Connect the speaker cables.
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
Insert the wire fully. r: White s: Blue line
Push
Pull the cable straight along the line and slide into the groove.
≥ Be sure to place the cable under the projecting part.
Back of the base
Press into the groove.
Speaker fall prevention measures
To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter “cord”).
≥Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (> 11, 12). Improper attachment may result in damage to the wall and speakers, and personal injury.
≥Use a cord of less then ‰2.0 mm, which is capable of supporting over 10 kg.
≥Keep the screws out of reach of children to prevent swallowing.
≥Make sure that the slack of the cord is minimal.
When placing the speakers on a wall
Horizontal placement
Vertical placement
16 | A | Cord (not supplied) | C | Wall |
B | Screw eye (not supplied) | D | TV |
VQT3R83