Hoshizaki C-101BAH-ADDS Important Safety Information, Serious injury, Appliance or property

Page 4

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, damage to the appliance, or damage to property.

WARNING

Indicates a hazardous situation which could result in death or

 

serious injury.

NOTICE

Indicates a situation which could result in damage to the

 

appliance or property.

IMPORTANT

Indicates important information about the installation, use, and

 

care of the appliance.

 

WARNING

The appliance should be destined only to the use for which it has been expressly conceived. Any other use should be considered improper and therefore dangerous. The manufacturer cannot be held responsible for injury or damage resulting from improper, incorrect, and unreasonable use. Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions including the following:

•Only qualified service technicians should install and service the appliance.

•The appliance must be installed in accordance with applicable national, state, and local codes and regulations.

•The appliance requires an independent power supply of proper capacity. See the nameplate for electrical specifications. Failure to use an independent power supply of proper capacity can result in a tripped breaker, blown fuse, damage to existing wiring, or component failure. This could lead to heat generation or fire.

•THE APPLIANCE MUST BE GROUNDED: The appliance is equipped with a

NEMA 5-15 three‑prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent 3-prong wall outlet. If the outlet is a 2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong wall outlet. Do not remove the ground prong from the power cord and do not use an adapter plug. Failure to properly ground the appliance could result in death or serious injury.

•Do not use an extension cord.

•To reduce the risk of electric shock, do not touch the control switch or plug with damp hands. Make sure the control switch is in the "OFF" position before plugging in or unplugging the appliance.

•Do not use an appliance with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the appliance, be sure to pull the plug, not the cord, and do not jerk the cord.

•Do not make any alterations to the appliance. Alterations could result in electric shock, injury, fire, or damage to the appliance.

•Do not place fingers or any other objects into the ice discharge opening.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 101BAH-DS 101BAH-AD 101BAH-ADDS Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates a situation which could result in damage to Appliance or propertyPage Specifications Construction Electrical and Refrigerant DataDimensions/Connections 101BAH101BAH-DS 101BAH-AD 101BAH-ADDS II. Installation Instructions Checks Before InstallationLocation GeneralBuilt-In Installation Site Between Two Cabinets Between a Cabinet The End of a CounterBetween a Cabinet and a Wall or Tall Cabinet A CornerDoor 101BAH, C-101BAH-ADTop Panel Screws Hinge B Notch Filler 101BAH-DS, C-101BAH-ADDS PartsOverlay Panel Specification 101BAH-DS Overlay Panel Specification101BAH-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Setup Electrical ConnectionWater Supply and Drain Connections Minimum 1/4 Nominal ID Copper Water Tubing or Equivalent Final Checklist III. Operating Instructions Important Notes About Usage Page Startup IV. Maintenance Maintenance Schedule Frequency Area TaskCleaning Solution Cleaning and Sanitizing InstructionsCleaning Procedure Sanitizing Solution Sanitizing Procedure InitialSanitizing Procedure Final Storage Bin DrainCondenser Optional Drain Pump HS-5061 Preparing the Appliance for Periods of Non-Use Page VI. Disposal Hoshizaki AMERICA, INC

C-101BAH, C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS specifications

Hoshizaki is renowned for its high-quality ice-making machines, and the C-101BAH series is no exception. This series includes models such as the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, each designed to meet the varying needs of commercial kitchens, bars, and establishments requiring reliable ice production. The primary focus of these units is to provide efficient, sanitary, and quality ice.

One of the standout features of the Hoshizaki C-101BAH series is its innovative cube ice production technology. These machines are designed to produce crescent-shaped ice cubes, known for their durability and slow melting characteristics. This is highly beneficial for businesses that want to maintain the temperature of beverages, enhancing the customer experience. The ice produced is crystal-clear and free of impurities, thanks to the advanced purification systems employed in the machinery.

A hallmark of the C-101BAH series is its energy efficiency, making it an environmentally friendly choice for ice production. Hoshizaki integrates state-of-the-art technology that minimizes energy consumption while maximizing ice output. This is crucial for restaurants and bars looking to reduce overhead costs without compromising on service quality.

Additionally, the C-101BAH models boast robust construction and durability. Made from high-quality stainless steel, they resist corrosion and are easy to clean, ensuring longevity and hygiene in any working environment. The compact design of these machines allows for flexible installation in various spaces, making them suitable for countertops or under-counter applications.

Moreover, Hoshizaki machines are designed with user-friendly controls featuring intuitive digital displays that make operation and troubleshooting straightforward. Maintenance is also simplified due to accessible components, enabling quicker servicing and reduced downtime.

In summary, the Hoshizaki C-101BAH series, including the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, exemplifies the brand's commitment to innovation and quality. These ice machines stand out for their efficient ice production, energy-saving technologies, durable construction, and ease of use and maintenance, making them a top choice for commercial establishments demanding reliability and high performance in ice-making solutions.
Top Page Image Contents