Henny Penny 290 manual Shortening FOAMING/DRAINING Section

Page 8

Model 290

Problem

Cause

Correction

SHORTENING FOAMING/DRAINING SECTION

Foaming or boiling over of shortening

Shorteningwill

not drain from frypot

Shortening leaking through drain valve

• Water in shortening

• At end of a Cook Cycle,

 

drain shortening and clean

 

frypot; add fresh shortening

• Condensation line stopped up

• Remove and clean condensation

 

line

• Improper or bad

• Use recommended

shortening

shortening

• Improper filtering

• Refer to the procedure

 

covering filtering the shortening

• Cold zone full of cracklings

• Filter shortening

• Improper rinsing after

• Clean and neutralize the

cleaning the fryer

frypot; rinse with vinegar

 

to remove the alkaline, then

 

rinse with hot water and

 

dry frypot

 

 

• Drain valve clogged with

• Open valve - push cleaning

crumbs

rod through drain opening from

 

inside of frypot

• Obstruction in drain

• Remove obstruction

• Faulty drain valve

• Replace drain valve

1103

1-8

Image 8
Contents Troubleshooting SafetyIntroduction Hazardous Situation WHICH, if notTo isolate a malfunction, proceed as follows Cooking Section Problem Cause Correction Cooking Section 103 Power Section Heating of Shortening SectionProblem Cause Correction Heating of Shortening Section Shortening FOAMING/DRAINING Section Error Codes Display Cause Panel Board CorrectionDisplay Cause Panel Board Correction

290 specifications

The Henny Penny 290 is a high-performance pressure fryer that has set a new standard in the commercial kitchen industry. Designed for operators seeking efficiency and reliability, the Henny Penny 290 combines advanced technology with user-friendly features, making it an indispensable tool for restaurants, catering services, and fast-food establishments.

One of the standout characteristics of the Henny Penny 290 is its robust construction. Built with durable stainless steel, the fryer is designed to withstand the rigors of a busy kitchen environment. This not only ensures longevity but also makes the unit easy to clean and maintain. The fryer is equipped with an advanced insulation system that minimizes heat loss and maximizes energy efficiency, resulting in significant cost savings over time.

The 290 model incorporates innovative cooking technology that allows for precise temperature control and consistent cooking results. The automated pressure cooking process locks in moisture and flavor, ensuring that fried foods are crispy on the outside while remaining juicy on the inside. The fryer is also capable of cooking a variety of foods, including chicken, fish, and vegetables, making it a versatile addition to any menu.

Another notable feature of the Henny Penny 290 is its intuitive digital control panel. This user-friendly interface provides real-time feedback on cooking conditions, allowing operators to monitor and adjust settings with ease. The fryer also includes programmable cooking cycles, allowing for consistent results and reducing the potential for human error during busy service times.

Safety is a top priority with the Henny Penny 290. The fryer is equipped with multiple safety mechanisms, including a pressure relief valve and an automatic shut-off feature, ensuring safe operation even during high-pressure cooking. Additionally, the ergonomic design of the fryer minimizes the risk of accidents, allowing staff to operate it comfortably and safely.

In conclusion, the Henny Penny 290 pressure fryer stands out in the competitive landscape of commercial kitchen equipment. Its combination of durability, advanced cooking technology, user-friendly controls, and safety features makes it a top choice for operators looking to elevate their frying capabilities. With the Henny Penny 290, achieving delicious, perfectly cooked fried foods has never been easier or more efficient.