Installing the appliance
^Loosen the bracket that holds the appliance to the pallet.
,Caution! The appliance is no longer secured and may be unstable.
^From the rear of the appliance carefully lift it from the pallet.
Once the appliance is on the ground it can be wheeled around.
RemoteVision module installation
^Unscrew the screws a on the cover b and pull off the sticker c.
^Remove the cover b.
Always disconnect the appliance from the power supply when performing installation, maintenance or service work.
Install the RemoteVision module before placing the appliance in its installation niche.
Once connected the RemoteVision modeul will increase the energy consumption of the appliance.
The slot for the RemoteVision module is located in the lower area of the back of your appliance.
^Push the module into the slot until it locks into place.
60