Hoshizaki F-330BAH(-C) instruction manual Startup

Page 10

H. Startup

CAUTION

1.All parts are factory-adjusted. Improper adjustments may result in failure.

2.If the unit is turned off, wait for at least 3 minutes before restarting the icemaker to prevent damage to the compressor.

1)Clean the storage bin.

2)Open the water supply line shut-off valve.

3)Make sure the power switch on the control box is in the "OFF" position. Plug the unit into the electrical outlet.

4)Move the flush switch to the "ICE" position and move the power switch to the "ON" position to start the automatic icemaking process.

5)Replace the panels in their correct positions.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Self-Contained Flaker Model 330BAH-C Hoshizaki AMERICA, INC Contents Specifications Nameplate Rating 330BAH, F-330BAH-CDimensions/Connections How to Remove Panels See Fig Electrical Connection Setup Location Water Supply and Drain ConnectionsPage Final Checklist Startup Cleaning Solution Cleaning ProcedureLift up the top insulation and unsnap Sanitizing Procedure Initial Sanitizing SolutionSanitizing Procedure Final Flush switch to the ICE position Storage Bin and Scoop MaintenanceStainless Steel Exterior Air FiltersPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC
Top Page Image Contents