Hoshizaki KM-61BAH, KM-101BAH, KM-151BWH, KM-151BAH instruction manual How to Remove Panels See Fig

Page 9

II.Installation and Operating Instructions A. Checks Before Installation

*Visually inspect the exterior of the shipping container, and any severe damage noted should be reported to the carrier.

IMPORTANT

1.Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will not work properly.

2.Ensure all components, fasteners and thumbscrews are securely in place.

3.Remove the shipping tapes holding the Door and Separator. See Fig. 1.

1)Remove the panels to prevent damage when installing the icemaker. (See “B. How to Remove Panels”.)

2)Remove the package containing accessories.

3)Remove the protective plastic film from the panels. If the icemaker is exposed to the sun or to heat, remove the film after the icemaker cools.

4)Check that refrigerant lines do not rub or touch lines or other surfaces, and that the fan blade turns freely.

5)Check that the Compressor is snug on all mounting pads.

6)See the Nameplate on the upper part of the Left Side Panel, and check that your voltage supplied corresponds with the voltage specified on the Nameplate.

B. How to Remove Panels - See Fig. 1

* Louver:

Remove the Air Filter. Lift it up and towards you.

 

Push down snap tabs at the top on both sides by a flat head screwdriver,

 

pull towards you slightly, and lift off.

* Top Panel:

Remove the screws. Slide rearward, and lift off.

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents KM-61BAH KM-101BAH KM-151BAH KM-151BWH Hoshizaki AMERICA, INC Contents KM-151BWH Specifications Nameplate RatingKM-61BAH Dimensions/ConnectionsKM-101BAH KM-151BAH KM-151BWH How to Remove Panels See Fig Location Electrical Connection Set UpWater Supply and Drain Connections See Fig Drain Outlet 3/4 FPT Water Supply Inlet 1/2 FPT Bin Drain Outlet Condenser Water FPT Outlet 1/2 FPT Final Checklist Place the Air Filter in its correct position StartupIII. Cleaning and Maintenance Instructions CleaningCleaning Procedure Pump Motor Bracket L Push Bracket R Snap Evaporator KM-61BAH Sanitizing Procedure Following Cleaning ProcedureMaintenance Exterior PanelsStorage Bin and Scoop Air Filter Preparing the Icemaker for Long StorageCondenser Remove the water from the potable water supply lineDrain the potable Water Tank

KM-151BAH, KM-151BWH, KM-61BAH, KM-101BAH specifications

The Hoshizaki KM series is renowned for its reliability and efficiency in producing high-quality ice. Among the popular models are the KM-61BAH, KM-151BWH, KM-101BAH, and KM-151BAH, each tailored to meet varying ice production needs in commercial settings.

The Hoshizaki KM-61BAH is a compact ice maker that boasts a production capacity of up to 60 pounds of crescent-shaped ice per day. It features a durable stainless-steel exterior that not only enhances its longevity but also ensures easy cleaning. The KM-61BAH is equipped with an advanced air-cooled condenser, which efficiently dissipates heat, resulting in optimal ice production even in warmer environments. The unit’s efficient water usage system minimizes waste, making it eco-friendly.

Moving on to the KM-151BWH, this model is designed for medium to large establishments requiring higher ice production. It can produce up to 150 pounds of ice daily and features an extensive bin capacity for storage. The KM-151BWH uses a unique Ice-Shape technology that creates crystal-clear, restaurant-quality ice, making it a favorite among bars and restaurants. The machine’s modular design allows for easy maintenance and adaptability to varying space requirements.

The KM-101BAH offers a balanced combination of size and capacity, producing up to 100 pounds of ice daily. Its sleek design and stainless-steel finish give it a professional look suitable for any commercial kitchen or bar. The unit incorporates Hoshizaki's advanced control system, which continually monitors the internal conditions and adjusts operations as needed, ensuring consistent ice quality and dependable performance.

Lastly, the KM-151BAH provides exceptional output, similar to the KM-151BWH, capable of producing up to 150 pounds of ice per day, but features an air-cooled system. The unit's energy-efficient operation lowers operational costs while maintaining high performance. The patented design helps in producing ice faster and more efficiently without compromising quality.

All models in the Hoshizaki KM line prioritize energy efficiency and consistent ice quality. They are equipped with features like cycle timers, easy-clean functions, and essential safety measures, making them suitable for demanding commercial environments. With their robust construction and innovative technologies, the Hoshizaki KM series ice makers stand out as reliable choices for businesses needing substantial ice supply.
Top Page Image Contents