Caller ID Problem Cause/solution | Panasonic KX-TG9361BX manual

TG9361BX(e)_OI.book Page 35 Wednesday, April 16, 2008 3:08 PM

	Useful Information

Caller ID

Problem	Cause/solution
Caller information is not	L You need to subscribe to Caller ID service.
displayed.	Contact your service provider/telephone
	company for details.
	L If your unit is connected to any additional
	telephone equipment such as a Caller ID box or
	cordless telephone line jack, plug the unit
	directly into the wall jack.
	L If you use a DSL/ADSL service, we recommend
	connecting a DSL/ADSL filter between the base
	unit and the telephone line jack. Contact your
	DSL/ADSL provider for details.
	L Other telephone equipment may be interfering
	with this unit. Disconnect the other equipment
	and try again.
Caller information is	L Depending on your service provider/telephone
displayed late.	company, the unit may display the caller’s
	information at 2nd ring or later.
	L Move closer to the base unit.
Time on the unit is shifted.	L Incorrect time information from incoming Caller
	ID changes the time. Set the time adjustment to
	“Manual” (off) (page 21).

35

Image 35

Panasonic KX-TG9361BX operating instructions Caller ID Problem Cause/solution

Contents

Operating Instructions Making/Answering Calls Caller ID ServiceIntroduction Preparation Product information Feature highlights Expanding your phone system Accessory informationSupplied accessories Replacement battery information For your safety Base unit location/avoiding noise Important safety instructionsBattery For best performance Splash resistance handset only EnvironmentRoutine care Handset ControlsBase unit Connections Display If you subscribe to a DSL/ADSL service Battery installation and replacement Operation Operating time Battery chargeBattery level Battery icon Date and time Symbols used in these operating instructionsSetting up the unit before use Dialing mode Auto talk Erase iYes iOFF Pause for PBX/long distance service usersAnswering calls IPAUSE Flash Useful features during a callHold Mute Call share Temporary tone dialing for rotary/pulse service usersDial lock Handset clarity booster Finding and calling a phonebook entry Shared phonebookAdding entries Next Editing entriesErasing entries Chain dial Main menu Sub-menu Programmable settingsProgramming by scrolling through the display menus Menu TG9361BXeOI.book Page 19 Wednesday, April 16, 2008 308 PM Feature Setting code System Code Programming using the direct commands Caller IDauto Feature Setting code System Code Setting*1 Block calls Caller ID subscribers only Special instructions for programmable settingsNight mode Operating additional handsets AlarmRegistering a unit Deregistering a handset Registering a handset to a base unit Ringer ID Using Caller ID serviceCaller ID features Caller list Select Storing caller information into the phonebook Answering an intercom call IntercomMaking an intercom call Handset Press OFF Handset locatorBase unit Locator Wall mounting To attach the belt clip To remove the belt clip Belt clipHeadset optional Display message Cause/solution Error messages Programmable settings Problem Cause/solution TroubleshootingGeneral use Problem Cause/solution Making/answering calls, intercom Battery recharge Problem Cause/solutionProblem Cause/solution Caller ID Problem Cause/solution Dial lock Important Liquid damage Problem Cause/solution Specifications Index TG9361BXeOI.book Page 39 Wednesday, April 16, 2008 308 PM Copyright PNQX1259ZA CM0408PF0For your future reference