Optional Remote Location Installation | GE PNRQ21LRB, PNRQ21LBN

Installation Instructions

D. OPTIONAL REMOTE LOCATION INSTALLATION

(requires additional part)

1.Turn off the cold water supply.

2.Complying with plumbing codes, install a fitting on the cold water pipe to adapt 1/4″ OD tubing. A typical connection is shown in illustration below. Make sure a water supply valve is used.

3.If the RO unit is to be installed more than 6 feet from the valve, replace the yellow

banded inlet tubing with a longer length of GE 1/4″ tubing. A 33 foot length of 1/4″ tubing is available through GE Parts and Services at 1.800.626.2002, part number WS07X10018. DO NOT SUBSTITUTE

TUBING OF UNKNOWN QUALITY.

4.If the RO unit is to be installed more than 6 feet from the faucet, replace the blue

banded outlet tubing with a longer length of GE 3/8″ tubing. A 33 foot length is available through GE Parts and Services at 1.800.626.2002, part number WS07X10019. See Faucet Installation on page 13 for more details. DO NOT SUBSTITUTE TUBING OF

UNKNOWN QUALITY.

Preferred water supply connection
(using compression fitting)
	Water supply valve
	Insert (not included)
	Ferrule
Cold
water	To RO
pipe	″ (yellow banded)
1/4	″ (yellow banded)

tubing to inlet

If you are using copper tubing, DO NOT connect it directly onto the RO unit. Purchase a connector and use a short length of the yellow banded tubing provided to make final connection to RO. Do not use copper tubing to attach to icemaker or faucet.

E.REMOVAL AND RE-INSTALLATION OF INLET VALVE (required only if

inlet valve needs to be removed to complete Step 5 on page 13)

1.Remove inlet valve (F) from adapter (C) using adjustable wrench on valve body. See illustration below for detail. DO NOT

USE WRENCH ON HEX NUT END OF VALVE AS LEAK MAY OCCUR.

(C)

Adapter

(F) Inlet valve

2.Remove all sealing tape from inlet valve

(F) and adapter (C) threads.

3.Hand tighten assembled adapter (C) onto supply valve (A) for the proper size installation. Be sure the gaskets (G), as shown on page 13, are in place before final assembly. Finish tightening with adjustable wrench. Be careful not to overtighten or cross thread as damage to threads may occur.

4.Using white thread sealing tape provided, apply approximately 9 wraps of tape around the large threads on inlet valve (F) in a clockwise direction, as shown below.

5.Hand tighten inlet valve (F) into the adapter (C), then finish tightening with adjustable wrench. DO NOT USE WRENCH ON HEX

NUT END OF VALVE AS LEAK MAY OCCUR.

PNRQ21LRB, PNRQ21LBN specifications

The GE PNRQ21LBN and PNRQ21LRB are two advanced models from General Electric's line of innovative HVAC (Heating, Ventilation, and Air Conditioning) solutions. Designed with both efficiency and performance in mind, these units cater to residential and commercial needs, ensuring comfort in a variety of settings.

One of the standout features of the PNRQ21LBN and PNRQ21LRB is their energy efficiency. Both models utilize GE's cutting-edge inverter technology, which allows for variable speed operation. This means that the compressor can adjust its output based on the specific cooling or heating needs, leading to significant energy savings while maintaining optimal indoor climates. As a result, these units are not only environmentally friendly, but also cost-effective over time.

Another key characteristic is their quiet operation. The engineers at GE have invested in sound-dampening technologies that minimize operational noise, allowing users to enjoy a peaceful atmosphere, whether in a home, office, or commercial space. This is particularly beneficial for areas where noise sensitivity is crucial, such as bedrooms or conference rooms.

The PNRQ21LBN and PNRQ21LRB also come equipped with advanced air filtration systems. These systems effectively remove dust, allergens, and other airborne particles, contributing to improved indoor air quality. The filters are easily accessible for maintenance, ensuring that users can keep their systems running at peak performance with minimal effort.

User-friendly interfaces are another hallmark of these GE models. They feature intuitive control options that allow users to set schedules, adjust temperature preferences, and even monitor energy usage. This level of control empowers users to optimize their HVAC systems according to their lifestyle and needs.

In terms of design, both models boast a sleek and modern aesthetic, making them suitable for various architectural styles. They can fit seamlessly into any environment, enhancing the overall appeal of the space.

Overall, the GE PNRQ21LBN and PNRQ21LRB exemplify a blend of efficiency, quiet operation, advanced filtration, and user-centric design, making them ideal choices for anyone looking to enhance comfort and improve energy efficiency in their living or working environments.