Grindmaster Model 3311 OPERATOR’S Safety Precautions, Freezer Application and Specifications

Page 4

OPERATOR’S SAFETY PRECAUTIONS

IMPORTANT: Failure to comply with the following safety precautions may result in severe personal injury or damage to the machine.

1.Read and understand the operating instructions in this manual thoroughly. Only allow properly trained persons to operate this machine.

2.Note all warning labels on the freezer. If any warning labels are missing or damaged replace them immediately.

3.Do not wear loose fitting garments or jewelry which could cause a serious accident.

4.Stay alert at all times during operation.

5.Keep operating area clean.

6.Do not attempt any repairs unless the main power supply to the freezer has been disconnected. Contact Grindmaster Technical Service for service assistance.

7.Do not put objects or fingers in the dispense plunger.

8.Do not operate freezer if any excessive noise or vibration occurs. Contact your authorized service agent.

9.Be certain machine is installed with adequate space for proper air circulation. (See installation section.) Failure to provide sufficient ventilation will reduce freezer performance and void equipment warranty.

Located on the right, left and rear panels. (part # W0600218)

FREEZER APPLICATION AND SPECIFICATIONS

Model 3311

The freezer consists of a freezing cylinder with a rotating internal auger (dasher) that is belt-driven by an electric motor. The auger scrapes frozen product off of the inside of the refrigerated cylinder. A torque sensing mechanism controls compressor operation to maintain desired product consistency. The freezer utilizes either an air-cooled or water-cooled refrigeration system to freeze the product. A self-closing dispensing valve is attached to the front of the freezing cylinder. The unit has an adjustable consistency control and an out of product indicator.

When properly operated and cared for, the Model 3311 will provide many years of service. Proper care includes regular cleaning and maintenance. To minimize the amount of maintenance necessary, follow the operating procedures outlined in this manual.

Product Tips

The Model 3311 was designed to dispense a wide variety of frozen beverages including frozen fruit juice, frozen lemonade, slush and frozen cocktails. These products can be served in consistencies ranging from thin to fairly thick.

Two types of dispensing valve plungers and product consistency springs are available depending on the thickness of the product being served. These parts are interchangeable depending upon your needs. One plunger, part W0480438 has one horizontal outlet slot and is used to serve thin to medium products such as frozen lemonade and slush. The other plunger, part W0480451 has two horizontal outlet slots and is used to serve thicker product such as neutral base frozen cocktails. A red spring, part W0631239, is used on the drive motor to adjust product consistency to serve thin to medium products. The yellow spring, part W0631238, is used for thicker product. The spring is locat- ed next to the drive motor behind the right hand side panel.

Over an extended period of time, some products, such as frozen cocktails that contain alcohol, have a tendency to separate, or stratify. Separation of product on the mix storage hopper can result in frozen product quality inconsis- tency. Simply keeping the product, in the mix storage hopper, stirred on a regular basis will eliminate this problem.

Page 2

Model 3311

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model 3311 Beverage Freezer Manual Page Table of Contents OPERATOR’S Safety Precautions Freezer Application and SpecificationsModel Product TipsFreezer Specifications Carburetor AssemblyMix Considerations General Installation Shipment TransitWill cause serious damage to spinner Avoid injuryReview hopper contents to make sure all parts are available Operation and Adjustments Accessory InstallationHow to Operate Mix Low FunctionConsistency Adjustment Figure JDisassembly and Cleaning Care and CleaningDrain and Rinse Tight. Do not use tools to tighten knobs Sanitizing and Refilling Figure CC Insert Retaining PinMaintenance Clean-In-Place Procedure Daily CleaningSuggested Daily Maintenance Parts Replacement SchedulePreventative Maintenance Procedure Every 6 to 12 Months How to Clean Exposed Filter Air-Cooled Unit Only How to Clean Concealed Filter Air-Cooled Unit OnlyHow to Adjust Belt How to Change Back Lit Sign Merchandiser BulbGeneral Troubleshooting Problem Probable Cause RemedyCheck List Exploded View Model 115V Air-Cooled Model Description Item noExploded View Model 220V Air-Cooled Model Part Number DescriptionExploded View Model 115V Water-Cooled Model Model Base Assembly 115V Air-Cooled Model Part Description NumberModel Base Assembly 220V Air-Cooled Model Part Number DescriptionModel Base Assembly 115V Water-Cooled Model Model Electrical Box Assembly 115V Model AC/WC Units Model Electrical Box Assembly 220V Air-Cooled Model Model Wiring Diagram 115V Air-Cooled Model Model Wiring Diagram 220V Air-Cooled Model Model Wiring Diagram Water-Cooled Model Model 3311 Compressor Wiring Model Ladder Diagram 115V Air-Cooled Model Model Ladder Diagram 220V Air-Cooled Model Model Ladder Diagram 115V Water-Cooled Model Model 3311 AC/WC Units Spinner Hook-Up 115V Model 220V Model Model Refrigeration 115V Air-Cooled Model Model Refrigeration 220V Air-Cooled Model Model Refrigeration 115V Water-Cooled Model Model Refrigeration Schematic AC Units 115V & 220V Models Model Refrigeration Schematic Water-Cooled Model Model Grindmaster Corporation Form # WH-312-03 W0600110

Model 3311 specifications

The Grindmaster Model 3311 is a state-of-the-art coffee grinder designed for commercial use, particularly favored by coffee shops and restaurants that prioritize precision and consistency in their coffee preparation. This grinder stands out for its robust construction, user-friendly features, and advanced grinding technologies.

One of the main features of the Grindmaster Model 3311 is its high-capacity grinding capabilities. The grinder is equipped with a powerful motor that allows for fast and efficient operation, making it an ideal choice for high-demand environments. It can handle large volumes of beans, grinding them quickly without overheating, which ensures that the coffee's essential flavors and aromas are preserved.

Technologically, the Model 3311 utilizes a set of precision-engineered burrs to achieve uniform particle size. This is crucial because consistent grind size is essential for optimal extraction during brewing, directly impacting the taste and quality of the coffee. The burrs are designed for longevity and can be easily adjusted to customize the grind settings based on the specific needs of different coffee beverages.

Another significant characteristic of the Grindmaster Model 3311 is its intuitive control panel, which allows baristas to easily adjust grind settings and monitor the grinding process. The user-friendly interface features clear indicators and easy-to-use buttons, making it accessible for staff at all skill levels. This design ensures that any operator can quickly become proficient in using the grinder, leading to improved efficiency in busy café environments.

The grinder also features a large bean hopper, capable of holding a considerable amount of coffee beans, which reduces the frequency of refills. This is particularly beneficial during peak service hours, allowing for uninterrupted operation. Additionally, the grind chamber has anti-static technology, minimizing coffee dust and ensuring a clean workspace.

Maintenance is straightforward with the Grindmaster Model 3311, thanks to its accessible design. Regular cleaning and upkeep are essential for maintaining performance, and the model has been engineered to facilitate these tasks without needing extensive disassembly.

In conclusion, the Grindmaster Model 3311 is a remarkable coffee grinder that combines robust performance with user-friendly features. Its high-capacity grinding, advanced burr technology, intuitive controls, and easy maintenance make it a top choice for coffee professionals who demand quality and efficiency. With this grinder, users can expect to deliver exceptional coffee experiences to their customers every time.
Top Page Image Contents