Hoshizaki MWH KML-351MAH, MWH KML-451MAH, MRH, MWH KML-631MAH Additional Warning for Remote Models

Page 5

WARNING, continued

•Children should be properly supervised around the appliance.

•Do not climb, stand, or hang on the appliance or allow children or animals to do so.

Serious injury could occur or the appliance could be damaged.

•Do not use combustible spray or place volatile or flammable substances near the appliance. They might catch fire.

•Keep the area around the appliance clean. Dirt, dust, or insects in the appliance could cause harm to individuals or damage to the appliance.

Additional Warning for Remote Models

•THE REMOTE CONDENSER UNIT MUST BE GROUNDED. The power supply and ground connection to the remote condenser unit are supplied from the icemaker. Failure to properly ground the remote condenser unit could result in death or serious injury.

•Wire routing (conduit) and disconnect (if required) must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or damage.

NOTICE

•Follow the water supply, drain connection, and maintenance instructions carefully to reduce the risk of costly water damage.

•In areas where water damage is a concern, install in a contained area with a floor drain.

•Install the icemaker in a location that stays above freezing. Normal operating ambient temperature must be within 45°F to 100°F (7°C to 38°C).

•Do not leave the icemaker on during extended periods of non-use, extended absences, or in sub-freezing temperatures. To properly prepare the icemaker for these occasions, follow the instructions in "IV. Preparing the Icemaker for Periods of Non-Use."

•Do not place objects on top of the appliance.

•The dispenser unit/ice storage bin is for ice use only. Do not store anything else in the dispenser unit/ice storage bin.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents KML-631MAH, MWH, MRH Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates a situation which could result in damage to Appliance or propertyAdditional Warning for Remote Models KML-351MH Specifications Electrical and Refrigerant DataKML-250MH KML-631MH KML-451MHAir-Cooled Models MAH Units mm Dimensions/ConnectionsUnits mm Water-Cooled Models MWHRemote Models MRH Remote Condenser Unit URC-9F use with KML-631MRH Location II. Installation and Operating InstructionsChecks Before Installation How to Remove Panels See Fig Dispenser Unit/Ice Storage Bin and Icemaker Setup SetupIntentionally Left Blank Additional Warnings for Remote Models Electrical ConnectionFor All Models  WARNING Water Supply and Drain Connections See Figs through Icemaker Air-Cooled and Remote ModelsConnection to an Open Drain System Water-Cooled ModelsWater-Cooled Models Connection to a Closed Loop System Water-Cooled Models Model Shown KML-631MWH Location Installation of Remote Condenser UnitLine Set Size and Refrigerant Charge Checks Before InstallationSetup Factory Line Set Installation Line Set InstallationField Fabricated Line Set Installation Do not USE Thread Sealant Electrical Connection Stacking Remote Condenser Unit Final Checklist Additional Notice for Remote Models StartupMaintenance Schedule III. MaintenanceCleaning Procedure Cleaning and Sanitizing InstructionsSanitizing Procedure Following Cleaning Procedure Page Drain the water tank IV. Preparing the Icemaker for Periods of Non-UseRemove the water from the icemaker water supply line Page Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 28 pages 29.45 Kb Manual 94 pages 41.69 Kb

MWH KML-351MAH, KML-250MAH, MWH KML-631MAH, MWH, MRH specifications

The Hoshizaki KML-250MAH is a premium ice maker renowned for its innovative design and advanced technology, catering to the high-demand needs of commercial establishments. This model combines efficiency, reliability, and superior performance, making it an excellent choice for restaurants, bars, and hotels.

One of the standout features of the KML-250MAH is its high production capacity. This ice maker can produce up to an impressive 265 pounds of crescent ice daily, ensuring your establishment has a consistent supply of ice for beverages and food preservation. The crescent-shaped ice not only allows for optimal cooling but also enhances presentation, making it suitable for a variety of applications.

The KML-250MAH incorporates advanced technologies to promote efficient operation. The unit uses an air-cooled refrigeration system, which ensures better energy efficiency while reducing operational costs. The machine is designed with a dual condensing fan that effectively optimizes airflow, thereby ensuring consistent ice production in different ambient temperatures, which is crucial in varying commercial kitchen environments.

The durability of this model is another key characteristic. Constructed with stainless steel, the KML-250MAH is built to withstand the rigors of daily commercial use while resisting rust and corrosion. The heavy-duty components used in this ice maker enhance its longevity, making it a smart investment for any business.

In addition, the KML-250MAH is designed with user-friendly features, including a built-in cleaning cycle that simplifies maintenance and ensures hygiene. Its ergonomic control panel provides users with easy access to settings and operational status, enhancing the overall user experience.

Another noteworthy aspect of the Hoshizaki KML-250MAH is its reduced water consumption. This ice maker operates using significantly less water compared to competitors, contributing to a lower environmental impact and cost savings over time.

To sum up, the Hoshizaki KML-250MAH stands out with its high production capacity, robust stainless steel construction, efficient air-cooled technology, user-friendly operation, and eco-conscious design. These features make it an ideal choice for businesses seeking a reliable and high-performing ice-making solution that meets the demands of a bustling commercial environment.
Top Page Image Contents