Jackson AJ-44CEL, AJ-80CEL, AJ-66CSL, AJ-66CGP, AJ-44CSL, AJ-80CS, AJ-66CEL Deliming Operations

Page 41

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

DELIMING OPERATIONS

DELIMING OPERATIONS: In order to maintain the dishmachine at its optimum performance level, it will be required to remove lime and corrosion deposits on a frequent basis. A deliming solution should be available from your detergent supplier. Read and follow all instructions on the label of the deliming solution.

To proceed with the deliming operation, fill the dishmachine and add the correct amount of deliming solution as recommended by the deliming solution manufacturer. The water capacity of the various tanks of the dishmachine can be verified on the spec- ification sheet(s) of this manual.

Perform the following operations to delime the dishmachine:

1.Turn the AUTOMATIC/DELIME switch on the back of the control box to the DELIME position.

2.Disconnect or turn off all chemical feeder pumps.

3.Close all doors (after adding the deliming solution).

4.Run the machine for the recommended period of time.

5. Turn the unit off and open the doors.

Delime Switch

 

6.Wait five minutes, then inspect the inside of the machine. If the machine is not delimed, run another time cycle as per the deliming solution’s instructions.

7.When clean, drain and re-fill the machine.

8.Run in MANUAL for 10 minutes to remove residual deliming solution.

9.Drain and re-fill the machine.

This equipment is not recommend for use with deionized water or other aggressive fluids. Use of deionized water or other aggressive fluids will result in corrosion and failure of materials and components. Use of deionized water or other aggressive fluids will void the manufacturer's warranty.

AJ-44C Series Technical Manual 7610-001-76-22

Issued: 03-21-2006 Revised: N/A

33

Image 41
Contents INSTALLATION/OPERATION Technical Manual ONE Year Limited Parts & Labor Warranty Manufacturers WarrantyStop Pare Arret Revision Made Applicable Details Date ECN Nomenclature for the Models Covered in this Manual AJ-44CSLTable of Contents D226 Steam Booster Section Parts Parts SectionSide Loader Section Viii Maintenance & Repair Centers Electrical SchematicsSection Specification Information Specification Information AJ-66CE/CEL Models AJ-44CE/CEL ModelsAJ-44CGP Models AJ-66CGP ModelsD226 Steam Booster AJ-80CE/CEL ModelsAJ-80CS/CSL Models Left to Right Specification Information AJ-44 Electric Left to RightAJ-44 Right to LeftInformation to Right Recommended Table FabricationLeft InformationAJ-44 GAS Right to Right AJ-44 Steam Left toSpecification Information AJ-44 Steam Right to Left Left to Right Specification Information AJ-66 Electric Left to RightRight to Left Specification Information AJ-66 GAS Left to Right AJ-66 GAS Right to Left to RightAJ-66 Steam Left to Right to Left Specification Information AJ-66 Steam Right to LeftLeft to Right Specification Information AJ-80 Electric Right to Left Left to Right Specification Information AJ-80 GAS Left to RightAJ-80 GAS Right to Right to LeftRecommended Table Fabrication AJ-80 Steam Left toRight to Left Specification Information AJ-80 Steam Right to LeftSection A-A Side Loader Left to Right DimensionsSide Loader Right to Left Dimensions Side Loader Installed Dimensions D226 Steam Booster Dimensions D226 Steam Booster Plumbing Line Drawings Rear View Typical Electric and GAS Booster DimensionsSection Installation & Operation Instructions Installation Instructions INSTALLATION/OPERATION InstructionsIncoming Power Connection Detergent Connection Point Machine rear view Deliming Operations Changing the AJ-44CE/CS Direction of Travel PreparationINSTALLATION/OPERATION Instructions Removing the bracket nut INSTALLATION/OPERATION Instructions

AJ-66CE, AJ-80CSL, AJ-44CS, AJ-66CGP, AJ-66CS specifications

The Jackson AJ series of guitars, including the AJ-44CEL, AJ-66CEL, AJ-44CSL, AJ-80CEL, and AJ-80CS, showcases a remarkable blend of craftsmanship and innovation. Built for guitarists who demand both performance and aesthetic appeal, these models feature a range of characteristics that make them standout instruments.

The AJ-44CEL is designed with a solid spruce top that enhances tonal clarity and projection. Its mahogany back and sides contribute warmth and resonance, making it suitable for a variety of playing styles. With a classic dreadnought body shape, it offers a balanced response across the frequency spectrum, ideal for both strumming and fingerpicking techniques. The Fishman Presys electronics system ensures that the natural tone of the instrument is preserved when amplified, providing versatility for live performances.

Similarly, the AJ-66CEL elevates the playing experience with its premium materials. A solid Sitka spruce top is paired with Indian rosewood back and sides, delivering a rich, full-bodied sound. The enhanced bracing pattern supports dynamic playing while reducing feedback during amplification. The cutaway design allows for easy access to the higher frets, making it a favorite among soloists.

The AJ-44CSL model takes a slightly different approach, featuring a shallow body depth. This design choice offers comfort during extended playing sessions while maintaining a surprisingly robust sound. Its body is constructed with a solid cedar top, offering a warmer tone with a quicker response time. The combination of the cedar top and mahogany back makes it perfect for fingerstyle guitarists who appreciate nuance and expressiveness in their music.

The AJ-80CEL and AJ-80CS models raise the bar with their detailed craftsmanship. The AJ-80CEL boasts a solid Sitka spruce top and a beautiful rosewood back and sides combination. Its ornate inlays and binding enhance the visual appeal, making it a visually striking option for stage performances. The AJ-80CS, on the other hand, features a solid cedar top and similarly stunning aesthetics, favored by players who crave a vintage look and feel.

All the guitars in the AJ series come equipped with quality hardware including comfortable neck profiles and premium tuners, ensuring that every musician can find their perfect fit. These models are constructed with an emphasis on durability and tonal integrity, providing players with an instrument that is not only appealing but also reliable for years to come. With their unique blend of aesthetics, functionality, and advanced technology, the Jackson AJ series is a testament to modern guitar making, designed for the discerning guitarist.