Extron electronic DVS 204 D 12V, DVS 204 12V manual Input Configuration, Signal

Installation and Operation, cont’d

Power

on

EXTRON DVS204D

2 sec.

NEXT

852x

480 @60

MENU

INPUT

CONFIG

MENU

OUTPUT

CONFIG

MENU

BLANKING

CONFIG

MENU

MEMORY

PRESET

MENU

ADVANCED

CONFIG

MENU

EXIT

MENU

2 sec.

MENU

2 sec.

INPUT 1

CMPOSITE

	2 sec.
	NO
2 sec.	SIGNAL

*The No Signal default menu only occurs if there is no signal present at the currently selected input connector.

Main menus

To return to the default screens, let the DVS 204 time-out for 10 seconds, or press the Menu button until the Exit Menu menu appears, then press the Next button.

Submenus are accessed from a main menu by pressing the Next button. If you press the Menu button while a submenu is active, the next main menu will become active. For example, the menu will change from the Input Configuration menu or its submenus to the Output Configuration main menu.

Input Configuration

The following flowchart provides an overview of the Input Configuration submenus and the options for each setting.

EXTRON
DVS204D
MENU
INPUT	NEXT
CONFIG

NOTE Input 1 can only accept composite video.

Input 3 can only accept S-video. Only Inputs 2 and 4 can

be configured for different video types, although an SDI input can be assigned from any Input Configuration menu.

INPUT 2	NEXT	INPUT 4	NEXT	SDI IN	NEXT
COMPNENT		RGBcvS		* 1 2 3 <4>
Input 2 video types		Input 4 video types		Assign SDI to Input #
• Composite		• RGB pass-through (default)		• 1, 2, 3, 4, * (none)
• S-video		• RGBS		NOTE The SDI input can be assigned
• Component (default)		• RGBcvS

to any input. Once assigned to a specific input, only an SDI signal can be accepted on that input.

SDI can be disabled by selecting the *.

2-10 DVS 204 • Installation and Operation