Sound
No sound (or image).
≥Turn muting off. (> 22)
≥Check the connections to the other devices. (> 18 to 20)
≥Make sure that the received audio signal is compatible with this system. (> 6)
≥Turn this system off and then on again.
≥If this system is connected to the TV with only an HDMI cable, make sure that the TV’s HDMI terminal is labelled “HDMI (ARC)”. If not, connect using the optical digital audio cable. (> 18, 19)
≥If this system is connected to a Panasonic TV and turned on using the button on the active subwoofer or the remote control, sound might not be output from this system. In this case, turn this system on using the TV’s remote control. (> 24)
≥If the connections are correct, there might be a problem with the cables. Redo the connections with different cables.
≥Check the audio output settings on the connected device.
≥If the HDMI 2 indicator flashes and there is no audio output, try the following.
1 Turn the connected device off and then on.
2 Turn off this system, remove the HDMI cable, then reconnect the HDMI cable and turn this system back on.
The dual audio cannot be changed from main to secondary.
If the audio received from the connected device is not “Dolby Dual Mono” or the output setting is not “Bitstream”, the setting cannot be changed from this system. Change the setting on the connected device.
The volume is lowered when this system is turned on.
If this system is turned off with the volume setting in the greater half (above 50), this system will automatically lower the volume to the middle (50) when this system is turned on. (> 25)
The dialog is too persistent or the dialog does not sound natural.
This system has a function to make the dialog stand out when the volume is low. (> 25)
There is no audio.
This system turns off automatically.
(When this system detects a problem, a safety measure is activated and this system automatically switches to standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high? If so, lower the volume.
≥Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait
a few moments and then try to turn it on again. If the problem persists, confirm the TV indicator and HDMI 2 indicator blink, turn the system off, remove the AC mains lead and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer.
Reference
27
VQT3R83
