Jackson technical manual Avenger HT Avenger LT

Page 16

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

PROGRAMMING INSTRUCTIONS FOR CHEMICAL FEEDER PUMPS (FOR INSTALLATION TECHNICIAN ONLY)

To access the programming mode, the machine must be ON, and idle (between cycles).

On the timer board, press and hold both the MOVE and ENTER buttons on the timer board simultaneously for two seconds.

The PROGRAM (PGM) light and light A will illuminate.

Note: Once in the programming mode, the MOVE button is used to scroll between the programming categories and the ENTER button is used to select the category.

Press the MOVE button to move the solid light to the desired location of FILL, RINSE AID, DETERGENT or SANITIZER. Please note that options A, B, C, and D are not adjustable outputs.

Press the ENTER button for the chosen category. Now, the (PGM) light will illuminate along with lights corresponding to the time values for the chosen category. The ACCEPT light will blink.

The PROGRAM light will illuminate.

To change the value of a parameter, use the MOVE button to illuminate the light next to the time option (time is in seconds). In the time categories, each second in use will light up. To deselect the option, press ENTER and the light will go off, press ENTER again and it will illuminate. Once you have set your time category, press the MOVE button until the ACCEPT light illuminates and press ENTER. This will save the changed parameters.

Once you press the ENTER button when the ACCEPT light is blinking you will exit the programming mode. To change any other values, you will have to return to the programming mode. To revert back to a previous setting, you must return to that option and change the parameter back to the previous setting.

Once in the programming mode, if there have been no keypad inputs for approximately 2 minutes, the system will automati- cally exit out of the programming mode. Any changes to parameters will be saved when the programming mode is automati- cally exited.

The wash and drain settings are not adjustable.

All time adjustments are in seconds. Refer to the chart below for the adjustable outputs.

Timer Programming Board

`

Time in seconds.

AvengerHT

AvengerLT

 

 

 

 

Not adjustable

Rinse Aid

 

 

 

 

Rinse

Fill

 

 

 

 

Detergent

Sanitizer

 

 

 

 

Rinse Aid

Detergent

 

 

 

 

 

 

 

 

 

Avenger™ Series Technical Manual 7610-003-34-01 Rev. A

Issued: 05-02-2007 Revised: N/A

10

Image 16
Contents INSTALLATION/OPERATION Technical Manual For Jackson ModelsManufacturers Warranty ONE Year Limited Parts & Labor WarrantyStop Pare Arret Revision Date Made Applicable By ECN Details Model Serial No Installation Date Service Rep. Name Phone No Nomenclature for the Models Covered in this ManualTable of Contents Section Specification Information Specification Information Specifications of the Avengerlt Temperatures Electrical RequirementsOperating Cycle Seconds Wash Time AvengerLTAvengerHT Dimensions AvengerLT Dimensions Section INSTALLATION/OPERATION Instructions Installation Instructions INSTALLATION/OPERATION InstructionsWater Supply Connection for Machines with a Water Hardness Electrical Installation Instructions To Prepare Chemical Feeder Pumps for Operation Chemical Dispensing EquipmentPriming Chemical Feeder Pumps Avenger HT Avenger LT Detergent Control Operation Instructions Operation Instructions /DELIMING Instructions Section Preventative Maintenance Preventative Maintenance Section Troubleshooting Troubleshooting Section Common ProblemsProblem Water overflow from bottom of door Problem Wash motor doesn’t operate on manual washProblem Rinse water not at required temperature range Problem No indication of pressureSection Parts Section Parts Section Control Panel Weldment AssembliesControl Panel ASSEMBLY/KICK Panel Weldment Avengerht Complete Control Panel AssemblyQTY Description Mfg. NoControl Panel ASSEMBLY/KICK Panel Weldment Avengerlt Terminal Block BOX Assembly Chemical Feeder Pump Assembly Avengerht Complete Chemical Feeder Pump Assembly 05700-003-32-03Chemical Feeder Pump Assembly Avengerht QTY Description Chemical Feeder Pump Assembly Avengerlt Complete Chemical Feeder Pump Assembly 05700-003-33-32Chemical Feeder Pump Assembly Avengerlt QTY Description Chemical Feeder Pump Components Complete Incoming Plumbing Assembly 05700-003-36-32 Vacuum Plumbing Assembly 05700-003-32-14Plumbing Assemblies Avengerht Plumbing Assemblies Avengerlt Plumbing AssemblyComplete Incoming Complete Vacuum Breaker Assembly, 1/2 NPT Complete 110 Volt Solenoid Valve Assembly, 1/2Coil & Housing only, 1/2 05700-002-64-67 Complete 220 Volt Solenoid Valve Assembly, 1/2Wash MOTOR/DRAIN PLUMBING/ Avengerlt Wash Manifold Assembly Area within this box is an overallHub, Discharge Machined AvengerHT Shown Motor & Pump Assembly Other parts not shownWash Arm Assembly 2 per AvengerLT 1 per AvengerHT Rinse ARM & Wash ARM AssembliesThermostat & Rinse Tank Assembly Complete Rinse Tank Assembly Avengerht Only 05700-003-31-94Door Assembly Complete Door Assembly 05700-003-32-09Door Assembly QTY Description Miscellaneous Door Components Frame & Panel Components Miscellaneous Parts Stand Assembly Stands & ComponentsHTS-11 Scale Prevention & Corrosion Control Device GO BOX KIT Section Electrical Schematics Electrical Schematics AvengerHT 208-230 Volt 60 Hertz Single PhaseAvengerLT 115 Volt 60 Hertz Single Phase Section Jackson Maintenance Repair Centers Jackson Maintenance & Repair Centers Alabama to FloridaService CO Florida to MarylandJackson Service Compa Maryland to NEW YorkCertified Service Center Rons Service NEW York to PennsylvaniaRhode Island to Wisconsin CENTER, INCWisconsin to WYOMING/INTERNATIONAL
Related manuals
Manual 2 pages 9.06 Kb Manual 2 pages 17.61 Kb

Avenger HT, Avenger LT specifications

The Jackson Avenger HT and Avenger LT are two outstanding models in the Jackson line of guitars renowned for their exceptional playability, tonal versatility, and innovative features. Both models cater to a wide range of playing styles, from rock and metal to blues and jazz, making them suitable instruments for musicians at any level.

The Avenger HT is designed for those who seek the aggressive tonal characteristics and performance features typically associated with hard rock and metal genres. One of its standout features is the high-output humbucker pickups that deliver a powerful, punchy sound while maintaining clarity and responsiveness. Coupling these pickups with an ergonomic body shape ensures comfort during extended playing sessions, allowing artists to perform confidently.

In contrast, the Avenger LT emphasizes a lighter design while maintaining a robust tone and superior playability. This model incorporates a unique combination of tonewoods, which optimizes resonance and sustain. The lightweight body eases the burden of long performances, making it a favorite among players who prioritize comfort without sacrificing sound quality.

Both the HT and LT models feature advanced technologies such as locking tuners, which provide tuning stability and facilitate quick string changes. This feature is especially appreciated by performing musicians who need to maintain pitch accuracy throughout a set. Additionally, each model boasts a modern neck profile designed for speed and ease of play, perfect for intricate solos and swift chord changes.

Another remarkable aspect of the Avenger series is the use of high-quality finishes that not only enhance the aesthetic appeal but also provide added durability. Each guitar is crafted with meticulous attention to detail, resulting in a striking, professional-grade instrument that stands the test of time.

For those seeking versatility, the Avenger HT and LT come equipped with various control options, including coil-splitting capabilities. This allows players to switch between humbucker and single-coil sounds, opening up a world of tonal possibilities with a simple flick of a switch.

In summary, the Jackson Avenger HT and LT guitars stand out for their exceptional craftsmanship, innovative features, and versatile playability. Whether you prefer the heavier sound and feel of the HT or the lightweight comfort of the LT, both models offer musicians the tools they need to excel in their musical endeavors. With their striking designs, advanced technology, and affordability, these guitars are a worthy addition to any player's collection.