CDA WF250SS manual Details common to all models, Tests to Standard EN

Page 37

14/ INDICATIONS FOR THE TESTING LABORATORIES

•Details common to all models

— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

12 standard place settings

— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Figs. A-B-C; see next page

—Loading as per the indications on next page, without side shelves or stemmed glass support, and 5 cup/saucer supports

(4 for12 saucers & 1 for 2 cups)

— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Low position

— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - -

3

— Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - -

0-10°F

For detailed information on the comparison tests regarding the level of soiling, the types of crockery and cutlery, etc., contact the equipment manufacturer before commencing the tests.

•Tests to Standard EN 50242:

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - -

“Bio”

— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

30 g of detergent B

•Tests according to the mixed IEC 436/DIN 44990 method

— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - -

“Eco”

— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

5 + 25 g of detergent B

NB: When conducting tests using a multi-function tablet:

- Check that the water softener is correctly set for the water hardness (Cf.: Chapter 5 / DETER-

GENT PRODUCTS AND ADJUSTING THE WATER SOFTENER ? • FOR MULTI-FUNCTION PRO- DUCTS)

- Pull out the detergent distribution drawer and place the tablet in the interior compartment.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Page Levelling by adjusting the feet Installations ManualImportant Warnings Building in your appliance under a worktop Installation dimensionsYou can use the top of the appliance as a worktop Appliances BUILT-IN Under a HOB SOUND-PROOFING SealsConnecting to the Water Supply Draining Away the Waste Water Before connecting your appliance, ensure that Replacing the power cableElectrical Connection Appliances delivered without a plugPage Contentscontents Installation Safety InstructionsChildren’s safety UseECONOMICAL, Environmentally Friendly Washing Environmental ProtectionRinsing product dispenser Regenerating salt tank Waste filter Main filterPresentation of the Control Panel There are several types of products ② Regenerating salt for your dishwa10F Hardness TableSoft OptionalTraditional tablets For Traditional ProductsPowders or liquids Fig To adjust the water softener For MULTI-PURPOSE Products Using the ButtonTo change the option if necessary Loading the multi-purpose tablet dispenserFilling with regenerating salt Fig Regenerating salt indicatorThis illuminates when rinse aid is required Rinse aid indicator lightLower Basket AdviceVery important Upper Basket Cutlery basket slides to allow flexible loading Cutlery BasketImportant Error in programme or malfunction Locked programme accessIndicator lights flash to denote errors as follows Anti-overflow systemSoak Hot Pre-wash Very dirtySwitching the appliance off Delaying a wash programmeCancelling a programme Running the programme immediatelyRe-installation Cleaning the Waste FiltersPeriodically If not using your dishwasher for a prolonged periodBefore Calling for Service Summary of the FaultsRelating to PROGRAMMING, Display Indicator LightsPoor Washing Results Cient detergent Detergent Programme temperature too Tener is set correctly. Adjust itCheck the indicator light Setting Prioritizing DryingPoor Drying Results Poor OperationOriginal Parts Intervention WorkTests to Standard EN Details common to all modelsTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4
Top Page Image Contents