13/ IF OPERATING ABNORMALITIES OCCUR
Problem | Possible Causes | What to do? |
The appliance will not restart | - Door opened during a | - Wait for the time delay to end |
| washing cycle. | (controlled internally by the |
|
| appliance). |
|
|
|
The appliance does not drain | - The cover has not been remo- | - Remove the cover. |
(Cf. table fault d02). | ved from the sink’s |
|
| - Drain hose kinked. | - Check the drain hose line |
|
| behind the machine is OK. |
| - Filters totally blocked. | - Remove and clean the filters |
|
| and the drain. |
| - Pump blocked. | - Initiate a Soaking programme |
|
| If the fault persists, call a tech- |
|
| nician. |
The appliance will no longer | - installation of | - adhere to the drainage tube |
function (see table, fault 14). | nage system: drainage too low | installation dimensions. |
| down or pipe pushed too far in. |
|
| - siphoning: the appliance is |
|
| emptying as the same time as |
|
| it is filling up. |
|
|
|
|
• POOR WASHING RESULTS
Problem | Possible Causes | What to do? | |
Food traces and deposits in the | - Items poorly arranged (mas- | - Arrange the items properly. | |
glasses | ked by another larger item or | Use the most | appropriate |
| situated underneath it, items | areas and accessories for each | |
| nested or jammed together). | type of item (see instructions). | |
| - Upper spray arm blocked by | - Check that the | spray arm |
| cutlery or a dish etc. | rotates freely. Set the basket in | |
|
| the high position if necessary. | |
|
| - Check the filter’s facing and that | |
| - Filter poorly locked and lifting | the filter is locked in place (push | |
| during washing. | it in fully, turning it to the right). | |
|
| - Remove all the filters and clean | |
| - Micro filter screen clogged. | them (in warm water), including | |
|
| the micro filter’s screen (once | |
|
| a month). |
|
|
| - Remove the spray arm by turn- | |
| - One or more holes in the spray | ing the lever a quarter of a turn | |
| arm blocked. | and clean it under the tap (do | |
|
| not use any tool that could | |
|
| damage the holes). | |
|
| the spray arm. |
|
|
|
| |
Traces of grease | - Detergent dose too low; ineffi- | - Increase the dose; try another | |
| cient detergent; stale product. | detergent. |
|
| - Inappropriate programme | - Select a programme with a | |
| (temperature too low; duration | higher temperature. | |
| too short). |
|
|
|
|
|
|
33