Jackson Avenger LT, Avenger HT Manufacturers Warranty, ONE Year Limited Parts & Labor Warranty

Page 2

MANUFACTURERS WARRANTY

ONE YEAR LIMITED PARTS & LABOR WARRANTY

ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM DEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONE YEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATE OF SHIPMENT FROM THE FACTORY.

Jackson MSC agrees under this warranty to repair or replace , at its discretion, any original part which fails under normal use due to faulty material or workmanship during the warranty period, providing the equipment has been unaltered, and has been properly installed, main- tained and operated in accordance with the applicable factory instruction manual furnished with the machine and the failure is reported to the authorized service agency within the warranty period. This includes the use of factory specified genuine replacement parts, purchased directly from a Jackson authorized parts distributor or service agency. Use of generic replacement parts may create a hazard and void war- ranty certification.

The labor to repair or replace such failed part will be paid by Jackson MSC, within the continental United States, Hawaii and Canada, during the warranty period provided a Jackson MSC authorized service agency, or those having prior authorization from the factory, performs the service. Any repair work by persons other than a Jackson MSC authorized service agency is the sole responsibility of the customer. Labor coverage is limited to regular hourly rates, overtime premiums and emergency service charges will not be paid by Jackson MSC.

Accessory components not installed by the factory carry a (1) one year parts warranty only. Accessory components such as table limit switch- es, pressure regulators, pre rinse units, etc. that are shipped with the unit and installed at the site are included. Labor to repair or replace these components is not covered by Jackson MSC.

This warranty is void if failure is a direct result from shipping, handling, fire, water, accident, misuse, acts of god, attempted repair by unau- thorized persons, improper installation, if serial number has been removed or altered, or if unit is used for purpose other than it was origi- nally intended.

TRAVEL LIMITATIONS

Jackson MSC limits warranty travel time to (2) two hours and mileage to (100) one hundred miles. Jackson MSC will not pay for travel time and mileage that exceeds this, or any fees such as those for air or boat travel without prior authorization.

WARRANTY REGISTRATION CARD

The warranty registration card supplied with the machine must be returned to Jackson MSC within 30 days to validate the warranty.

REPLACEMENT PARTS WARRANTY

Jackson replacement parts are warranted for a period of 90 days from the date of installation or 180 days from the date of shipment from the factory, which ever occurs first.

PRODUCT CHANGES AND UPDATES

Jackson MSC reserves the right to make changes in design and specification of any equipment as engineering or necessity requires.

THIS IS THE ENTIRE AND ONLY WARRANTY OF JACKSON MSC. JACKSON’S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUDING NEGLIGENCE, WITH RESPECT TO THE GOODS OR SERVICES COVERED HEREUNDER, SHALL IN NO CASE EXCEED THE PRICE OF THE GOODS OR SERVICES OR PART THEREOF WHICH GIVES RISE TO THE CLAIM.

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING FOR FITNESS OR MERCHANTABILITY, THAT ARE NOT SET FORTH HEREIN, OR THAT EXTEND BEYOND THE DURATION HEREOF. UNDER NO CIRCUMSTANCES WILL JACKSON MSC BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, OR FOR THE DAMAGES IN THE NATURE OF PENALTIES, ARISING OUT OF THE USE OR INABILITY TO USE ANY OF ITS PRODUCTS.

ITEMS NOT COVERED

This warranty does not cover cleaning or deliming of the unit or any component such as, but not limited to, wash arms, rinse arms or strain- ers at anytime. Nor does it cover adjustments such as, but not limited to timer cams, thermostats or doors, beyond 30 days from the date of installation. In addition, the warranty will only cover the replacement of wear items such as curtains, drain balls, door guides or gaskets during the first 30 days after installation. Also, not covered are conditions caused by the use of incorrect (non-Commercial) grade detergents, incorrect water temperature or pressure, or hard water conditions.

Image 2
Contents INSTALLATION/OPERATION Technical Manual For Jackson ModelsManufacturers Warranty ONE Year Limited Parts & Labor WarrantyStop Pare Arret Revision Date Made Applicable By ECN Details Model Serial No Installation Date Service Rep. Name Phone No Nomenclature for the Models Covered in this ManualTable of Contents Section Specification Information Specification Information Operating Cycle Seconds Wash Time Specifications of the AvengerltTemperatures Electrical Requirements AvengerLTAvengerHT Dimensions AvengerLT Dimensions Section INSTALLATION/OPERATION Instructions Water Supply Connection for Machines with a Water Hardness INSTALLATION/OPERATION InstructionsInstallation Instructions Electrical Installation Instructions Priming Chemical Feeder Pumps Chemical Dispensing EquipmentTo Prepare Chemical Feeder Pumps for Operation Avenger HT Avenger LT Detergent Control Operation Instructions Operation Instructions /DELIMING Instructions Section Preventative Maintenance Preventative Maintenance Section Troubleshooting Problem Water overflow from bottom of door Troubleshooting SectionCommon Problems Problem Wash motor doesn’t operate on manual washProblem Rinse water not at required temperature range Problem No indication of pressureSection Parts Section Parts Section Control Panel Weldment AssembliesQTY Description Control Panel ASSEMBLY/KICK Panel Weldment AvengerhtComplete Control Panel Assembly Mfg. NoControl Panel ASSEMBLY/KICK Panel Weldment Avengerlt Terminal Block BOX Assembly Chemical Feeder Pump Assembly Avengerht Complete Chemical Feeder Pump Assembly 05700-003-32-03Chemical Feeder Pump Assembly Avengerht QTY Description Chemical Feeder Pump Assembly Avengerlt Complete Chemical Feeder Pump Assembly 05700-003-33-32Chemical Feeder Pump Assembly Avengerlt QTY Description Chemical Feeder Pump Components Plumbing Assemblies Avengerht Vacuum Plumbing Assembly 05700-003-32-14Complete Incoming Plumbing Assembly 05700-003-36-32 Complete Incoming Plumbing AssemblyPlumbing Assemblies Avengerlt Coil & Housing only, 1/2 05700-002-64-67 Complete Vacuum Breaker Assembly, 1/2 NPTComplete 110 Volt Solenoid Valve Assembly, 1/2 Complete 220 Volt Solenoid Valve Assembly, 1/2Wash MOTOR/DRAIN PLUMBING/ Avengerlt Wash Manifold Assembly Area within this box is an overallHub, Discharge Machined AvengerHT Shown Motor & Pump Assembly Other parts not shownWash Arm Assembly 2 per AvengerLT 1 per AvengerHT Rinse ARM & Wash ARM AssembliesThermostat & Rinse Tank Assembly Complete Rinse Tank Assembly Avengerht Only 05700-003-31-94Door Assembly Complete Door Assembly 05700-003-32-09Door Assembly QTY Description Miscellaneous Door Components Frame & Panel Components Miscellaneous Parts Stand Assembly Stands & ComponentsHTS-11 Scale Prevention & Corrosion Control Device GO BOX KIT Section Electrical Schematics Electrical Schematics AvengerHT 208-230 Volt 60 Hertz Single PhaseAvengerLT 115 Volt 60 Hertz Single Phase Section Jackson Maintenance Repair Centers Jackson Maintenance & Repair Centers Alabama to FloridaService CO Florida to MarylandJackson Service Compa Maryland to NEW YorkCertified Service Center Rons Service NEW York to PennsylvaniaRhode Island to Wisconsin CENTER, INCWisconsin to WYOMING/INTERNATIONAL
Related manuals
Manual 2 pages 9.06 Kb Manual 2 pages 17.61 Kb

Avenger HT, Avenger LT specifications

The Jackson Avenger HT and Avenger LT are two outstanding models in the Jackson line of guitars renowned for their exceptional playability, tonal versatility, and innovative features. Both models cater to a wide range of playing styles, from rock and metal to blues and jazz, making them suitable instruments for musicians at any level.

The Avenger HT is designed for those who seek the aggressive tonal characteristics and performance features typically associated with hard rock and metal genres. One of its standout features is the high-output humbucker pickups that deliver a powerful, punchy sound while maintaining clarity and responsiveness. Coupling these pickups with an ergonomic body shape ensures comfort during extended playing sessions, allowing artists to perform confidently.

In contrast, the Avenger LT emphasizes a lighter design while maintaining a robust tone and superior playability. This model incorporates a unique combination of tonewoods, which optimizes resonance and sustain. The lightweight body eases the burden of long performances, making it a favorite among players who prioritize comfort without sacrificing sound quality.

Both the HT and LT models feature advanced technologies such as locking tuners, which provide tuning stability and facilitate quick string changes. This feature is especially appreciated by performing musicians who need to maintain pitch accuracy throughout a set. Additionally, each model boasts a modern neck profile designed for speed and ease of play, perfect for intricate solos and swift chord changes.

Another remarkable aspect of the Avenger series is the use of high-quality finishes that not only enhance the aesthetic appeal but also provide added durability. Each guitar is crafted with meticulous attention to detail, resulting in a striking, professional-grade instrument that stands the test of time.

For those seeking versatility, the Avenger HT and LT come equipped with various control options, including coil-splitting capabilities. This allows players to switch between humbucker and single-coil sounds, opening up a world of tonal possibilities with a simple flick of a switch.

In summary, the Jackson Avenger HT and LT guitars stand out for their exceptional craftsmanship, innovative features, and versatile playability. Whether you prefer the heavier sound and feel of the HT or the lightweight comfort of the LT, both models offer musicians the tools they need to excel in their musical endeavors. With their striking designs, advanced technology, and affordability, these guitars are a worthy addition to any player's collection.