CDA WF250SS manual White marks Chalky film removable with, Tener is set correctly. Adjust it

13/ IF OPERATING ABNORMALITIES OCCUR

• POOR WASHING RESULTS...

Problem		Possible Causes		What to do?
White marks		- Chalky film (removable with	- Check that there is salt in the
(identify what type)		vinegar).	tank (light unlit = OK).
			- Check the water hardness at
			the tap and that the water sof-
			tener is set correctly. Adjust it
			to a higher level if necessary.
			- Water too hard for using a “4-
			in-1” detergent without the
		- Traces of salt (items have a	addition of salt.
			- Check that the stopper on the
		salty taste).	salt container is closed correctly.
White marks		- Glass cloudy because water	- Check the water hardness at
(identify what type)		too soft (cannot be removed).	the tap and that the water sof-
			tener is set correctly. Some
			detergents in pellet form are
			more aggressive to glasses
			and decorations (change the
			product and use a protective
			product if necessary).
Coloured marks (tea, wine, cof-		- Items poorly arranged	- Turn the cavities in the items
fee)		- Detergent dose too low; ineffi-	towards the jets.
			- Increase the dose; try another
		cient detergent	detergent.
		- Programme temperature too
			- Select a more suitable programme
		low.	with a higher temperature.
		- If you use a multifunction
			- Use	the “4-in-1”	option
		product.
			(depending on the model).
Streaks or dried droplets	on	- Lack or insufficient amount of	- Check the indicator light and
glasses		rinsing product.	fill the tank completely. Adjust
			the dispensing unit to a higher
		- Rinsing product out-of-date or	position if necessary.
			- Use a recent product (a good
		inefficient.	product dilutes easily and
		- If you use a multifunction	foams in cold water).
			- Use the “4-in-1” option with a
		product.
			setting	prioritizing	drying
			(parametering from the menu –
			depending on the model).
Dried-on marks on glasses, dull-		- If you use a multifunction	- Use the “4-in-1” option with a
ness.		product.	setting	prioritizing	brilliance
			(parametering from the menu –
			depending on the model).

34