Miele F 1471 VI installation instructions Turning on the Ice/Water Dispenser

Page 21

Ice/Water Dispenser

For the automatic ice/water dispenser to operate, it must be connected to the household power and water supply.

Use sturdy glass when dispensing water or ice - risk of injury from broken glass!

Keep fingers clear of the dispenser opening. Risk of injury!

Turning on the Ice/Water Dispenser

Once the freezer has cooled to a freezing temperature, the ice cube tray filles with water. Cold air is blown directly over the tray.

As soon as the cubes are frozen they fall into the ice cube container.

When the ice cube container is full, the ice maker switches off automatically.

The ice cube maker produces:

cold water

ice cubes

crushed ice.

^Be sure the ice cube container is under the ice maker and has been inserted as far as possible.

Do not place any bottles or food for rapid cooling in the ice cube container. The ice maker could become blocked or damaged.

^Open the freezer door.

^Touch the "ice" button so it turns yellow.

^Close the freezer door.

The ice/water dispenser is now ready for use.

21

Image 21
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsInstallation Use Disposal of your old appliance Save These InstructionsGuide to the freezer Control panel for Ice/Water Dispenser Control panel for freezerBefore using for the first time Before useTurning the appliance On/Off Using the settings SettingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Alarm Temperature alarmDoor alarm Setting the temperature Setting the temperatureTemperature range Temperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyBefore placing food in the freezer Placing food in the freezerCooling drinks quickly DefrostingFreezing tips Packing tips Unsuitable packing materialSuitable packing material Switching off SuperCool Switching on SuperCoolSuperCool SuperCoolTurning on the Ice/Water Dispenser Ice/Water DispenserDispensing crushed ice Dispensing waterIce/Water Dispenser Using the Ice/Water Dispenser for the first time Safety lock LightingTurning off the Ice/Water dispenser Settings Entering the settings modeAnti-condensation heater Exiting the settings mode Anti-clumpingButton sound Automatic defrost Adjusting the interior fittings Moving the shelvesDoor shelf Replacing the freezer basket Freezer basketsCleaning and care Before cleaningCleaning the interior and accessories Aluminum frames Ice cube containerDrip tray After cleaning Ventilation slitsDoor seals Upper lighting Changing the light bulbSide lighting Ice/Water Dispenser lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Certificate Number Filter Performance Data SheetPerformance Data Sheet For Filter Model Frequently asked questions Door will not ApplianceOpen Compressor kicksAlarm indicator is Alarm is ringingLock indicator FlashingSwitch on Ice maker is notProducing any ice Ice/Water has SmallAn unpleasant Odor/flavorOr the ice cubes are Producing enough iceMisshapen Ice/Water dispenserMieleCare After sales serviceInstallation instructions Caring for the environment Disposal of packing materialsDisposal of an old appliance Installation site InstallationBase Installation nicheFurniture/fixtures VentilationCustom door panels Installation optionsSingle column Side-by-sideWith partition Side panelsDimensions Niche dimensionsNiche width a 1471 Door dimensions open minDimensions Tools needed for installation Installing the applianceBefore you begin OtherBefore installation Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Attaching and aligning the custom door front Attaching the covers Attaching the toe-kick panel Mounting the air separator Aligning the Ice/Water Dispenser Pull the rear cover forward and out Attaching the frame and the shelf Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options