Russound Optimize Your Audio System with CAV6.6 from

INSTALLER

INSTALLATION MENU

SOURCE NAMES (SrcNm)

This procedure allows the installer to customize the source names for the sources attached to the CAV6.6. See Source Setup Menu on Page 50 and Source Names/Vol Trim - Flow

Chart on page 64

1.	SOURCE NUM –	Select the source number this name will be assigned to.
	(Src #)
2.	SOURCE NAME –	Select the name. SOURCE NUM will reappear on the LCD panel;
	(Name)	repeat the instructions for each source to be labeled.

SRC VOL TRIM (SrcVT)

This procedure allows the installer to adjust the output level of an individual source. The output vol- ume is adjustable by 16 dB. At 0 dB (the default setting), the volume is at max output; at -16 dB the volume is at the lowest setting possible for that source only. See Source Setup Menu on Page 50 and Source Names/Vol Trim - Flow Chart on page 64

1. SOURCE NUM –Select the source number this level will be set for. (Src #)

2. TRIM LEVEL –	0 dB is max output volume, -16 dB is lowest setting.
(Trim)

NUMERIC IR (NumIR)

Numeric IR allows the installer to program source specific number functions (Channel 12, Disk 89, etc.).

See Source Setup Menu on Page 50 and Numeric IR - Flow Chart on page 65

1. SOURCE NUM –	Select the source number this function will be configured for.
(Src #)

2.USE NUM IR? – (NumIR)

Tells the system whether the source component has numeric scrolling, such as 100-disc CD player. A selection of “no” dis- ables Numeric IR and advances to SAVE CHANGES

3.	HIGHEST NUM –	Enter the highest possible number; for example, the 100-disc CD
	(High#)	player would have a max number of 100.
4.	NUMERIC TEXT –	Select Numeric descriptive text.
	(NmTxt)
5.	PREFIX CMD –	Tells the system whether a command will be issued prior to the
	(Prefx)	selection of the numerical value (e.g., Disc 1,2). If “no,” proce
		dure advances to SUFFIX CMD (step 9)
6.	COMMAND TYPE –	Select the type of command (e.g., CD, TV, etc.).
	(CmdTp)

53