Hoshizaki C-101BAH-ADDS, C-101BAH-DS instruction manual Setup, Electrical Connection

Page 23

D.Setup

1)Position the appliance in the selected permanent location.

2)Level the appliance from side-to-side and front-to-rear by adjusting the feet.

E.Electrical Connection

WARNING

•Electrical connection must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or damage.

•The appliance requires an independent power supply of proper capacity. See the nameplate for electrical specifications. Failure to use an independent power supply of proper capacity can result in a tripped breaker, blown fuse, damage to existing wiring, or component failure. This could lead to heat generation or fire.

•THE APPLIANCE MUST BE GROUNDED: The appliance is equipped with a NEMA 5-15 three‑prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent 3-prong wall outlet. If the outlet is a 2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong wall outlet. Do not remove the ground prong from the power cord and do not use an adapter plug. Failure to properly ground the appliance could result in death or serious injury.

•Do not use an extension cord.

•To reduce the risk of electric shock, do not touch the control switch or plug

with damp hands. Make sure the control switch is in the "OFF" position before plugging in or unplugging the appliance.

•Do not use an appliance with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the appliance, be sure to pull the plug, not the cord, and do not jerk the cord.

•The GREEN ground wire in the factory-installed power cord is connected to the appliance. If it becomes necessary to remove or replace the power cord, be sure to connect the power cord's ground wire to this screw upon reattachment.

•Usually an electrical permit and services of a licensed electrician are required.

•The maximum allowable voltage variation is ±10 percent of the nameplate rating.

•For optional drain pump (HS-5061) installation, refer to the instructions included with the pump.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 101BAH-DS 101BAH-AD 101BAH-ADDS Hoshizaki AMERICA, INC Contents Appliance or property Important Safety InformationSerious injury Indicates a situation which could result in damage toPage Electrical and Refrigerant Data Specifications Construction101BAH Dimensions/Connections101BAH-DS 101BAH-AD 101BAH-ADDS General II. Installation InstructionsChecks Before Installation LocationA Corner Built-In Installation SiteBetween Two Cabinets Between a Cabinet The End of a Counter Between a Cabinet and a Wall or Tall Cabinet101BAH, C-101BAH-AD DoorTop Panel Screws Hinge B Notch Filler Parts 101BAH-DS, C-101BAH-ADDS101BAH-DS Overlay Panel Specification Overlay Panel Specification101BAH-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Electrical Connection SetupWater Supply and Drain Connections Minimum 1/4 Nominal ID Copper Water Tubing or Equivalent Final Checklist III. Operating Instructions Important Notes About Usage Page Startup IV. Maintenance Frequency Area Task Maintenance ScheduleCleaning Procedure Cleaning and Sanitizing InstructionsCleaning Solution Sanitizing Procedure Initial Sanitizing SolutionStorage Bin Drain Sanitizing Procedure FinalCondenser Optional Drain Pump HS-5061 Preparing the Appliance for Periods of Non-Use Page VI. Disposal Hoshizaki AMERICA, INC

C-101BAH, C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS specifications

Hoshizaki is renowned for its high-quality ice-making machines, and the C-101BAH series is no exception. This series includes models such as the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, each designed to meet the varying needs of commercial kitchens, bars, and establishments requiring reliable ice production. The primary focus of these units is to provide efficient, sanitary, and quality ice.

One of the standout features of the Hoshizaki C-101BAH series is its innovative cube ice production technology. These machines are designed to produce crescent-shaped ice cubes, known for their durability and slow melting characteristics. This is highly beneficial for businesses that want to maintain the temperature of beverages, enhancing the customer experience. The ice produced is crystal-clear and free of impurities, thanks to the advanced purification systems employed in the machinery.

A hallmark of the C-101BAH series is its energy efficiency, making it an environmentally friendly choice for ice production. Hoshizaki integrates state-of-the-art technology that minimizes energy consumption while maximizing ice output. This is crucial for restaurants and bars looking to reduce overhead costs without compromising on service quality.

Additionally, the C-101BAH models boast robust construction and durability. Made from high-quality stainless steel, they resist corrosion and are easy to clean, ensuring longevity and hygiene in any working environment. The compact design of these machines allows for flexible installation in various spaces, making them suitable for countertops or under-counter applications.

Moreover, Hoshizaki machines are designed with user-friendly controls featuring intuitive digital displays that make operation and troubleshooting straightforward. Maintenance is also simplified due to accessible components, enabling quicker servicing and reduced downtime.

In summary, the Hoshizaki C-101BAH series, including the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, exemplifies the brand's commitment to innovation and quality. These ice machines stand out for their efficient ice production, energy-saving technologies, durable construction, and ease of use and maintenance, making them a top choice for commercial establishments demanding reliability and high performance in ice-making solutions.
Top Page Image Contents