Miele F 1471 VI installation instructions Sliding the appliance into the installation niche

Page 64

Installing the appliance

Sliding the appliance into the installation niche

^Unscrew the plinth.

^To protect the corners of the installation space, attach the supplied edge protector a on both sides with adhesive tape.

^Plug the appliance into the power outlet b.

In the case of side-by-side installations, a separate outlet must be used for each appliance.

^To prevent the power cord from becoming caught:

Tie a piece of string to the middle of the power cord and feed it forward under the appliance. When sliding the appliance in, pull the cable forward c.

^Carefully slide the appliance into the space until the height-adjustable wheels interlock with the anti-tip brackets d.

If resistance is felt when attempting to slide the appliance into the installation niche - for example, because the floor is uneven,

^Turn the rear adjustable wheels slightly outward (see "Aligning the appliance"), then push the appliance in.

Be careful not to damage the water pipe or power cord attached to the floor.

^Remove the edge protector a.

64

Image 64
Contents En US, CA Contents Contents Important Safety Instructions Electrical safetyInstallation Use Save These Instructions Disposal of your old applianceGuide to the freezer Control panel for freezer Control panel for Ice/Water DispenserBefore use Before using for the first timeTurning the appliance On/Off Settings Using the settingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Temperature alarm AlarmDoor alarm Setting the temperature Setting the temperatureTemperature range Temperature unit Fahrenheit/Celsius Using the freezer efficiently Freezing foodBefore placing food in the freezer Placing food in the freezerDefrosting Cooling drinks quicklyPacking tips Unsuitable packing material Freezing tipsSuitable packing material Switching on SuperCool Switching off SuperCoolSuperCool SuperCoolIce/Water Dispenser Turning on the Ice/Water DispenserDispensing water Dispensing crushed iceIce/Water Dispenser Using the Ice/Water Dispenser for the first time Lighting Safety lockTurning off the Ice/Water dispenser Entering the settings mode SettingsAnti-condensation heater Anti-clumping Exiting the settings modeButton sound Automatic defrost Moving the shelves Adjusting the interior fittingsDoor shelf Freezer baskets Replacing the freezer basketBefore cleaning Cleaning and careCleaning the interior and accessories Ice cube container Aluminum framesDrip tray Ventilation slits After cleaningDoor seals Changing the light bulb Upper lightingSide lighting Ice/Water Dispenser lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Filter Performance Data Sheet Water Treatment Device Certificate NumberPerformance Data Sheet For Filter Model Frequently asked questions Appliance Door will notOpen Compressor kicksAlarm is ringing Alarm indicator isLock indicator FlashingIce maker is not Switch onProducing any ice Small Ice/Water hasAn unpleasant Odor/flavorProducing enough ice Or the ice cubes areMisshapen Ice/Water dispenserAfter sales service MieleCareInstallation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation Installation siteInstallation niche BaseFurniture/fixtures VentilationInstallation options Custom door panelsSingle column Side-by-sideSide panels With partitionNiche dimensions DimensionsNiche width a Door dimensions open min 1471Dimensions Installing the appliance Tools needed for installationBefore you begin OtherCheck the installation niche Before installationRemoteVision module installation Preparing the installation niche Anti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Attaching and aligning the custom door front Attaching the covers Attaching the toe-kick panel Mounting the air separator Aligning the Ice/Water Dispenser Pull the rear cover forward and out Attaching the frame and the shelf Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Status indicators Description of functionSelectable Description of function Options