Hoshizaki DCM 300BAH(-OS) service manual Water Dispense Nozzle Ice Dispense Spout Spout Cover

Page 52

8)Remove the spout cover, ice dispense spout, and water dispense nozzle. See Fig. 7.

9)Immerse the agitator, dispense auger, and parts removed in steps 5 through 8 in the cleaning solution and then in the sanitizing solution for 15 minutes each. Rinse the parts thoroughly with clean water. On Opti-Serve models (-OS), wipe the optical sensors with cleaning solution and then with a clean, damp cloth.

10)Wipe the shutter located above the ice dispense spout thoroughly with a clean cloth.

11)Reassemble the bin control assembly and replace all parts in the reverse order of which they were removed.

12)Pour warm water into the storage bin and melt any remaining ice. Clean the storage bin liner and the storage bin cover using a neutral cleaner. Rinse thoroughly after cleaning. Replace the storage bin cover in its correct position.

13)Move the power switch to the "ON" position, then replace the panels in their correct positions. Turn on the power supply, then move the control switch to the "ICE" position to start the automatic icemaking process.

Water Dispense Nozzle

Ice Dispense Spout

Spout Cover

Fig. 7

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents DCM-300BAH-OS Hoshizaki AMERICA, INC Contents Page Important Safety Information Page Specifications Icemaker DCM-300BAH-OSII. General Information Construction IcemakerIcemaking Unit Sequence of Operation Sequence Cycles and ShutdownSequence Flow Chart Cycle StepsShutdown & Restart 12-Hr. Drain CycleControl Board Control Board Layout DCM-PB Push Button Model Control BoardControl Board K5 Connector DCM-OS Opti-Serve Model Control BoardPower Switch Power Switch, Control Switch, and Dispense Mode SwitchLED Lights and Components Control Switch Dispense Mode SwitchPage Wiring Diagrams DCM-300BAH-OS Performance Data Diagnostic Procedure IV. Service DiagnosisIce Production Check Page Page Page Page Control Board Check 5VDC Output ChecksPage Opti-Serve Model ICE and AM LEDs are on K5 Pin #7 R wire Page Bin Control Check Float Switch Check and Cleaning Float Switch CheckFloat Switch Cleaning Diagnostic Charts No Ice ProductionStartup Fill CycleIce Purge Cycle ShutdownIce/Water Dispense Ice Dispense Push ButtonIce Dispense Opti-Serve Water Dispense Push ButtonOpti-Serve OS Sensors 3a. Ice Dispense Continuous3b. Ice Dispense Portion 3c. Water DispenseRemoval and Replacement of Components Service for Refrigerant LinesBrazing Refrigerant RecoveryEvacuation and Recharge R-404A Important Notes for Component Replacement Evaporator Assembly Removal and Replacement of Extruding Head Upper Bearing Wear CheckRemoval and Replacement of Auger Removal and Replacement of EvaporatorPage 5b. Lower Housing Removal and Replacement of Gear Motor Dispense Auger and Agitator Dispense or Agitating MotorVI. Cleaning and Maintenance Cleaning and Sanitizing Instructions Water SystemSanitizing Solution Cleaning and Sanitizing Procedure Dispense ComponentsWater Dispense Nozzle Ice Dispense Spout Spout Cover Maintenance Schedule MaintenanceFrequency Area Task Preparing the Icemaker for Periods of Non-Use VII. Disposal

DCM 300BAH(-OS) specifications

The Hoshizaki DCM 300BAH(-OS) is a high-performance ice and water dispenser designed to meet the demands of various commercial environments. Known for its reliability and efficiency, this machine is widely used in restaurants, hotels, and catering services where a continuous supply of ice is essential.

One of the standout features of the DCM 300BAH(-OS) is its ability to produce crescent-shaped ice, which is favored in many settings for its hardness and slow-melting properties. This type of ice helps maintain the temperature of beverages longer without diluting them too quickly, making it ideal for mixed drinks and soft drinks alike.

Technology-wise, the Hoshizaki DCM 300BAH(-OS) integrates advanced refrigeration components that enhance energy efficiency. The machine is designed with a patented cooling system that reduces energy consumption while maintaining optimal ice production. Moreover, it is equipped with a highly efficient compressor that ensures quick recovery times even during peak usage.

One characteristic that sets this model apart is its space-saving design. With a footprint that allows for easy placement in tight quarters, it is particularly suited for establishments with limited counter space. The sleek and contemporary exterior also means it complements a variety of decor styles, making it a versatile addition to any commercial kitchen or bar.

The unit boasts a user-friendly interface, with easy-to-read indicators for ice and water levels, allowing staff to manage operations seamlessly. Additionally, the DCM 300BAH(-OS) features a self-cleaning cycle, which automates the sanitation process to ensure the utmost hygiene standards are maintained. This feature not only saves time but also enhances the longevity of the unit by reducing wear and tear.

Its durable construction is another strong point. Built from high-quality stainless steel, the DCM 300BAH(-OS) is resistant to corrosion and wear, ensuring it can withstand the rigors of daily use. Furthermore, Hoshizaki products are renowned for their reliability, and this model upholds that reputation, providing consistent performance with minimal downtime.

In summary, the Hoshizaki DCM 300BAH(-OS) stands out for its efficient ice production, innovative technology, space-saving design, user-friendly features, and robust durability, making it an ideal choice for any business that requires a reliable ice and water dispensing solution.
Top Page Image Contents