Hoshizaki MRH, MWH KML-451MAH, MWH KML-631MAH, KML-250MAH How to Remove Panels See Fig

Page 13

•Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the fan blade (if applicable) turns freely.

•Check that the compressor is snug on all mounting pads.

•The icemaker can be installed on a dispenser unit or ice storage bin. The ice storage bins listed below are recommended.

Model Number

Bin Width

Recommended Hoshizaki Ice Storage Bin

KML-250M_H

30" or Wider

B-500 Series

KML-351M_H

 

 

KML-451M_H

 

 

KML-631M_H

 

 

For further options, contact your local Hoshizaki distributor.

•NOTICE! Remote model must be connected to an appropriate remote condenser unit. The remote condenser unit listed below is recommended. Connection to a different remote condenser unit will void the warranty unless Hoshizaki approves a different remote condenser unit for your specific application. For further details, contact your local Hoshizaki distributor.

Model Number Recommended Hoshizaki Remote Condenser Unit

KML-631MRH URC-9F

C. How to Remove Panels

See Fig. 1

•Front Panel: Remove the screw. Lift up and towards you.

•Top Panel: Lift up at front slightly, push rearward, and lift off.

•Right Side Panel: Remove the screw. Slide forward slightly and lift off.

•Front Insulation Panel: Lift up slightly, and pull towards you.

•Top Insulation Panel: Lift off.

Top Panel

Top Insulation Panel

Front Insulation Panel

Front

Panel

Screw

Screw

Fig. 1

Right Side Panel

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents KML-631MAH, MWH, MRH Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates a situation which could result in damage to Appliance or propertyAdditional Warning for Remote Models KML-250MH Specifications Electrical and Refrigerant DataKML-351MH KML-631MH KML-451MHAir-Cooled Models MAH Units mm Dimensions/ConnectionsUnits mm Water-Cooled Models MWHRemote Models MRH Remote Condenser Unit URC-9F use with KML-631MRH Checks Before Installation II. Installation and Operating InstructionsLocation How to Remove Panels See Fig Dispenser Unit/Ice Storage Bin and Icemaker Setup SetupIntentionally Left Blank For All Models Electrical ConnectionAdditional Warnings for Remote Models  WARNING Water Supply and Drain Connections See Figs through Icemaker Air-Cooled and Remote ModelsConnection to an Open Drain System Water-Cooled ModelsWater-Cooled Models Connection to a Closed Loop System Water-Cooled Models Model Shown KML-631MWH Location Installation of Remote Condenser UnitSetup Checks Before InstallationLine Set Size and Refrigerant Charge Factory Line Set Installation Line Set InstallationField Fabricated Line Set Installation Do not USE Thread Sealant Electrical Connection Stacking Remote Condenser Unit Final Checklist Additional Notice for Remote Models StartupMaintenance Schedule III. MaintenanceCleaning Procedure Cleaning and Sanitizing InstructionsSanitizing Procedure Following Cleaning Procedure Page Remove the water from the icemaker water supply line IV. Preparing the Icemaker for Periods of Non-UseDrain the water tank Page Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 28 pages 29.45 Kb Manual 94 pages 41.69 Kb

MWH KML-351MAH, KML-250MAH, MWH KML-631MAH, MWH, MRH specifications

The Hoshizaki KML-250MAH is a premium ice maker renowned for its innovative design and advanced technology, catering to the high-demand needs of commercial establishments. This model combines efficiency, reliability, and superior performance, making it an excellent choice for restaurants, bars, and hotels.

One of the standout features of the KML-250MAH is its high production capacity. This ice maker can produce up to an impressive 265 pounds of crescent ice daily, ensuring your establishment has a consistent supply of ice for beverages and food preservation. The crescent-shaped ice not only allows for optimal cooling but also enhances presentation, making it suitable for a variety of applications.

The KML-250MAH incorporates advanced technologies to promote efficient operation. The unit uses an air-cooled refrigeration system, which ensures better energy efficiency while reducing operational costs. The machine is designed with a dual condensing fan that effectively optimizes airflow, thereby ensuring consistent ice production in different ambient temperatures, which is crucial in varying commercial kitchen environments.

The durability of this model is another key characteristic. Constructed with stainless steel, the KML-250MAH is built to withstand the rigors of daily commercial use while resisting rust and corrosion. The heavy-duty components used in this ice maker enhance its longevity, making it a smart investment for any business.

In addition, the KML-250MAH is designed with user-friendly features, including a built-in cleaning cycle that simplifies maintenance and ensures hygiene. Its ergonomic control panel provides users with easy access to settings and operational status, enhancing the overall user experience.

Another noteworthy aspect of the Hoshizaki KML-250MAH is its reduced water consumption. This ice maker operates using significantly less water compared to competitors, contributing to a lower environmental impact and cost savings over time.

To sum up, the Hoshizaki KML-250MAH stands out with its high production capacity, robust stainless steel construction, efficient air-cooled technology, user-friendly operation, and eco-conscious design. These features make it an ideal choice for businesses seeking a reliable and high-performing ice-making solution that meets the demands of a bustling commercial environment.
Top Page Image Contents