Jackson Avenger HT Specifications of the Avengerlt, Operating Cycle Seconds Wash Time, AvengerLT

Page 9

SECTION 1: SPECIFICATION INFORMATION

SPECIFICATIONS of the AVENGERLT

PERFORMANCE/CAPABILITIES

OPERATING CAPACITY (RACKS/HOUR)

RACKS PER HOUR

DISHES PER HOUR

GLASSES PER HOUR

OPERATING CYCLE (SECONDS) WASH TIME

DRAIN TIME

RINSE TIME

TOTAL CYCLE TIME

TEMPERATURES

ELECTRICAL REQUIREMENTS

WASH MOTOR HP

3/4

24

NOTE: Typical Electrical Circuit is based upon (1) 125% of the

600full amperage load of the machine and (2) typical fixed-trip cir-

600cuit breaker sizes as listed in the NEC 2002 Edition. Local

codes may require more stringent protection than what is dis- played here. Always verify with your electrical service con- tractor that your circuit protection is adequate and meets all applicable national and local codes. These numbers are pro-

56

vided in this manual simply for reference and may change

26

without notice at any given time.

 

35

 

120

AvengerLT:

 

 

 

 

 

 

 

 

 

 

 

 

RINSE

 

TYPICAL

 

 

 

HEATER

TOTAL

ELECTRICAL

 

VOLTS PH

HZ

RATINGS

AMPS

CIRCUIT

WASH ---

(MINIMUM)

(48.9°C) 120°F

WASH ---

(RECOMMENDED)

(60°C) 140°F

RINSE ---

(MINIMUM)

(48.9°C) 120°F

RINSE ---

(RECOMMENDED)

(60°C) 140°F

WATER REQUIREMENTS

 

INLET TEMPERATURE (RECOMMENDED)

(60°C) 140°F

INLET TEMPERATURE (MINIMUM)

(48.9°C) 120°F

WATER LINE SIZE I.P.S. (MINIMUM)

1/2”

DRAIN LINE SIZE I.P.S. (MINIMUM)

1 1/2”

FLOW PRESSURE P.S.I.

20 ±5

MINIMUM CHLORINE REQUIRED (PPM)

50

115

1

60

N/A

14 A

20 AMP

NOTE: Always refer to the machine data plate for specific electrical and water requirements. The material provided on this page is for reference only and may be subject to change without notice.

Avenger™ Series Technical Manual 7610-003-34-01 Rev. A

Issued: 05-02-2007 Revised: N/A

3

Image 9
Contents For Jackson Models INSTALLATION/OPERATION Technical ManualONE Year Limited Parts & Labor Warranty Manufacturers WarrantyStop Pare Arret Revision Date Made Applicable By ECN Details Nomenclature for the Models Covered in this Manual Model Serial No Installation Date Service Rep. Name Phone NoTable of Contents Section Specification Information Specification Information Temperatures Electrical Requirements Specifications of the AvengerltOperating Cycle Seconds Wash Time AvengerLTAvengerHT Dimensions AvengerLT Dimensions Section INSTALLATION/OPERATION Instructions INSTALLATION/OPERATION Instructions Installation InstructionsWater Supply Connection for Machines with a Water Hardness Electrical Installation Instructions Chemical Dispensing Equipment To Prepare Chemical Feeder Pumps for OperationPriming Chemical Feeder Pumps Avenger HT Avenger LT Detergent Control Operation Instructions Operation Instructions /DELIMING Instructions Section Preventative Maintenance Preventative Maintenance Section Troubleshooting Common Problems Troubleshooting SectionProblem Water overflow from bottom of door Problem Wash motor doesn’t operate on manual washProblem No indication of pressure Problem Rinse water not at required temperature rangeSection Parts Section Control Panel Weldment Assemblies Parts SectionComplete Control Panel Assembly Control Panel ASSEMBLY/KICK Panel Weldment AvengerhtQTY Description Mfg. NoControl Panel ASSEMBLY/KICK Panel Weldment Avengerlt Terminal Block BOX Assembly Complete Chemical Feeder Pump Assembly 05700-003-32-03 Chemical Feeder Pump Assembly AvengerhtChemical Feeder Pump Assembly Avengerht QTY Description Complete Chemical Feeder Pump Assembly 05700-003-33-32 Chemical Feeder Pump Assembly AvengerltChemical Feeder Pump Assembly Avengerlt QTY Description Chemical Feeder Pump Components Vacuum Plumbing Assembly 05700-003-32-14 Complete Incoming Plumbing Assembly 05700-003-36-32Plumbing Assemblies Avengerht Plumbing Assembly Plumbing Assemblies AvengerltComplete Incoming Complete 110 Volt Solenoid Valve Assembly, 1/2 Complete Vacuum Breaker Assembly, 1/2 NPTCoil & Housing only, 1/2 05700-002-64-67 Complete 220 Volt Solenoid Valve Assembly, 1/2Area within this box is an overall Wash MOTOR/DRAIN PLUMBING/ Avengerlt Wash Manifold AssemblyHub, Discharge Machined AvengerHT Shown Other parts not shown Motor & Pump AssemblyRinse ARM & Wash ARM Assemblies Wash Arm Assembly 2 per AvengerLT 1 per AvengerHTComplete Rinse Tank Assembly Avengerht Only 05700-003-31-94 Thermostat & Rinse Tank AssemblyComplete Door Assembly 05700-003-32-09 Door AssemblyDoor Assembly QTY Description Miscellaneous Door Components Frame & Panel Components Miscellaneous Parts Stands & Components Stand AssemblyHTS-11 Scale Prevention & Corrosion Control Device GO BOX KIT Section Electrical Schematics AvengerHT 208-230 Volt 60 Hertz Single Phase Electrical SchematicsAvengerLT 115 Volt 60 Hertz Single Phase Section Jackson Maintenance Repair Centers Alabama to Florida Jackson Maintenance & Repair CentersFlorida to Maryland Service COMaryland to NEW York Jackson Service CompaNEW York to Pennsylvania Certified Service Center Rons ServiceCENTER, INC Rhode Island to WisconsinWisconsin to WYOMING/INTERNATIONAL
Related manuals
Manual 2 pages 9.06 Kb Manual 2 pages 17.61 Kb

Avenger HT, Avenger LT specifications

The Jackson Avenger HT and Avenger LT are two outstanding models in the Jackson line of guitars renowned for their exceptional playability, tonal versatility, and innovative features. Both models cater to a wide range of playing styles, from rock and metal to blues and jazz, making them suitable instruments for musicians at any level.

The Avenger HT is designed for those who seek the aggressive tonal characteristics and performance features typically associated with hard rock and metal genres. One of its standout features is the high-output humbucker pickups that deliver a powerful, punchy sound while maintaining clarity and responsiveness. Coupling these pickups with an ergonomic body shape ensures comfort during extended playing sessions, allowing artists to perform confidently.

In contrast, the Avenger LT emphasizes a lighter design while maintaining a robust tone and superior playability. This model incorporates a unique combination of tonewoods, which optimizes resonance and sustain. The lightweight body eases the burden of long performances, making it a favorite among players who prioritize comfort without sacrificing sound quality.

Both the HT and LT models feature advanced technologies such as locking tuners, which provide tuning stability and facilitate quick string changes. This feature is especially appreciated by performing musicians who need to maintain pitch accuracy throughout a set. Additionally, each model boasts a modern neck profile designed for speed and ease of play, perfect for intricate solos and swift chord changes.

Another remarkable aspect of the Avenger series is the use of high-quality finishes that not only enhance the aesthetic appeal but also provide added durability. Each guitar is crafted with meticulous attention to detail, resulting in a striking, professional-grade instrument that stands the test of time.

For those seeking versatility, the Avenger HT and LT come equipped with various control options, including coil-splitting capabilities. This allows players to switch between humbucker and single-coil sounds, opening up a world of tonal possibilities with a simple flick of a switch.

In summary, the Jackson Avenger HT and LT guitars stand out for their exceptional craftsmanship, innovative features, and versatile playability. Whether you prefer the heavier sound and feel of the HT or the lightweight comfort of the LT, both models offer musicians the tools they need to excel in their musical endeavors. With their striking designs, advanced technology, and affordability, these guitars are a worthy addition to any player's collection.