TG9361BX(e)_OI.book Page 23 Wednesday, April 16, 2008 3:08 PM
Programming
L If you have set the alarm, the alarm sounds even if the night mode is turned on.
Setting the start and end time
1{MENU} i{#}{2}{3}{7}
2Enter the desired hour and minute you wish to start this feature.
3{AM/PM}: Select “AM” or “PM”. i
{V}
4Enter the desired hour and minute you wish to end this feature.
5{AM/PM}: Select “AM” or “PM”.
6{Save} i{OFF}
Note:
LTo correct a digit, press {^}, {V}, {<}, or {>} to move the cursor to the digit, then make the correction.
Turning night mode on/off
1{MENU} i{#}{2}{3}{8}
2{V}/{^}: Select “On” or “Off”. i
{Save} i{OFF}
Note:
L When the night mode is turned on, “Night mode” is displayed during the selected period.
Alarm
You can set one of 2 different alarm options (once or daily) at a time for each handset. An alarm sounds at the set time for 1 minute.
You can choose an alarm sound from 3 tones and 4 melodies.
Important:
L Set the date and time beforehand (page 12).
1{MENU} i{#}{7}{2}{0}
2{V}/{^}: Select the desired alarm option. i{Select}
Off | Turns alarm off. Go to |
| step 5. |
Once | An alarm sounds once at |
| the set time. Enter the |
| desired date, month, and |
| year. |
Daily | An alarm sounds daily at |
| the set time. |
3Set the desired time. i{OK}
4{V}/{^}: Select the desired ringer tone. i{Save}
L If you set a tone or melody, we recommend selecting a different one for outside calls.
5{OFF}
Note:
L To stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
LIf you select “Once”, the setting changes to “Off” after the alarm sounds.
L When the ringer volume for outside calls is set to off (page 20), the alarm sound is heard at a low level.
Registering a unit
Operating additional handsets
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 4 for information on the available model.
23
