Hoshizaki KML-250MAH, MRH, MWH Important Safety Information, Serious injury, Appliance or property

Page 4

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, damage to the appliance, or damage to property.

WARNING

Indicates a hazardous situation which could result in death or

 

serious injury.

NOTICE

Indicates a situation which could result in damage to the

 

appliance or property.

IMPORTANT

Indicates important information about the installation, use, and

 

care of the appliance.

WARNING

The appliance should be destined only to the use for which it has been expressly conceived. Any other use should be considered improper and therefore dangerous. The manufacturer cannot be held responsible for injury or damage resulting

from improper, incorrect, and unreasonable use. Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions including the following:

•Only qualified service technicians should install and service the appliance.

•The appliance must be installed in accordance with applicable national, state, and local codes and regulations.

•Electrical connection must be hard-wired and must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or damage.

•The icemaker requires an independent power supply of proper capacity. See the nameplate for electrical specifications. Failure to use an independent power supply of proper capacity can result in a tripped breaker, blown fuse, damage to existing wiring, or component failure. This could lead to heat generation or fire.

•THE ICEMAKER MUST BE GROUNDED. Failure to properly ground the icemaker could result in death or serious injury.

•To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands.

•Move the control switch to the "OFF" position and turn off the power supply before servicing. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

•Do not make any alterations to the appliance. Alterations could result in electric shock, serious injury, fire, or damage.

•The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents KML-631MAH, MWH, MRH Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates a situation which could result in damage to Appliance or propertyAdditional Warning for Remote Models KML-250MH Specifications Electrical and Refrigerant DataKML-351MH KML-451MH KML-631MHDimensions/Connections Air-Cooled Models MAH Units mmWater-Cooled Models MWH Units mmRemote Models MRH Remote Condenser Unit URC-9F use with KML-631MRH Checks Before Installation II. Installation and Operating InstructionsLocation How to Remove Panels See Fig Setup Dispenser Unit/Ice Storage Bin and Icemaker SetupIntentionally Left Blank For All Models Electrical ConnectionAdditional Warnings for Remote Models  WARNING Water Supply and Drain Connections See Figs through Air-Cooled and Remote Models IcemakerWater-Cooled Models Connection to an Open Drain SystemWater-Cooled Models Connection to a Closed Loop System Water-Cooled Models Model Shown KML-631MWH Installation of Remote Condenser Unit LocationSetup Checks Before InstallationLine Set Size and Refrigerant Charge Line Set Installation Factory Line Set InstallationField Fabricated Line Set Installation Do not USE Thread Sealant Electrical Connection Stacking Remote Condenser Unit Final Checklist Startup Additional Notice for Remote ModelsIII. Maintenance Maintenance ScheduleCleaning and Sanitizing Instructions Cleaning ProcedureSanitizing Procedure Following Cleaning Procedure Page Remove the water from the icemaker water supply line IV. Preparing the Icemaker for Periods of Non-UseDrain the water tank Page Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 28 pages 29.45 Kb Manual 94 pages 41.69 Kb

MWH KML-351MAH, KML-250MAH, MWH KML-631MAH, MWH, MRH specifications

The Hoshizaki KML-250MAH is a premium ice maker renowned for its innovative design and advanced technology, catering to the high-demand needs of commercial establishments. This model combines efficiency, reliability, and superior performance, making it an excellent choice for restaurants, bars, and hotels.

One of the standout features of the KML-250MAH is its high production capacity. This ice maker can produce up to an impressive 265 pounds of crescent ice daily, ensuring your establishment has a consistent supply of ice for beverages and food preservation. The crescent-shaped ice not only allows for optimal cooling but also enhances presentation, making it suitable for a variety of applications.

The KML-250MAH incorporates advanced technologies to promote efficient operation. The unit uses an air-cooled refrigeration system, which ensures better energy efficiency while reducing operational costs. The machine is designed with a dual condensing fan that effectively optimizes airflow, thereby ensuring consistent ice production in different ambient temperatures, which is crucial in varying commercial kitchen environments.

The durability of this model is another key characteristic. Constructed with stainless steel, the KML-250MAH is built to withstand the rigors of daily commercial use while resisting rust and corrosion. The heavy-duty components used in this ice maker enhance its longevity, making it a smart investment for any business.

In addition, the KML-250MAH is designed with user-friendly features, including a built-in cleaning cycle that simplifies maintenance and ensures hygiene. Its ergonomic control panel provides users with easy access to settings and operational status, enhancing the overall user experience.

Another noteworthy aspect of the Hoshizaki KML-250MAH is its reduced water consumption. This ice maker operates using significantly less water compared to competitors, contributing to a lower environmental impact and cost savings over time.

To sum up, the Hoshizaki KML-250MAH stands out with its high production capacity, robust stainless steel construction, efficient air-cooled technology, user-friendly operation, and eco-conscious design. These features make it an ideal choice for businesses seeking a reliable and high-performing ice-making solution that meets the demands of a bustling commercial environment.
Top Page Image Contents