TG9361BX(e)_OI.book Page 11 Wednesday, April 16, 2008 3:08 PM
Preparation
Note:
L When replacing batteries, remove the old batteries.
Battery charge
Place the handset on the base unit or charger for about 7 hours before initial use.
LWhile charging, “Charging” is displayed and the charge indicator on the handset lights up. When the batteries are fully charged, “Charge completed” is displayed.
Base unit:
Note:
L It is normal for the handset to feel warm during charging.
L If you want to use the handset immediately, charge the batteries for at least 15 minutes.
L Clean the charge contacts of the handset, base unit, and charger with a
soft and dry cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.
Battery level
Battery icon | Battery level |
5High
6Medium
7Low
L When flashing: Needs to be charged.
8Empty
Note:
L The batteries need to be charged if the handset beeps while you are engaged in a call.
Panasonic
Operation | Operating time |
In continuous | 5 hours max. |
use |
|
Not in use | 11 days max. |
(standby) |
|
While using the | 3 hours max. |
clarity booster |
|
feature (page |
|
15) |
|
Note:
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.
L The battery level may not be displayed correctly after you replace the batteries. In this case, place the
11
