Hoshizaki C-101BAH-DS, C-101BAH-ADDS Minimum 1/4 Nominal ID Copper Water Tubing or Equivalent

Page 25

•For gravity drain installation, drain must have 1/4" fall per foot (2 cm per 1 m) on horizontal runs to get good flow. A vented tee connection is also required for proper flow. Extend the vent at least 12" (30 cm) above the drain outlet.

•For optional drain pump installation, refer to the instructions included with the pump.

 

Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent

Water Supply Inlet

Be sure there is sufficient extra

1/2" FPT

 

 

water supply line and drain line

 

 

 

 

for the appliance to be pulled

 

 

out for service.

 

Shut-Off Valve

Piping to approved drain.

 

 

 

 

Leave a 2‑inch (5-cm) vertical

 

 

air gap between the end of the

 

Drain Valve

pipe and the drain.

 

 

Drain Outlet

 

1/2" FPT

2-inch (5-cm)

 

Vented Tee Connection

air gap

 

Extend the vent at least 12"

 

 

(30 cm) above the drain outlet.

 

Minimum 1/2" Nominal ID Hard Pipe

Fig. 30

DrainFloor

or Equivalent

 

 

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 101BAH-DS 101BAH-AD 101BAH-ADDS Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates a situation which could result in damage to Appliance or propertyPage Electrical and Refrigerant Data Specifications Construction101BAH Dimensions/Connections101BAH-DS 101BAH-AD 101BAH-ADDS Checks Before Installation II. Installation InstructionsLocation GeneralBetween Two Cabinets Between a Cabinet The End of a Counter Built-In Installation SiteBetween a Cabinet and a Wall or Tall Cabinet A Corner101BAH, C-101BAH-AD DoorTop Panel Screws Hinge B Notch Filler Parts 101BAH-DS, C-101BAH-ADDS101BAH-DS Overlay Panel Specification Overlay Panel Specification101BAH-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Electrical Connection SetupWater Supply and Drain Connections Minimum 1/4 Nominal ID Copper Water Tubing or Equivalent Final Checklist III. Operating Instructions Important Notes About Usage Page Startup IV. Maintenance Frequency Area Task Maintenance ScheduleCleaning Solution Cleaning and Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Initial Sanitizing SolutionStorage Bin Drain Sanitizing Procedure FinalCondenser Optional Drain Pump HS-5061 Preparing the Appliance for Periods of Non-Use Page VI. Disposal Hoshizaki AMERICA, INC

C-101BAH, C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS specifications

Hoshizaki is renowned for its high-quality ice-making machines, and the C-101BAH series is no exception. This series includes models such as the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, each designed to meet the varying needs of commercial kitchens, bars, and establishments requiring reliable ice production. The primary focus of these units is to provide efficient, sanitary, and quality ice.

One of the standout features of the Hoshizaki C-101BAH series is its innovative cube ice production technology. These machines are designed to produce crescent-shaped ice cubes, known for their durability and slow melting characteristics. This is highly beneficial for businesses that want to maintain the temperature of beverages, enhancing the customer experience. The ice produced is crystal-clear and free of impurities, thanks to the advanced purification systems employed in the machinery.

A hallmark of the C-101BAH series is its energy efficiency, making it an environmentally friendly choice for ice production. Hoshizaki integrates state-of-the-art technology that minimizes energy consumption while maximizing ice output. This is crucial for restaurants and bars looking to reduce overhead costs without compromising on service quality.

Additionally, the C-101BAH models boast robust construction and durability. Made from high-quality stainless steel, they resist corrosion and are easy to clean, ensuring longevity and hygiene in any working environment. The compact design of these machines allows for flexible installation in various spaces, making them suitable for countertops or under-counter applications.

Moreover, Hoshizaki machines are designed with user-friendly controls featuring intuitive digital displays that make operation and troubleshooting straightforward. Maintenance is also simplified due to accessible components, enabling quicker servicing and reduced downtime.

In summary, the Hoshizaki C-101BAH series, including the C-101BAH-AD, C-101BAH-DS, C-101BAH-ADDS, and C-101BAH, exemplifies the brand's commitment to innovation and quality. These ice machines stand out for their efficient ice production, energy-saving technologies, durable construction, and ease of use and maintenance, making them a top choice for commercial establishments demanding reliability and high performance in ice-making solutions.
Top Page Image Contents