Miele F 1471 VI installation instructions Installation

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Installation

This appliance is top-heavy and must be secured to prevent the possibility of tipping forward.

Keep the door closed until the appliance is completely installed and secured per installation instructions.

~Before installing the appliance, check for externally visible damage. Do not operate a damaged appliance.

~This appliance must be installed and connected in compliance with the installation instructions.

~The appliance must be properly installed before operation to ensure that no electrical components are accessible.

~Installation work and repairs should only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous.

Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held liable.

~Installation must comply with local plumbing regulations and state laws. The manufacturer cannot be held liable for damage caused by a faulty connection to the water supply.

~Connection to the water supply and any repairs to the ice maker must only be carried out by a suitably qualified person. The manufacturer cannot be held liable for damage caused by a faulty connection to the water supply.

~Before making plumbing connections, ensure the appliance is disconnected from the mains electricity supply.

~Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Ser- vice Department.

~This equipment is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft.

~Do not install the freezer in a room with too low an ambient temperature, e.g., a garage, as this may lead to the appliance switching off for longer periods so that it cannot maintain the required temperature.

~In appliances with an automatic ice maker, avoid contact with the moving parts of the ejector mechanism, or with the heating element located on the bottom of the ice maker. Do not place fingers or hands on the automatic ice making mechanism while the freezer is plugged in.

~The ice cube maker is not suitable for connection to a hot water supply.

~Do not use water that is microbiologically or chemically unsafe or of unknown quality without adequate disinfection or other treatment before or after the filter is used; the filter alone is not an adequate safeguard.

5

Image 5
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsInstallation Use Disposal of your old appliance Save These InstructionsGuide to the freezer Control panel for Ice/Water Dispenser Control panel for freezerTurning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Temperature range Setting the temperatureSetting the temperature Temperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyBefore placing food in the freezer Placing food in the freezerCooling drinks quickly DefrostingSuitable packing material Freezing tipsPacking tips Unsuitable packing material Switching off SuperCool Switching on SuperCoolSuperCool SuperCoolTurning on the Ice/Water Dispenser Ice/Water DispenserDispensing crushed ice Dispensing waterIce/Water Dispenser Using the Ice/Water Dispenser for the first time Turning off the Ice/Water dispenser Safety lockLighting Anti-condensation heater SettingsEntering the settings mode Button sound Exiting the settings modeAnti-clumping Automatic defrost Door shelf Adjusting the interior fittingsMoving the shelves Replacing the freezer basket Freezer basketsCleaning the interior and accessories Cleaning and careBefore cleaning Drip tray Aluminum framesIce cube container Door seals After cleaningVentilation slits Upper lighting Changing the light bulbSide lighting Ice/Water Dispenser lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Certificate Number Filter Performance Data SheetPerformance Data Sheet For Filter Model Frequently asked questions Door will not ApplianceOpen Compressor kicksAlarm indicator is Alarm is ringingLock indicator FlashingProducing any ice Switch onIce maker is not Ice/Water has SmallAn unpleasant Odor/flavorOr the ice cubes are Producing enough iceMisshapen Ice/Water dispenserMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation site InstallationBase Installation nicheFurniture/fixtures VentilationCustom door panels Installation optionsSingle column Side-by-sideWith partition Side panelsNiche width a DimensionsNiche dimensions 1471 Door dimensions open minDimensions Tools needed for installation Installing the applianceBefore you begin OtherBefore installation Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Attaching and aligning the custom door front Attaching the covers Attaching the toe-kick panel Mounting the air separator Aligning the Ice/Water Dispenser Pull the rear cover forward and out Attaching the frame and the shelf Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision