Hoshizaki MRH, MWH KML-451MAH, MWH KML-631MAH, KML-250MAH, MWH KML-351MAH Final Checklist

Page 31

H. Final Checklist

WARNING

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the dispenser unit/ice storage bin.

1)Is the icemaker level?

2)Is the icemaker in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) and the water temperature within 45°F to 90°F (7°C to 32°C) all year around?

3)Is there at least 6" (15 cm) clearance at rear, sides, and top of the icemaker?

4)Have the shipping carton, tape, and packing material been removed from the icemaker? Is the cube guide in the correct position?

5)Have all electrical and water connections been made? Do electrical and water connections meet all national, state, and local code and regulation requirements?

6)Has the power supply voltage been checked or tested against the nameplate rating? Has a proper ground been installed to the icemaker? On remote model, has a proper ground also been installed to the remote condenser unit?

7)Are the water supply and drain lines sized as specified? Are the water supply line

shut‑off valve(s) and drain valve(s) installed? Has the water supply pressure been checked to ensure a minimum of 10 PSIG and a maximum of 113 PSIG?

8)Have the refrigerant lines been checked to make sure they do not rub or touch other lines or surfaces? Has the fan blade (if applicable) been checked to make sure it turns freely?

9)On remote model:

•Is the line set sized as specified, insulated, tightened, and free of leaks and kinks?

If the line set exceeds 66 feet (20 m), has the charge been adjusted as specified?

•Has the icemaker power supply been on for a minimum of 4 hours?

•Is the remote condenser unit in a site where the ambient temperature is within

-20°F to +122°F (-29°C to +50°C) all year around?

•Is there at least 24" (61 cm) clearance around the remote condenser unit?

10)Are all components, fasteners, and thumbscrews securely in place?

11)Has the end user been given the instruction manual, and instructed on how to operate the icemaker and the importance of the recommended periodic maintenance?

12)Has the end user been given the contact information of an authorized service agent?

13)Has the warranty card been filled out and forwarded to the factory for warranty registration?

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents KML-631MAH, MWH, MRH Hoshizaki AMERICA, INC Contents Appliance or property Important Safety InformationSerious injury Indicates a situation which could result in damage toAdditional Warning for Remote Models KML-250MH Specifications Electrical and Refrigerant DataKML-351MH KML-631MH KML-451MHAir-Cooled Models MAH Units mm Dimensions/ConnectionsUnits mm Water-Cooled Models MWHRemote Models MRH Remote Condenser Unit URC-9F use with KML-631MRH Checks Before Installation II. Installation and Operating InstructionsLocation How to Remove Panels See Fig Dispenser Unit/Ice Storage Bin and Icemaker Setup SetupIntentionally Left Blank For All Models Electrical ConnectionAdditional Warnings for Remote Models  WARNING Water Supply and Drain Connections See Figs through Icemaker Air-Cooled and Remote ModelsConnection to an Open Drain System Water-Cooled ModelsWater-Cooled Models Connection to a Closed Loop System Water-Cooled Models Model Shown KML-631MWH Location Installation of Remote Condenser UnitSetup Checks Before InstallationLine Set Size and Refrigerant Charge Factory Line Set Installation Line Set InstallationField Fabricated Line Set Installation Do not USE Thread Sealant Electrical Connection Stacking Remote Condenser Unit Final Checklist Additional Notice for Remote Models StartupMaintenance Schedule III. MaintenanceCleaning Procedure Cleaning and Sanitizing InstructionsSanitizing Procedure Following Cleaning Procedure Page Remove the water from the icemaker water supply line IV. Preparing the Icemaker for Periods of Non-UseDrain the water tank Page Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 28 pages 29.45 Kb Manual 94 pages 41.69 Kb

MWH KML-351MAH, KML-250MAH, MWH KML-631MAH, MWH, MRH specifications

The Hoshizaki KML-250MAH is a premium ice maker renowned for its innovative design and advanced technology, catering to the high-demand needs of commercial establishments. This model combines efficiency, reliability, and superior performance, making it an excellent choice for restaurants, bars, and hotels.

One of the standout features of the KML-250MAH is its high production capacity. This ice maker can produce up to an impressive 265 pounds of crescent ice daily, ensuring your establishment has a consistent supply of ice for beverages and food preservation. The crescent-shaped ice not only allows for optimal cooling but also enhances presentation, making it suitable for a variety of applications.

The KML-250MAH incorporates advanced technologies to promote efficient operation. The unit uses an air-cooled refrigeration system, which ensures better energy efficiency while reducing operational costs. The machine is designed with a dual condensing fan that effectively optimizes airflow, thereby ensuring consistent ice production in different ambient temperatures, which is crucial in varying commercial kitchen environments.

The durability of this model is another key characteristic. Constructed with stainless steel, the KML-250MAH is built to withstand the rigors of daily commercial use while resisting rust and corrosion. The heavy-duty components used in this ice maker enhance its longevity, making it a smart investment for any business.

In addition, the KML-250MAH is designed with user-friendly features, including a built-in cleaning cycle that simplifies maintenance and ensures hygiene. Its ergonomic control panel provides users with easy access to settings and operational status, enhancing the overall user experience.

Another noteworthy aspect of the Hoshizaki KML-250MAH is its reduced water consumption. This ice maker operates using significantly less water compared to competitors, contributing to a lower environmental impact and cost savings over time.

To sum up, the Hoshizaki KML-250MAH stands out with its high production capacity, robust stainless steel construction, efficient air-cooled technology, user-friendly operation, and eco-conscious design. These features make it an ideal choice for businesses seeking a reliable and high-performing ice-making solution that meets the demands of a bustling commercial environment.
Top Page Image Contents