Programming
20
Programming using the direct commands1{MENU} i {#}
2Enter the desired feature code.
3Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
LTo exit the operation, press {OFF}.
Note:
LIn the following table, <> indicates the default settings.
Feature Feature
code
Setting code System
setting*1
Page
Auto talk*2 {2}{0}{0}{1}: On {0}: <Off>–13
Block calls {2}{1}{7}–r22
Date and time {1}{0}{1}–r12
Deregistration {1}{3}{1}––24
Dial lock {2}{5}{1}–r15
HS registration
(Handset registration)
{1}{3}{0}––24
Key tone*3 {1}{6}{5}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Night mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>–23
Night mode
(Start/End)
{2}{3}{7}<11:00 PM/06:00 AM>– 23
Ringer tone*4
(Handset)
{1}{6}{1}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
––
Ringer volume
(Handset)
{1}{6}{0}{1}: Low {2}: Medium
{3}: <High> {0}: Off
––
Set alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
–23
Set area code {2}{5}{5}–r26
Set dial mode {1}{2}{0}{1}: Pulse{2}: <Tone>r12
Set flash time*5 {1}{2}{1}{1}: <700ms> {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
r14
Set line mode*6 {1}{2}{2}{1}: A {2}: <B>r–
TG9361BX(e)_OI.book Page 20 Wednesday, April 16, 2008 3:08 PM