GE PNRQ21LBN Chlorine taste and/or, Odor in the Reverse, Osmosis product water, Water slowly

Page 22

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Before you call for service…

Troubleshooting Tips

Problem

Possible Causes

What To Do

Chlorine taste and/or

The ppm of chlorine in your

If the water supply contains more than 2.0 ppm of chlorine,

odor in the Reverse

water supply exceeds maximum

 

additional filtering of the water supply to the Reverse

Osmosis product water

limits and has destroyed the

 

Osmosis is needed. Correct this condition before doing

 

Reverse Osmosis membrane.

 

maintenance on the Reverse Osmosis system.

 

 

 

 

The prefilter is no longer

Replace the Reverse Osmosis membrane cartridge,

 

removing chlorine from

 

flow control, screen, prefilter, postfilter and battery

 

the water supply.

 

in the faucet base.

 

 

 

 

Other taste and/or odor

High quality product water

This is normal.

 

may have a different taste

 

 

 

than what you’re used to.

 

 

 

 

 

 

 

Low water usage.

Completely drain system and allow to refill.

 

 

 

 

Contamination in product

Use sanitizing procedures.

 

water storage.

 

 

 

 

 

 

Prefilter and postfilter

Replace the prefilter and postfilter.

 

need to be changed.

Sanitize system.

 

 

 

 

 

Water leaking from

Drain side of faucet air gap

Inspect and eliminate restriction or plug. It is important

faucet air gap hole

(3/8tubing) plugged,

 

that there are no dips, loops or low spots in the drain line

 

restricted or incorrectly

 

from the faucet air gap to the drain pipe. Refer to

 

connected to the drain.

 

Installation Instructions for proper drain connection.

 

 

 

If drain line adapter was used as the drain point,

 

 

 

periodic inspection/cleaning is recommended.

 

 

 

System makes product

This is normal.

Water flow rate will be lower than your regular faucet.

water slowly

 

It takes 3–4 hours to fill the tank.

 

 

 

 

 

 

Water supply to the Reverse

Increase water pressure, precondition the water, etc.,

 

Osmosis system not within

 

as needed to conform before doing maintenance on

 

specifications.

 

the Reverse Osmosis system.

 

 

 

 

Prefilter cartridge plugged

Replace the prefilter. If rate does not increase, replace

 

with sediments.

 

the postfilter.

 

 

 

 

Reverse Osmosis membrane

Replace Reverse Osmosis membrane cartridge, flow

 

plugged with sediments.

 

control and battery in the faucet base.

22

Image 22
Contents Osmosis Filtration System Safety Precautions Specification guidelines Maximum iron, manganese, hydrogen sulfide ppmAbout the reverse osmosis system How the Reverse Osmosis System WorksGe.com Before Beginning Installation Contents Included With ProductFeed Water Basement InstallationTUBING/FILTER Detail Filtration Drain ConnectionReverse Osmosis Assembly Mounting System InstallationPreferred Installation Feed Water SupplyOptional Home Installation Optional Rigid Pipe InstallationOptional Remote Location Installation Requires additional partInstalling the Tubing to Tank and Faucet Tubing and Flow Restrictor InstallationFlow Restrictor Replacement Procedure Faucet Assembly Faucet Mounting InstallationBattery Installation Power Cord InstallationOptional ONE Person Faucet Tubing Installation Preferred Installation Option A-BASEMENT Access Installation Filtration Drain ConnectionInstallation Instructions Filtration Drain Connection System Startup Procedure Storage Tank InstallationStorage Tank and Startup Care and cleaning of the reverse osmosis system Consumer Support TroubleshootingSafety Carbon Block Thin Film PolyamideBefore you call for service… Osmosis product water Chlorine taste and/orOdor in the Reverse Other taste and/or odorLeaks at fittings No WaterSounds you may hear Parts list Parts catalog REF. no GE Part no Part DescriptionGE Reverse Osmosis System Warranty One YearLa section Française FonctionnementConservez CES Instructions Guide des spécifications Au sujet du système de filtration par osmose inversée Ce que ce système accomplitFonctionnement Avant DE Commencer ’INSTALLATION Outillage ET Matériel Requis Pour L’INSTALLATIONListe DES Composants DE L’APPAREIL EAU D’ALIMENTATION Installation Dans UN SOUS-SOLDétail DES TUYAUX/DU Filtre Robinet ROInstallation DU Système DE Montage Ensemble D’OSMOSE InverséeInstallation Préférentielle Alimentation D’EAUInstructions d’installation Alimentation D’EAU suite Installation Optionnelle Effectuée Dans UN DomicileInstallation À Distance Optionnelle des pièces Installation DU Tuyau AU Réservoir ET AU Robinet Installation DU Tuyau ET DU Réducteur DE DébitProcédure DE Remplacement DU Réducteur DE Débit Installation DU Robinet Montage DE RobinetInstallation DE LA Pile Installation DU Cordon D’ALIMENTATION D’ÉLECTRICITÉRaccordements À LA Conduite DE Vidange Installation Préférentielle Option a InstallationDU Système AU SOUS-SOL Maximum Tuyau de Installation DU Réservoir DE Stockage Procédure DE Mise EN Marche DU SystèmeDe sécurité Aseptisation du système d’osmose inversée MesuresBloc de charbon Pellicule mince en polyamideAvant d’appeler un réparateur Ou présente des odeurs Problème Causes possibles Correctifs ’eau du système deFiltration goûte le chlore De chloreSons que vous pouvez Problème Causes possibles Correctifs Pas d’eauFuites aux raccords EntendreListe de pièces PNRQ21LBN, PNRQ21LRBCatalogue des pièces Page Garantie du système de filtration par osmose inversée de GE Un anSoutien au consommateur Service de réparationsProlongation de garantie La sección en Español Serie NoConserve Estas Instrucciones Pautas sobre las especificaciones Altura 15 diámetroSobre el sistema de Ósmosis Inversa ¿Qué hace el sistema de Ósmosis Inversa?Ge.com Antes DE Empezar LA Instalación Contenidos Incluidos CON EL ProductoConexión DEL Drenaje DE Filtración Detalle DE LOS TUBOS/FILTROAgua DE Alimentación Grifo DEL Sistema DE OIEnsambladura DEL Sistema DE Ósmosis Inversa Instalación DEL Sistema DE MontajeSuministro DE Agua DE Alimentación Instalación PreferidaInstalación Casera Opcional Instalación Opcional DE Tubería RígidaInstalación EN UNA Ubicación Remota Cómo Retirar Y Volver aCómo Instalar LA Tubería AL Tanque Y AL Grifo Instalación DE Tubería Y Limitador DEL FlujoProcedimiento DE Reemplazo DEL Limitador DEL Flujo Ensambladura DEL Grifo Instalación DE Montaje DEL GrifoInstalación DEL Cable Eléctrico Instalación DE LA BateríaConexión DEL Drenaje DE Filtración DE Drenaje Adaptador DE LA TuberíaInstalación Secundaria Opción D-INSTALACIÓN DEL Procedimiento Para EL Arranque DEL Sistema Tanque DE Almacenamiento Y ArranqueInstalación DEL Tanque DE Almacenamiento Instalación Solucionar problemas Cuidado y limpieza del sistema de Ósmosis InversaPrecaución Antes de la Cómo desinfectar el sistema de Ósmosis InversaKit de prueba del agua Poliamida de película delgadaAntes de llamar a solicitar servicio… El sistema produce el Otro sabor y/u olorAgua muy lentamente Fugas en los accesorios Consejos para la solución de fallasNo hay agua EscucharLista de partes Catálogo de partes NO. REF. Parte no Descripción DE LA ParteNotas Seguridad Operación Instalación Garantía del Sistema Ósmosis Inversa Un añoGarantías ampliadas Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesoriosSchedule Service Consumer Support

PNRQ21LRB, PNRQ21LBN specifications

The GE PNRQ21LBN and PNRQ21LRB are two advanced models from General Electric's line of innovative HVAC (Heating, Ventilation, and Air Conditioning) solutions. Designed with both efficiency and performance in mind, these units cater to residential and commercial needs, ensuring comfort in a variety of settings.

One of the standout features of the PNRQ21LBN and PNRQ21LRB is their energy efficiency. Both models utilize GE's cutting-edge inverter technology, which allows for variable speed operation. This means that the compressor can adjust its output based on the specific cooling or heating needs, leading to significant energy savings while maintaining optimal indoor climates. As a result, these units are not only environmentally friendly, but also cost-effective over time.

Another key characteristic is their quiet operation. The engineers at GE have invested in sound-dampening technologies that minimize operational noise, allowing users to enjoy a peaceful atmosphere, whether in a home, office, or commercial space. This is particularly beneficial for areas where noise sensitivity is crucial, such as bedrooms or conference rooms.

The PNRQ21LBN and PNRQ21LRB also come equipped with advanced air filtration systems. These systems effectively remove dust, allergens, and other airborne particles, contributing to improved indoor air quality. The filters are easily accessible for maintenance, ensuring that users can keep their systems running at peak performance with minimal effort.

User-friendly interfaces are another hallmark of these GE models. They feature intuitive control options that allow users to set schedules, adjust temperature preferences, and even monitor energy usage. This level of control empowers users to optimize their HVAC systems according to their lifestyle and needs.

In terms of design, both models boast a sleek and modern aesthetic, making them suitable for various architectural styles. They can fit seamlessly into any environment, enhancing the overall appeal of the space.

Overall, the GE PNRQ21LBN and PNRQ21LRB exemplify a blend of efficiency, quiet operation, advanced filtration, and user-centric design, making them ideal choices for anyone looking to enhance comfort and improve energy efficiency in their living or working environments.