Henny Penny 290 manual To isolate a malfunction, proceed as follows

Page 2

		Model 290
1-3. TROUBLESHOOTING	To isolate a malfunction, proceed as follows:
	1.	Clearly define the problem (or symptom) and when it
		occurs.
	2.	Locate the problem in the Troubleshooting table.
	3.	Review all possible causes. Then, one-at-a-time work
		through the list of corrections until the problem is solved.
	4.	Refer to the maintenance procedures in the Maintenance
		Section to safely and properly make the checkout and re-
		pair needed.

If maintenance procedures are not followed correctly, injuries and/or property damage could result.

1103

1-2

Image 2

Contents

Introduction TroubleshootingSafety Hazardous Situation WHICH, if notTo isolate a malfunction, proceed as follows Cooking Section Problem Cause Correction Cooking Section 103 Power Section Heating of Shortening SectionProblem Cause Correction Heating of Shortening Section Shortening FOAMING/DRAINING Section Error Codes Display Cause Panel Board CorrectionDisplay Cause Panel Board Correction