargeable Ni-MH batteries noted on page 4,
	10.
Error!!	L The handset’s registration has failed. Move the
	handset and base unit away from all electrical
	appliances and try again.
	L The entered password was wrong in
	programming dial lock. Enter the correct
	password.
Insert battery	L The handset was placed on the base unit or
	charger without batteries. Insert the batteries
	properly (page 10).
Invalid	L There is no handset registered to the base unit
	matching the handset number you entered.
	L The handset is not registered to the base unit.
	Register the handset (page 24).
No link to base.	L The handset has lost communication with the
Reconnect AC adaptor.	base unit. Move closer to the base unit and try
	again.
	L Unplug the base unit’s AC adaptor to reset the
	unit. Reconnect the adaptor and try again.
	L The handset’s registration may have been
	canceled. Re-register the handset (page 24).
Phonebook full	L The phonebook memory is full. Erase
	unnecessary entries (page 17).

32