Extron electronic DVS 204 D 12V, DVS 204 12V manual Serial Communication, cont’d

Serial Communication, cont’d

Command/response table for SIS commands

Command	ASCII Command	Response	Additional description
	(host to scaler)	(scaler to host)
Input selection
Select video input	X5 !	C X5	Video Input X1 .
Example:	3!	C3	Example: select video Input 3.

Memory preset

Recall input configuration preset

Save input configuration preset

X19	.	Rpre	X19	Recall input preset	X19		.
	,	Spre		Save to input preset				.
X19			X19			X19

Input video type (Inputs 2 and 4 only)

Set video signal type X5 * X4 \ X5 Typ X4

Example:	2*3\	2Typ3
View the video signal type	X5 \	X5 Typ X4
Example:	2\	2Typ3

Select Input X5 (Inputs 2 and 4 only) and assign it a video type X4 . Video type X4 is defined to be: 1 = video, 2 = S-video, 3 = YUV, 4 = RGB, 5 = RGBS, 6 = RGBcvS, and SDI.

For SDI input, substitute

X5 with X1 where the SDI input can be assigned to Input X1 (0, 1, 2, 3, or 4 with 0 meaning there is no SDI input).

Example: set Input 2 to 3 (YUV) Show the video signal type. Example: show Input 2 video type = 3.

Color

Set a specific color value	X10	C	Col	X10	Specify a color adjustment level.
Example:	47C		Col047		Example: set the color adjustment to 47.
Increment	+C		Col		Increase color adjustment level.
				X10
Decrement	-C		Col	X10	Decrease color adjustment level.
View the color value	C		Col		Show the color adjustment.
				X10

Tint

Set a specific tint value	X10	T	Tin	X10	Specify a tint adjustment level.
Example:	176T		Tin176		Example: set the tint to 176.
Increment	+T		Tin		Increase tint adjustment level.
				X10
Decrement	-T		Tin	X10	Decrease tint adjustment level.
View the tint value	T		Tin		Show the tint adjustment.
				X10

Contrast

Set a specific contrast value		X10
Increment	+^
Decrement	- ^
View the contrast value	^

^	Con	X10	Specify the contrast adjustment.
	Con		Increase the contrast.
		X10
	Con		Decrease the contrast.
		X10
	Con		Show the contrast setting.
		X10

Brightness

Set a specific value	X10
Increment	+Y
Decrement	-Y
View the brightness value	Y

Y	Brt	X10	Specify the brightness
			adjustment.
	Brt		Increase the brightness.
		X10
	Brt		Decrease the brightness.
		X10
	Brt		Show the brightness setting.
		X10

Detail mode

Set the detail level	X13
View the detail value	D
Increment	+ D
Decrement	- D

DDet Det Det Det

X13

X13

X13

X13

Specify the detail level. Show the detail setting. Increase detail level.

Decrease detail level.

3-4 DVS 204 • Serial Communication