Hoshizaki F-450MAH-C service manual Removal and Replacement of Fan Motor

Page 42

23)When replacing the evaporator:

(a)Braze the new evaporator with nitrogen gas flowing at the pressure of 3-4 PSIG.

(b)Replace the drier.

(c)Check for leaks using nitrogen gas (140 PSIG) and soap bubbles.

(d)Evacuate the system. Charge it with refrigerant. See the nameplate for required refrigerant charge and type.

24)Replace the panels in their correct position.

25)Plug in the icemaker.

7.Removal and Replacement of Fan Motor

1)Unplug the icemaker.

2)Remove the panels.

3)Remove the wire connectors from the fan motor leads.

4)Remove the fan motor bracket and fan motor.

5)Install the new fan motor.

6)Replace the fan motor bracket and the wire connectors.

7)Replace the panels in their correct position

8)Plug in the icemaker.

8.Removal and Replacement of Control Water Valve

1)Unplug the icemaker.

2)Remove the panels.

3)Close the water supply line shut-off valve.

4)Disconnect the terminal from the control water valve.

5)Loosen the fitting nut on the control water valve Inlets, and remove the control water valve. Do not lose the packings inside the fitting nut.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Modular Flaker Models 450MAH-C Hoshizaki AMERICA, INC Contents Specifications 1. F-450MAH Water TEMP. F450MAH-C II. General Information Construction Control Box Layout Timer Board Timer BoardSolid-State Control Sequence Part Code Page Page Wiring Diagram 450MAH450MAH-C Sequence of Electrical Circuit Page Compressor starts about 60 sec. after gear motor starts Page Low water except water-cooled model Page Page Page Page Page Timing Chart Gear Motor Relay OFF FAN Motor Flush ICE OFF Upper Lower Bottom Performance Data ICE Production883 891 898 IV. Service Diagnosis No Ice Production Problem Possible Cause Remedy Problem Possible Cause Remedy Low Ice Production Other Refrigerant Recovery Removal and Replacement of ComponentsService for Refrigerant Lines Evacuation and Recharge R-404ABrazing Removal and Replacement of Compressor Removal and Replacement of Drier Removal and Replacement of Expansion Valve Extruding Head Removal and Replacement of Evaporator AssemblyCutter AugerBearing-Lower and Mechanical Seal Gear MotorRemoval and Replacement of Fan Motor Removal and Replacement of Control Water ValveRemoval and Replacement of Flush Water Valve VI. Cleaning and Maintenance Preparing the Icemaker for Long StorageCleaning and Sanitizing Instructions Cleaning SolutionCleaning Procedure Sanitizing Solution Sanitizing Procedure InitialSanitizing Procedure Final Page Maintenance Instructions

F-450MAH-C, F-450MAH specifications

Hoshizaki F-450MAH and F-450MAH-C are advanced ice machine models designed for commercial use, ensuring high efficiency and reliability in providing ice for a variety of foodservice and hospitality applications. These models are recognized for their streamlined operation and innovative technology, making them a preferred choice for many establishments.

One of the standout features of the Hoshizaki F-450MAH is its impressive ice production capacity. The machine can produce up to 525 pounds of crescent cube ice daily, meeting the high demands of busy restaurants, bars, hotels, and catering services. The ice produced is not only uniform in size but is also perfect for mixed drinks, chilling beverages, and food display applications.

The F-450MAH and its counterpart, the F-450MAH-C, are equipped with an advanced water-cooled condenser, optimizing performance even in challenging environments. This technology allows the machines to operate efficiently, minimizing energy consumption and enhancing overall performance. Additionally, these models feature a self-cleaning function that reduces maintenance time and improves hygiene by automatically flushing water lines and purging scale buildup.

Hoshizaki prioritizes durability and reliability in its designs, and the F-450MAH is no exception. The machine is constructed from high-quality stainless steel, ensuring resistance to corrosion and easy cleaning. Furthermore, the interior of the ice bin is designed to be easy to access, allowing quick retrieval of ice while maintaining optimal hygiene standards.

In terms of usability, the F-450MAH and F-450MAH-C come with a user-friendly digital control panel that provides real-time information on ice production and machine status. Operators can easily monitor performance and make adjustments as necessary, enhancing operational efficiency.

The Hoshizaki F-450MAH-C variant is tailored for those in need of a modular unit. It is designed to be stacked with compatible storage bins or dispensers, offering flexibility in installation and ice storage solutions. This modularity allows businesses to customize their ice-making operations according to specific needs while maximizing space.

In summary, the Hoshizaki F-450MAH and F-450MAH-C are exceptional ice machines that combine high production capacity, advanced technologies, and robust construction. These models offer an excellent solution for businesses in the foodservice industry, ensuring a consistent supply of high-quality ice while reducing operational costs and maintenance efforts. With their reliable performance and user-friendly features, they are regarded as a top choice in the commercial ice machine market.
Top Page Image Contents