Henny Penny 500, 600 manual OIL Data current batch resets by Clean-Out Mode

Model 500/600

5-4. INFORMATION MODE	8. OIL DATA (current batch; resets by Clean-Out Mode)
DETAILS	Press to step through the following data:
	FUNCTION	DISPLAYEX:
	The day current batch of oil was started	8A. SINCE APR-1
	Number of days with data included in totals	8B. DAYS CNT		10
	Number of monitored heat-ups	8C. HEAT-UPS		75
	Number of slow heat-ups	8D.	SLOW HT’S	2
	Max time to heat 270°F to 310°F	8E. MAX HT TM 3:25
	Lowest peak rate of all heat-ups	8F. MIN RATE 0.43
	Maximum voltage	8G. MAX VOLT 102%
	Minimum voltage	8H. MIN VOLT		91%
	No. of “LOW VOLTAGE” warnings	8I. LO VOLT’S		0
	Maximum amp draw	8J. MAX AMPS		35
	Minimum amp draw	8K.	MIN AMPS	32
	No. of “LOW AMPS” warnings	8L. LO AMP’S		0
	Non-cooking time (hrs) while fryer was on	8M. IDLE HRS		43
	Total oil wear accumulated	8N.	TOT WEAR	278
	Total number of Cook Cycles	8O.	TOT CK’S	125
	Number of cycles started before ready	8P. NOT RDY’S		7
	No. cycles quit early (0:11 or more remaining)	8Q.	QUIT 11+	1
	No. cycles beeped *DONE* 21 sec or more	8R. DONE 21+		3
	Individual product cook counts	8S. Px CK CT		77
	Individual product not detected counts	8T. Px NO DET		3
	Individual product slow cook counts	8U.	Px SLO CT	0
	Individual product frozen or overloaded	8V. Px FRZ/OV		1

During steps 8S through 8V, press the product buttons (or

Manual Prog) to see data on individual product items.

Press to continue onto prev oil data log.

303 5-31